From: "Ing. Raúl Alvarez Aguileta" <l0rd4gu1@icontrol.com.mx>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: doing a dd to a dbfile
Date: Wed, 01 Jun 2005 19:59:59 -0500 [thread overview]
Message-ID: <1117673999.28282.2.camel@localhost> (raw)
Hi
I've a corruption problem with one innodb file, when i'm trying to
recover a corrupted file (it's filled with no data at byte 524288+, but
it have valid info later [aprox 4mb ahead] ) with:
# dd if=/dev/zero of=ibdata1 bs=1 seek=524288 count=4194304 conv=notrunc
the command ends dumping the folllowing message:
output from /var/log/messages
---->
Jun 1 18:43:07 g4nd4lf Kernel BUG at file:534
Jun 1 18:43:07 g4nd4lf invalid operand: 0000 [1] SMP
Jun 1 18:43:07 g4nd4lf CPU 0
Jun 1 18:43:07 g4nd4lf Modules linked in: ipt_LOG ipt_state
iptable_filter ip_tables ip_conntrack_tftp ip_conntrack_irc
ip_conntrack_ftp ip_conntrack_amanda ip_conntrack amd74xx sd_mod aic79xx
mptctl mptscsih mptbase sata_sx4 sata_promise libata usb_storage
ide_core scsi_mod ohci_hcd uhci_hcd ehci_hcd usbcore
Jun 1 18:43:07 g4nd4lf Pid: 8993, comm: dd Not tainted 2.6.11-gentoo-r9
Jun 1 18:43:07 g4nd4lf RIP: 0010:[<ffffffff801a9372>]
<ffffffff801a9372>{reiserfs_file_write+5298}
Jun 1 18:43:07 g4nd4lf RSP: 0018:ffff81007c273ba8 EFLAGS: 00010246
Jun 1 18:43:08 g4nd4lf RAX: 0000000001000020 RBX: 0000000000000000 RCX:
0000000000000001
Jun 1 18:43:08 g4nd4lf RDX: ffff810002b04038 RSI: ffff81007c26e670 RDI:
ffff81007c273d98
Jun 1 18:43:08 g4nd4lf RBP: ffff81007e8bbdf0 R08: 0000000000000000 R09:
ffff810002c13c80
Jun 1 18:43:08 g4nd4lf R10: ffff81007fdd8ec0 R11: ffff81007e8bbdf0 R12:
0000000000000001
Jun 1 18:43:08 g4nd4lf R13: 0000000000000000 R14: ffff81007c26e670 R15:
ffff81007e8c0678
Jun 1 18:43:08 g4nd4lf FS: 00002aaaaade7b00(0000)
GS:ffffffff803ed880(0000) knlGS:0000000000000000
Jun 1 18:43:08 g4nd4lf CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
Jun 1 18:43:08 g4nd4lf CR2: 00002aaaaac4d3e0 CR3: 000000007c267000 CR4:
00000000000006e0
Jun 1 18:43:08 g4nd4lf Process dd (pid: 8993, threadinfo
ffff81007c272000, task ffff81007f6fa1b0)
Jun 1 18:43:08 g4nd4lf Stack: 0000000000000286 ffff81000000d680
0000000000000000 ffff81007c26e730
Jun 1 18:43:08 g4nd4lf 0000000100000000 000000000008cfff
00000000000080d2 0000000000000000
Jun 1 18:43:08 g4nd4lf 0000000000000000 0000000000000001
Jun 1 18:43:08 g4nd4lf Call Trace:<ffffffff80145f9e>{buffered_rmqueue
+654} <ffffffff801527ab>{do_no_page+939}
Jun 1 18:43:08 g4nd4lf <ffffffff8010de4d>{error_exit+0}
<ffffffff8018b88f>{inotify_inode_queue_event+47}
Jun 1 18:43:08 g4nd4lf <ffffffff801f1160>{read_zero+480}
<ffffffff80164669>{vfs_write+233}
Jun 1 18:43:08 g4nd4lf <ffffffff801647f3>{sys_write+83}
<ffffffff8010d44a>{system_call+126}
Jun 1 18:43:08 g4nd4lf
Jun 1 18:43:08 g4nd4lf
Jun 1 18:43:08 g4nd4lf Code: 0f 0b 8b f1 2d 80 ff ff ff ff 16 02 8b 02
4c 8b 42 10 f6 c4
Jun 1 18:43:08 g4nd4lf RIP <ffffffff801a9372>{reiserfs_file_write+5298}
RSP <ffff81007c273ba8>
<----
# sh /usr/src/linux/scripts/ver_linux
---->
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux g4nd4lf 2.6.11-gentoo-r9 #1 SMP Wed May 18 07:53:38 CDT 2005
x86_64 AMD Opteron(tm) Processor 250 AuthenticAMD GNU/Linux
Gnu C 3.4.3
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12i
mount 2.12i
module-init-tools 3.0
e2fsprogs 1.35
reiserfsprogs 3.6.19
reiser4progs line
Linux C Library 2.3.4
Dynamic linker (ldd) 2.3.4
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 045
Modules Loaded ipt_LOG ipt_state iptable_filter ip_tables
ip_conntrack_tftp ip_conntrack_irc ip_conntrack_ftp
ip_conntrack_amanda ip_conntrack amd74xx sd_mod aic79xx mptctl
mptscsih mptbase sata_sx4 sata_promise libata usb_storage ide_core
scsi_mod ohci_hcd uhci_hcd ehci_hcd usbcore
<----
# cat /proc/version
Linux version 2.6.11-gentoo-r9 (mailto:root@g4nd4lf) (gcc version 3.4.3
20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 SMP Wed May
1807:53:38 CDT 2005
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 250
stepping : 10
cpu MHz : 2392.943
cache size : 1024 KB
physical id : 255
siblings : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm
3dnowext 3dnow
bogomips : 4734.97
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 250
stepping : 10
cpu MHz : 2392.943
cache size : 1024 KB
physical id : 255
siblings : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm
3dnowext 3dnow
bogomips : 4784.12
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
# cat /proc/modules
ipt_state 2752 24 - Live 0xffffffff88156000
iptable_filter 4032 1 - Live 0xffffffff88154000
ip_tables 24640 3 ipt_LOG,ipt_state,iptable_filter, Live
0xffffffff8814c000
ip_conntrack_tftp 5552 0 - Live 0xffffffff88149000
ip_conntrack_irc 73520 0 - Live 0xffffffff88136000
ip_conntrack_ftp 74416 0 - Live 0xffffffff88122000
ip_conntrack_amanda 71520 0 - Live 0xffffffff8810f000
ip_conntrack 58428 5
ipt_state,ip_conntrack_tftp,ip_conntrack_irc,ip_conntrack_ftp,ip_conntrack_amanda,
Live 0xffffffff880ff000
amd74xx 14128 0 [permanent], Live 0xffffffff880fa000
sd_mod 18240 3 - Live 0xffffffff880f4000
aic79xx 194428 0 - Live 0xffffffff880c3000
mptctl 26656 0 - Live 0xffffffff880bb000
mptscsih 37876 0 - Live 0xffffffff880b0000
mptbase 44512 2 mptctl,mptscsih, Live 0xffffffff880a4000
sata_sx4 15300 0 - Live 0xffffffff8809f000
sata_promise 12676 0 - Live 0xffffffff8809a000
libata 50696 2 sata_sx4,sata_promise, Live 0xffffffff8808c000
usb_storage 72064 0 - Live 0xffffffff88079000
ide_core 143936 2 amd74xx,usb_storage, Live 0xffffffff88054000
scsi_mod 102480 7
sd_mod,aic79xx,mptscsih,sata_sx4,sata_promise,libata,usb_storage, Live
0xffffffff88039000
ohci_hcd 19464 0 - Live 0xffffffff88033000
uhci_hcd 32736 0 - Live 0xffffffff8802a000
ehci_hcd 32776 0 - Live 0xffffffff88020000
usbcore 126480 5 usb_storage,ohci_hcd,uhci_hcd,ehci_hcd, Live
0xffffffff88000000
# cat /proc/ioports
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
0376-0376 : ide1
03c0-03df : vesafb
03f8-03ff : serial
0cf8-0cff : PCI conf1
1020-102f : 0000:00:07.1
1020-1027 : ide0
1028-102f : ide1
2000-2fff : PCI Bus #01
2000-20ff : 0000:01:05.0
2400-240f : 0000:01:06.0
2410-2413 : 0000:01:06.0
2414-2417 : 0000:01:06.0
2418-241f : 0000:01:06.0
2420-2427 : 0000:01:06.0
3000-3fff : PCI Bus #02
3000-30ff : 0000:02:02.0
8000-8003 : PM1a_EVT_BLK
8004-8005 : PM1a_CNT_BLK
8008-800b : PM_TMR
8020-8023 : GPE0_BLK
80b0-80b7 : GPE1_BLK
# cat /proc/iomem
0009ac00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c97ff : Adapter ROM
000c9800-000cafff : Adapter ROM
000cb000-000cefff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7ff6ffff : System RAM
00100000-002cb3be : Kernel code
002cb3bf-003b011f : Kernel data
7ff70000-7ff7afff : ACPI Tables
7ff7b000-7ff7ffff : ACPI Non-volatile Storage
7ff80000-7fffffff : reserved
fc000000-fc000fff : 0000:00:0a.1
fc001000-fc001fff : 0000:00:0b.1
fc100000-fdffffff : PCI Bus #01
fc100000-fc100fff : 0000:01:00.0
fc100000-fc100fff : ohci_hcd
fc101000-fc101fff : 0000:01:00.1
fc101000-fc101fff : ohci_hcd
fc102000-fc102fff : 0000:01:05.0
fc103000-fc1031ff : 0000:01:06.0
fd000000-fdffffff : 0000:01:05.0
fd000000-fd7effff : vesafb
fe000000-fe0fffff : PCI Bus #02
fe000000-fe00ffff : 0000:02:01.0
fe000000-fe00ffff : tg3
fe010000-fe01ffff : 0000:02:01.0
fe010000-fe01ffff : tg3
fe020000-fe02ffff : 0000:02:01.1
fe020000-fe02ffff : tg3
fe030000-fe03ffff : 0000:02:01.1
fe030000-fe03ffff : tg3
fe040000-fe04ffff : 0000:02:02.0
fe050000-fe05ffff : 0000:02:02.0
fec00000-fec003ff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
# cat /proc/scsi/scsi
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: LSILOGIC Model: 1030 IM IM Rev: 1000
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 08 Lun: 00
Vendor: IBM Model: 25P3495a S320 1 Rev: 1
Type: Processor ANSI SCSI revision: 02
# lspci -vvv
0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI
(rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 115
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc100000-fdffffff
Prefetchable memory behind bridge: fff00000-000fffff
Expansion ROM at 00002000 [disabled] [size=4K]
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [c0] #08 [0086]
Capabilities: [f0] #08 [8000]
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev
05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE
(rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: IBM: Unknown device 7469
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1020 [size=16]
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
Subsystem: IBM: Unknown device 746b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X
Bridge (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fe000000-fe0fffff
Prefetchable memory behind bridge:
00000000fff00000-0000000000000000
Expansion ROM at 00003000 [disabled] [size=4K]
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] Capabilities: [b8] #08 [8000]
Capabilities: [c0] #08 [004a]
0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
(rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at fc000000 (64-bit, non-prefetchable)
0000:00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X
Bridge (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge:
00000000fff00000-0000000000000000
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] Capabilities: [b8] #08 [8000]
0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
(rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at fc001000 (64-bit, non-prefetchable)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB
(rev 0b) (prog-if 10 [OHCI])
Subsystem: IBM: Unknown device 7464
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc100000 (32-bit, non-prefetchable)
0000:01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB
(rev 0b) (prog-if 10 [OHCI])
Subsystem: IBM: Unknown device 7464
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc101000 (32-bit, non-prefetchable)
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Rage XL
(rev 27) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 0240
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 10
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable)
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at fc102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:06.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller
(rev 01)
Subsystem: IBM: Unknown device 3512
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 10
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 2420
Region 1: I/O ports at 2414 [size=4]
Region 2: I/O ports at 2418 [size=8]
Region 3: I/O ports at 2410 [size=4]
Region 4: I/O ports at 2400 [size=16]
Region 5: Memory at fc103000 (32-bit, non-prefetchable)
[size=512]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:02:01.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5704 Gigabit Ethernet (rev 03)
Subsystem: IBM: Unknown device 02a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fe010000 (64-bit, non-prefetchable)
Region 2: Memory at fe000000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: [40] Capabilities: [48] Power Management
version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: 02c0488909912014 Data: 6880
0000:02:01.1 Ethernet controller: Broadcom Corporation NetXtreme
BCM5704 Gigabit Ethernet (rev 03)
Subsystem: IBM: Unknown device 02a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin B routed to IRQ 25
Region 0: Memory at fe030000 (64-bit, non-prefetchable)
Region 2: Memory at fe020000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: [40] Capabilities: [48] Power Management
version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: 0980096b281c28a4 Data: 0000
0000:02:02.0 SCSI storage controller: LSI Logic / Symbios Logic
53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
Subsystem: IBM: Unknown device 026d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), cache line size 10
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 3000
Region 1: Memory at fe050000 (64-bit, non-prefetchable)
[size=64K]
Region 3: Memory at fe040000 (64-bit, non-prefetchable)
[size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=2 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
Thanks and Regards
--
Ing. Ral Alvarez Aguileta <l0rd4gu1@icontrol.com.mx>
Red de Control Corporativo
next reply other threads:[~2005-06-02 0:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-02 0:59 Ing. Raúl Alvarez Aguileta [this message]
2005-06-02 19:19 ` PROBLEM: doing a dd to a dbfile Jeff Mahoney
2005-06-03 3:16 ` Ing. Raúl Alvarez Aguileta
2005-06-03 5:15 ` Jeff Mahoney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1117673999.28282.2.camel@localhost \
--to=l0rd4gu1@icontrol.com.mx \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.