All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Vroon <chainsaw@gentoo.org>
To: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
	SCSI Mailing List <linux-scsi@vger.kernel.org>,
	Andy Whitcroft <apw@shadowen.org>
Subject: Re: aic7xxx regression occuring after 2.6.12 final
Date: Sat, 02 Jul 2005 21:04:54 +0100	[thread overview]
Message-ID: <1120334694.21898.3.camel@localhost> (raw)
In-Reply-To: <1120333574.5073.26.camel@mulgrave>

[-- Attachment #1: Type: text/plain, Size: 4369 bytes --]

On Sat, 2005-07-02 at 14:46 -0500, James Bottomley wrote:
> This should, therefore, get the whole lot booting again.
Confirmed. Thumbs up :)

For good measure, here is the relevant bit of dmesg output:
CPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level,
high) -> IRQ 17
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 29160 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

 target0:0:0: asynchronous.
  Vendor: FUJITSU   Model: MAP3367NP         Rev: 0106
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
 target0:0:0: Beginning Domain Validation
 target0:0:0: wide asynchronous.
 target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s ST (12.5 ns, offset 127)
 target0:0:0: Ending Domain Validation
(scsi0:A:1:0): refuses WIDE negotiation.  Using 8bit transfers
 target0:0:1: asynchronous.
  Vendor: YAMAHA    Model: CRW2100S          Rev: 1.0N
  Type:   CD-ROM                             ANSI SCSI revision: 02
 target0:0:1: Beginning Domain Validation
 target0:0:1: Domain Validation skipping write tests
 target0:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 7)
 target0:0:1: Ending Domain Validation
(scsi0:A:2:0): refuses WIDE negotiation.  Using 8bit transfers
 target0:0:2: asynchronous.
  Vendor: PIONEER   Model: DVD-ROM DVD-305   Rev: 1.03
  Type:   CD-ROM                             ANSI SCSI revision: 02
 target0:0:2: Beginning Domain Validation
 target0:0:2: Domain Validation skipping write tests
 target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
 target0:0:2: Ending Domain Validation
target0:0:3: asynchronous.
  Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 1.11
  Type:   CD-ROM                             ANSI SCSI revision: 02
 target0:0:3: Beginning Domain Validation
 target0:0:3: Domain Validation skipping write tests
 target0:0:3: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
 target0:0:3: Ending Domain Validation
 target0:0:5: asynchronous.
  Vendor: QUANTUM   Model: ATLAS10K3_36_SCA  Rev: 020W
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:5:0: Tagged Queuing enabled.  Depth 32
 target0:0:5: Beginning Domain Validation
 target0:0:5: wide asynchronous.
 target0:0:5: FAST-80 WIDE SCSI 160.0 MB/s ST (12.5 ns, offset 127)
 target0:0:5: Ending Domain Validation
scsi0:A:6:0: Tagged Queuing enabled.  Depth 32
 target0:0:6: Beginning Domain Validation
 target0:0:6: wide asynchronous.
 target0:0:6: FAST-80 WIDE SCSI 160.0 MB/s ST (12.5 ns, offset 63)
 target0:0:6: Ending Domain Validation
SCSI device sda: 71775284 512-byte hdwr sectors (36749 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 71775284 512-byte hdwr sectors (36749 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71833096 512-byte hdwr sectors (36779 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 71833096 512-byte hdwr sectors (36779 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 5, lun 0
ttached scsi disk sdb at scsi0, channel 0, id 5, lun 0
SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1
Attached scsi disk sdc at scsi0, channel 0, id 6, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
sr1: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0
sr2: scsi-1 drive
Attached scsi CD-ROM sr2 at scsi0, channel 0, id 3, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 5
Attached scsi generic sg2 at scsi0, channel 0, id 2, lun 0,  type 5
Attached scsi generic sg3 at scsi0, channel 0, id 3, lun 0,  type 5
Attached scsi generic sg4 at scsi0, channel 0, id 5, lun 0,  type 0
Attached scsi generic sg5 at scsi0, channel 0, id 6, lun 0,  type 0


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

      reply	other threads:[~2005-07-02 20:05 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-06-29 22:50 aic7xxx regression occuring after 2.6.12 final Tony Vroon
2005-07-02 15:42 ` Tony Vroon
2005-07-02 16:22   ` James Bottomley
2005-07-02 16:46     ` Tony Vroon
2005-07-02 17:01       ` James Bottomley
2005-07-02 17:13         ` Tony Vroon
2005-07-02 17:33           ` James Bottomley
2005-07-02 17:47             ` Tony Vroon
2005-07-02 18:36               ` James Bottomley
2005-07-02 19:03                 ` Tony Vroon
2005-07-02 19:15                   ` Tony Vroon
2005-07-02 19:46                   ` James Bottomley
2005-07-02 20:04                     ` Tony Vroon [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1120334694.21898.3.camel@localhost \
    --to=chainsaw@gentoo.org \
    --cc=James.Bottomley@SteelEye.com \
    --cc=apw@shadowen.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.