Re: [Bluez-devel] Suspend locks up usb

[Marcel Holtmann <marcel@holtmann.org>]

Hi Christian,

> i have a little problem with bluetooth on my Thinkpad 600e. Every time
> when suspending (apm -s) while the usb bluetooth dongle is still plugged
> in (that means: the modules are still loaded), usb is no longer
> operational after the wakeup. (Un)Plugging of the dongle or any other
> device is not recognized. As the module-use-count is not zero, i cannot
> unload the modules and try it again.
> Module                  Size  Used by
> hci_usb                12360  1
> bluetooth              41700  1 hci_usb
> bcm203x                 4772  0
> firmware_class          7520  1 bcm203x
> 
> The log states:
> Aug 21 14:48:53 alpha apmd[9065]: Suspending now
> Aug 21 14:49:16 alpha hub 1-0:1.0: resubmit --> -108
> Aug 21 14:49:16 alpha hub 1-0:1.0: hub_port_status failed (err = -108)
> 
> I have the newest bluez versions in use (Gentoo):
> bluez-hciemu-1.0
> bluez-firmware-1.0
> bluez-hcidump-1.21
> bluez-libs-2.19
> bluez-utils-2.19
> Linux version 2.6.12-mh2
> 
> The problem seems to be independend of the used dongle: I tried LevelOne
> MDU-0005USB and Broadcom WTB-3020.
> 
> Unloading the modules before suspend might help - i just try not to
> forget to unplug it before suspending ;-)

I can't tell you anything about the APM. Did you tried to use ACPI? What
kernel version is this?

However to unload you module you need to do a "hciconfig hci0 down"
first. This will deactivate the interface.

Regards

Marcel




-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel