From: Marcel Holtmann <marcel@holtmann.org>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] BNEP session hangs, can't work out why.
Date: Mon, 30 May 2005 13:57:05 +0200 [thread overview]
Message-ID: <1117454226.7072.135.camel@pegasus> (raw)
In-Reply-To: <4299F069.3080703@eridani.co.uk>
Hi Michael,
> At machine A I have:
> hci0: Type: USB
> BD Address: 00:05:16:58:9D:C1 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:269283 acl:1781 sco:0 events:869 errors:0
> TX bytes:58266 acl:815 sco:0 commands:42 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
> Manufacturer: Cambridge Silicon Radio (10)
>
> Machine B has:
> hci0: Type: USB
> BD Address: 00:0A:94:13:26:7D ACL MTU: 120:20 SCO MTU: 64:0
> UP RUNNING PSCAN ISCAN
> RX bytes:72835 acl:1541 sco:0 events:1813 errors:0
> TX bytes:266197 acl:2713 sco:0 commands:24 errors:0
> Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x757
> Manufacturer: Silicon Wave (11)
>
> Everything starts fine, I can get packets flowing.
>
> Then, without warning, the connection stalls.
>
> hcidump on A finishes off with:
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Disconn Complete (0x05) plen 4
> status 0x00 handle 41 reason 0x13
> Reason: Remote User Terminated Connection
>
> Machine B reports:
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
> L2CAP(d): cid 0x0040 len 63 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 59
> L2CAP(d): cid 0x0040 len 55 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
> L2CAP(d): cid 0x0040 len 63 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 59
> L2CAP(d): cid 0x0040 len 55 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 24
> L2CAP(d): cid 0x0040 len 260 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 9
> L2CAP(d): cid 0x0040 len 365 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
> L2CAP(d): cid 0x0040 len 63 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 38
> L2CAP(d): cid 0x0040 len 274 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 94
> L2CAP(d): cid 0x0040 len 570 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 73
> L2CAP(d): cid 0x0040 len 789 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < HCI Command: Disconnect (0x01|0x0006) plen 3
> handle 2 reason 0x13
> Reason: Remote User Terminated Connection
> 20.000000 > HCI Event: Command Status (0x0f) plen 4
> Disconnect (0x01|0x0006) status 0x00 ncmd 1
> 20.000000 > HCI Event: Disconn Complete (0x05) plen 4
> status 0x00 handle 2 reason 0x16
> Reason: Connection Terminated by Local Host
>
> (Aside: The timestamps in hcidump don't appear to be working right.)
they are working for me. Use "hcidump -X -V" and in case of your mailer
it is better you attach it.
> After this, trying 'hcitool info' on each querying the other just results in
> "Connection timed out".
Show the hcidump for this, too.
> I can't work out which end is at fault.
Check dmesg for any error messages.
> Machine A is running an unpatched 2.4.30, machine B 2.4.28. (2.4.29 had USB
> issues with my DVD burner.) Both are running bluez-libs and bluez-utils 2.17,
> and bluz-hcidump 1.21.
What about using a 2.6.12-rc5 kernel?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-05-30 11:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-29 16:40 [Bluez-users] BNEP session hangs, can't work out why Michael McConnell
2005-05-30 11:57 ` Marcel Holtmann [this message]
2005-06-01 18:06 ` Michael McConnell
2005-06-02 13:46 ` [Bluez-users] Bluez on Familiar 0.7.2 Bruno Campos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1117454226.7072.135.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.