From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Kofler Subject: Kernel panic, Domain 0 shutdown (was Aieee! CPU0 is toast...) Date: Thu, 1 Sep 2005 14:47:33 +0200 Message-ID: <1125578853.4316f8653a471@mail.devcon.cc> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org Hi, I upgraded to the latest FC4 rpms on this server and got the serial debug= to=20 work. We did "mv /lib/tls /lib/tls.disabled" but the tls message also=20 remained, which was not the case with older rpms. We hope for help, Thanks in advance, Thomas - kernel-xenU-2.6.12-1.1447_FC4, kernel-xen0-2.6.12-1.1447_FC4, xen-2-20050823 - SELinux is fully disabled - No X-Window system is installed HW-Configuration: IBM NetFinity 5500, Dual PIII-Xeon 600 MHz, 1.5GByte RAM, ServRAID RAID1,= =20 QLogic 2200 HBA on other hardware this xen version works fine. --> /etc/grub.conf title Fedora Core (2.6.12-1.1447_FC4smp) root (hd0,0) kernel /vmlinuz-2.6.12-1.1447_FC4smp ro root=3D/dev/VolGroup00/Lo= gVol00=20 console=3DttyS0,38400n8 initrd /initrd-2.6.12-1.1447_FC4smp.img title Fedora Core (2.6.12= - 1.1447_FC4xen0) root (hd0,0) kernel /xen.gz dom0_mem=3D131072 com1=3DttyS0,38400,8n1 module /vmlinuz-2.6.12-1.1447_FC4xen0 ro root=3D/dev/VolGroup00/L= ogVol00 module /initrd-2.6.12-1.1447_FC4xen0.img --> mounting /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw) /dev/proc on /proc ty= pe=20 proc (rw) /dev/sys on /sys type sysfs (rw) /dev/devpts on /dev/pts type d= evpts=20 (rw,gid=3D5,mode=3D620) /dev/sda1 on /boot type ext3 (rw) /dev/shm on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc=20 on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) automount(pid1666) on /misc type autofs (rw,fd=3D4,pgrp=3D1666,minproto=3D2,maxproto=3D4) automount(pid1712) on /net type autofs (rw,fd=3D4,pgrp=3D1712,minproto=3D2,maxproto=3D4) --> crash dump GNU GRUB version 0.95 (624K lower / 1571820K upper memory) +------------------------------------------------------------------------= -+| |||||||||||||||||||||||+------------------------------------------------ |||||||||||||||||||||||+---- ---------------------+ Use the ^ and v keys to select which entry is highlighted. Press 'b' to boot, 'e' to edit the selected command in the boot sequence, 'c' for a command-line, 'o' to open a new line after ('O' for before) the selected line, 'd' to remove the selected line, or escape to go back to the main menu. root (hd0,0)= =20 kernel /xen.gz dom0_mem=3D131072 com1=3D38400,8n1 module /vmlinuz-2.6.12- 1.1447_FC4xen0 ro root=3D/dev/VolGroup00/LogVol0> module /initrd-2.6.12- 1.1447_FC4xen0.img Booting command-list root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz dom0_mem=3D= 131072=20 com1=3D38400,8n1 [Multiboot-elf, <0x100000:0x6c1bc:0x27e44>, shtab=3D0x194078, entry=3D= 0x100000]=20 module /vmlinuz-2.6.12-1.1447_FC4xen0 ro root=3D/dev/VolGroup00/LogVol00 [Multiboot-module @ 0x195000, 0x33f794 bytes] module /initrd-2.6.12- 1.1447_FC4xen0.img [Multiboot-module @ 0x4d5000, 0x40e800 bytes] __ __ _____ ___ _ _=20 \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| =20 http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (bhcompile@build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) Tue Aug 23 14:57:59 EDT 2005 Latest ChangeSe= t: =20 (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009c000 (usable) (XEN) 000000000009c000 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000005fffb000 (usable) (XEN) 000000005fffb000 - 0000000060000000 (ACPI data) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000fffc0000 - 0000000100000000 (reserved) (XEN) System RAM: 1535MB (1572444kB) (XEN) Xen heap: 10MB (10620kB) (XEN) PAE disabled. (XEN) found SMP MP-table at 0009c1d0 (XEN) DMI 2.1 present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 IBM ) @ 0x000fdf= d0 (XEN) ACPI: RSDT (v001 IBM SERKQUAD 0x00001000 IBM 0x00000000) @ 0x5fffff80 (XEN) ACPI: FADT (v001 IBM SERKQUAD 0x00001000 IBM 0x00000000) @ 0x5fffff00 (XEN) ACPI: MADT (v001 IBM SERKQUAD 0x00001000 IBM 0x00000000) @ 0x5ffffe80 (XEN) ACPI: DSDT (v001 IBM SERKQUAD 0x00001000 MSFT 0x0100000b) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled) (XEN) Processor #3 6:7 APIC version 17 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 6:7 APIC version 17 (XEN) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) ACPI: NMI_SRC (dfl dfl global_irq 20) (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 547.584 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: L1 I cache: 16K, L1 D cache: 16K (XEN) CPU: L2 cache: 512K (XEN) CPU0: Intel Pentium III (Katmai) stepping 03 (XEN) Booting processor 1/0 eip 90000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 16K, L1 D cache: 16K (XEN) CPU: L2 cache: 512K (XEN) CPU1: Intel Pentium III (Katmai) stepping 03 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 2 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) mtrr: your CPUs had inconsistent fixed MTRR settings (XEN) mtrr: probably your BIOS does not setup all CPUs. (XEN) mtrr: corrected configuration. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=3Dlinux,GUEST_VER=3D2.6,XEN_VER=3D3.0,VIRT_BASE=3D0xC0000000,PA= E=3Dno,LOADER =3Dgeneric' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 5e000000->5f000000 (28672 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04aaa98 (XEN) Init. ramdisk: c04ab000->c08b9800 (XEN) Phys-Mach map: c08ba000->c08da000 (XEN) Page tables: c08da000->c08de000 (XEN) Start info: c08de000->c08df000 (XEN) Boot stack: c08df000->c08e0000 (XEN) TOTAL: c0000000->c0c00000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x40e800, start at 0xc04ab000 (XEN) Scrubbing Free RAM: ................done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input= to=20 Xen). Linux version 2.6.12-1.1447_FC4xen0 (bhcompile@decompose.build.redhat.com= ) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Fri Aug 26 21:13:28= EDT=20 2005 BIOS-provided physical RAM map: Xen: 0000000000100000 - 0000000008000000 (usable) 128MB LOWMEM available= . Using x86 segment limits to approximate NX protection DMI 2.1 present. IRQ lockup detection disabled Allocating PCI resources starting at 08000000 (gap: 08000000:f8000000) Bu= ilt 1=20 zonelists Kernel command line: ro root=3D/dev/VolGroup00/LogVol00 Initial= izing=20 CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Xen reported:= =20 547.568 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cac= he=20 hash table entries: 16384 (order: 4, 65536 bytes) vmalloc area: c8800000- fbeb4000, maxmem 34000000 Memory: 119296k/131072k available (2356k kernel code, 10596k reserved, 71= 5k=20 data, 208k init, 0k highmem) Checking if this processor honours the WP bi= t=20 even in supervisor mode... Ok. Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capab= ility=20 LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled CPU0: Intel Pentium III (Katmai) stepping 03 Booting processor 1/1 eip c0= 100010 GDT: copying 256 bytes from c0102000 to c08e0000 Initializing CPU#1 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activa= ted=20 (2185.62 BogoMIPS). Brought up 2 CPUs checking if image is initramfs... it is Freeing initrd memory: 4154k freed NET: Registered protocol family 16 PCI: Using configuration type 1 Linux Plug and Play Support v0.97 (c) Adam Belay xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Grant table initialized =20 *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls libraries. The emulation is very ** ** slow. To ensure full performance you should ** ** execute the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: udev (pid=3D37) ** *************************************************************** *************************************************************** =20 Pausing... 5<6>IA-32 Microcode Update Driver: v1.14-xen audit: initializing netlink socket (disabled) audit(1125504954.756:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks =08=08=08=08=08=08=08=08=08=08=08=08Pausing... 4=08=08=08=08=08=08=08=08=08= =08=08=08Pausing... 3=08=08=08=08=08=08=08=08=08=08=08=08Pausing... 2=08=08=08=08=08=08=08=08=08=08=08=08Pausing... 1=08=08=08=08=08=08=08=08= =08=08=08=08Continuing... Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 1C1942C715575330 - User ID: Red Hat, Inc. (Kernel Module GPG key) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:11.0 failed with error -22 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io=20 scheduler anticipatory registered io scheduler deadline registered io=20 scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 1638= 4K=20 size 1024 blocksize Xen virtual console successfully installed as ttyS0 E= vent- channel device installed. Initialising Xen netif backend Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx PIIX4: IDE controller at PCI slot 0000:00:13.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio hda: CRD-8400B, ATAPI CD/DVD-ROM drive hda: Disabling (U)DMA for CRD-8400B (blacklisted) ide0 at 0x1f0-0x1f7,0x3= f6 on=20 irq 14 hda: ATAPI 40X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: = 3.20=20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse on isa0060/serio1 IP: routing cache hash table of 512 buckets, 8Kbytes TCP established hash= =20 table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries:= 8192=20 (order: 4, 98304 bytes) TCP: Hash tables configured (established 8192 bind 8192) Initializing IPs= ec=20 netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 208k freed SCSI subsystem initialized ips=20 0000:00:03.0: Warning ! ! ! ServeRAID Version Mismatch ips 0000:00:03.0: = Bios=20 =3D 7.00.14, Firmware =3D 2.88.13, Device Driver =3D 7.10.18 ips 0000:00:03.0: These levels should match to avoid possible compatibili= ty=20 problems. scsi0 : IBM PCI ServeRAID 7.10.18 Build 731 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 QLogic Fibre Channel HBA Driver device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com=20 Kernel panic - not syncing: Attempted to kill init! [] panic+0x53/0x240 [] unmap_vma_list+0x1f/0x30 [] do_exit+0x386/0x410 [] do_munmap+0x113/0x150 [] do_group_exit+0x8a/0xe0 [] sys_munmap+0x5a/0x80 [] syscall_call+0x7/0xb smp_send_stop disable_local_APIC stop_this_cpu disable_local_APIC (XEN) Domain 0 shutdown: rebooting machine. --> full successful boot with FC 4 Booting 'Fedora Core (2.6.12-1.1447_FC4smp)' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.12-1.1447_FC4smp ro root=3D/dev/VolGroup00/LogVol00 console=3Dt tyS0,38400n8 [Linux-bzImage, setup=3D0x1e00, size=3D0x17ab83] initrd /initrd-2.6.12-1.1447_FC4smp.img [Linux-initrd @ 0x37e21000, 0x1cef49 bytes] Linux version 2.6.12-1.1447_FC4smp (bhcompile@decompose.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Fri Aug 26 20:57:13 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c000 (usable) BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fffb000 (usable) BIOS-e820: 000000005fffb000 - 0000000060000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 0009c1d0 Using x86 segment limits to approximate NX protection DMI 2.1 present. Using APIC driver default ACPI: BIOS age (2000) fails cutoff (2001), acpi=3Dforce is required to en= able ACPI ACPI: Disabling ACPI support Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: IBM ENSW Product ID: NF 5500 SMP APIC at: 0xFEE00000 Processor #3 6:7 APIC version 17 Processor #0 6:7 APIC version 17 I/O APIC #14 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000) Built 1 zonelists Kernel command line: ro root=3D/dev/VolGroup00/LogVol00 console=3DttyS0,3= 8400n8 Initializing CPU#0 CPU 0 irqstacks, hard=3Dc042d000 soft=3Dc040d000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 547.616 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1551792k/1572844k available (2087k kernel code, 19796k reserved, 775k data, 236k init, 655340k highmem) Checking if this processor honours the WP bit even in supervisor mode... = Ok. Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Katmai) stepping 03 Booting processor 1/0 eip 3000 CPU 1 irqstacks, hard=3Dc042e000 soft=3Dc040e000 Initializing CPU#1 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated (2170.88 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs checking if image is initramfs... it is Freeing initrd memory: 1851k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd4fc, last bus=3D5 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20050729 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered peer bus 01 PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 10 PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 9 PCI->APIC IRQ transform: 0000:00:13.2[D] -> IRQ 10 PCI->APIC IRQ transform: 0000:01:01.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:01:02.0[A] -> IRQ 9 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1125501496.030:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 1C1942C715575330 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:11.0 failed with error -22 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled =FFttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx PIIX4: IDE controller at PCI slot 0000:00:13.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio hda: CRD-8400B, ATAPI CD/DVD-ROM drive hda: Disabling (U)DMA for CRD-8400B (blacklisted) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 40X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 128Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 236k freed Red Hat nash version 4.2.15 starinput: AT Translated Set 2 keyboard on isa0060/serio0 ting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Loading scsi_mod.ko module logips2pp: Detected unknown logitech mouse model 1 SCSI subsystem initialized Loading sd_mod.ko module Loading ips.ko module input: PS/2 Logitech Mouse on isa0060/serio1 ips 0000:00:03.0: Warning ! ! ! ServeRAID Version Mismatch ips 0000:00:03.0: Bios =3D 7.00.14, Firmware =3D 2.88.13, Device Driver =3D 7.10.18=20 ips 0000:00:03.0: These levels should match to avoid possible compatibili= ty problems. ips 0000:01:02.0: Warning ! ! ! ServeRAID Version Mismatch ips 0000:01:02.0: Bios =3D 7.00.14, Firmware =3D 6.10.24, Device Driver =3D 7.10.18=20 ips 0000:01:02.0: These levels should match to avoid possible compatibili= ty problems. scsi0 : IBM PCI ServeRAID 7.10.18 Build 731 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 scsi1 : IBM PCI ServeRAID 7.10.18 Build 731 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 71094272 512-byte hdwr sectors (36400 MB) SCSI device sda: drive cache: write through SCSI device sda: 71094272 512-byte hdwr sectors (36400 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 Vendor: SDR Model: GEM200 Rev: 2 =20 Type: Processor ANSI SCSI revision: 02 Loading scsi_transport_fc.ko module Loading qla2xxx.ko module QLogic Fibre Channel HBA Driver Loading qla2200.ko module qla2200 0000:01:01.0: Found an ISP2200, irq 11, iobase 0xf881c000 qla2200 0000:01:01.0: Configuring PCI space... qla2200 0000:01:01.0: Configure NVRAM parameters... qla2200 0000:01:01.0: Verifying loaded RISC code... qla2200 0000:01:01.0: LIP reset occured (f8e1). qla2200 0000:01:01.0: Waiting for LIP to complete... qla2200 0000:01:01.0: LIP occured (f8e1). qla2200 0000:01:01.0: LOOP UP detected (1 Gbps). qla2200 0000:01:01.0: Topology - (Loop), Host Loop address 0x7d scsi2 : qla2xxx qla2200 0000:01:01.0:=20 QLogic Fibre Channel HBA Driver: 8.00.02b5-k QLogic QLA22xx -=20 ISP2200: PCI (33 MHz) @ 0000:01:01.0 hdma+, host#=3D2, fw=3D2.02.06 TP Loading dm-mod.k Vendor: o module IBM Model: 3526 Rev: 0401 Type: Direct-Access ANSI SCSI revision: 03 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Vendor: IBM Model: 3526 Rev: 0401 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdb: 1132462080 512-byte hdwr sectors (579821 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 1132462080 512-byte hdwr sectors (579821 MB) SCSI device sdb: drive cache: write back sdb: unknown partition table Attached scsi disk sdb at scsi2, channel 0, id 0, lun 5 Vendor: IBM Model: 3526 Rev: 0401 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdc: 318767104 512-byte hdwr sectors (163209 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 318767104 512-byte hdwr sectors (163209 MB) SCSI device sdc: drive cache: write back sdc: unknown partition table Attached scsi disk sdc at scsi2, channel 0, id 0, lun 6 Vendor: IBM Model: 3526 Rev: 0401 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdd: 283115520 512-byte hdwr sectors (144955 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 283115520 512-byte hdwr sectors (144955 MB) SCSI device sdd: drive cache: write back sdd: unknown partition table Attached scsi disk sdd at scsi2, channel 0, id 0, lun 7 Vendor: IBM Model: Universal Xport Rev: 0401 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sde: 40960 512-byte hdwr sectors (21 MB) SCSI device sde: drive cache: write through SCSI device sde: 40960 512-byte hdwr sectors (21 MB) SCSI device sde: drive cache: write through sde: unknown partition table Attached scsi disk sde at scsi2, channel 0, id 0, lun 31 Loading jbd.ko module Loading ext3.ko module Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Making device-mapper control node Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup02" using metadata type lvm2 Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 2 logical volume(s) in volume group "VolGroup00" now active Creating root device Mounting root filesystem kSwitching to new root journald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. unmounting old /proc unmounting old /sys SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks cfq: depth 4 reached, tagging now on INIT: version 2.85 booting Welcome to Fedora Core Press 'I' to enter interactive startup. Starting udev: [ OK ] Initializing hardware... storage network audio done[ OK ] Setting clock (utc): Wed Aug 31 17:18:26 CEST 2005 [ OK ] Setting hostname www5.devcon.cc: [ OK ] Setting up Logical Volume Management: 1 logical volume(s) in volume gro= up "VolGroup02" now active 2 logical volume(s) in volume group "VolGroup00" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00=20 /dev/VolGroup00/LogVol00: clean, 38636/8339520 files, 548642/8339456 bloc= ks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1=20 /boot: clean, 64/26104 files, 42797/104388 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Checking for new hardware [ OK ] Starting pcmcia: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting auditd: [ OK ] Starting RPC idmapd: [ OK ] Starting Bluetooth services:[ OK ][ OK ] Mounting other filesystems: [ OK ] Starting automount: [ OK ] Starting cups: [ OK ] Starting sshd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting system message bus: [ OK ] Starting HAL daemon: [ OK ] =20