From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] Acer BT900 Headset profile From: Marcel Holtmann To: bluez-devel@lists.sourceforge.net In-Reply-To: <13e9886105042209171edb0fba@mail.gmail.com> References: <13e9886105042209171edb0fba@mail.gmail.com> Content-Type: text/plain Message-Id: <1114197531.32265.77.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 22 Apr 2005 21:18:51 +0200 Hi Carsten, > I am quite unsure whether my USB adapter supports everything I need, > but with Class 1 and and higher number in the name (BT900) than I saw > elsewhere I don't think that is a problem. > I was able to setup everything, but can't manage to get more than > noise out of my headset. Whenevery I play sounds (or pipe something > into /dev/dsp1) the noise starts and stops just when the sound is > finished. > Please tell me where the problem could be. > Some information: > - The headset is a Logitech Mobile Bluetooth Headset > - headset info: > Requesting information ... > BD Address: 00:0D:44:02:02:85 > Device Name: Logitech HS01 > LMP Version: 1.1 (0x1) LMP Subversion: 0x3f0 > Manufacturer: Cambridge Silicon Radio (10) > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > <3-slot packets> <5-slot packets> > > > > > - Connections: > < ACL 00:0D:44:02:02:85 handle 6 state 1 lm MASTER > - Playing a sound: > btsco v0.4a > Device is 1:0 > Voice setting: 0x0060 > RFCOMM channel 1 connected > speaker volume: 15 mic volume: 15 > driver is in use > connected SCO channel > Done setting sco fd > recieved AT+VGS=15 > Sending up speaker change 15 > - amixer: > Simple mixer control 'Master',0 > Capabilities: volume volume-joined > Playback channels: Mono > Limits: 0 - 15 > Mono: 15 [100%] > Simple mixer control 'Mic',0 > Capabilities: volume volume-joined > Playback channels: Mono > Limits: 0 - 15 > Mono: 15 [100%] > Simple mixer control 'Loopback',0 > Capabilities: pswitch pswitch-joined > Playback channels: Mono > Mono: Playback [on] > - /proc/bus/usb/devices > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0a5c ProdID=200a Rev= 0.01 > S: Manufacturer=Broadcom > S: Product=CCBT2035BDGP23-1 > S: SerialNumber=000272C32BDA > C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I marked the ISOC support for this dongle as broken and so you don't get any SCO data on the USB bus. So no headset connection possible. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel