From: david <gangchen@mobilesoft.com.cn>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] file transfer problem
Date: Mon, 12 Sep 2005 09:41:36 +0800 [thread overview]
Message-ID: <1126489296.2376.22.camel@localhost.localdomain> (raw)
hi,
I use bluez-utils-2.20 and run "hcidump -X -V" to see what happens. Then
I try to use Sony Ericssion phone to transfer a file to my bluetooth
device, but it fails. I get the following mssage,
/********* below is the msg **************/
HCI sniffer - Bluetooth packet analyzer ver 1.25
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:0E:07:62:86:6C class 0x520204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:0E:07:62:86:6C role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 40 bdaddr 00:0E:07:62:86:6C type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 40 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:0E:07:62:86:6C mode 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 40
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 40 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 40 ptype 0x0018
Packet type: DM1 DH1
> ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 40 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> ACL data: handle 40 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 251
< ACL data: handle 40 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> ACL data: handle 40 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 40 flags 0x02 dlen 17
> ACL data: handle 40 flags 0x01 dlen 17
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x0 len 0x19
pat uuid-16 0x1105 (OBEXObjPush)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList)
0x0009 (BTProfileDescList) 0x0100 (SrvName) 0x0303 (SuppFormatsList)
cont 00
< ACL data: handle 40 flags 0x02 dlen 184
L2CAP(d): cid 0x0040 len 180 [psm 1]
SDP SSA Rsp: tid 0x0 len 0xaf
count 172
record #0
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
aid 0x0100 (SrvName)
str "OBEX Object Push"
aid 0x0303 (SuppFormatsList)
< uint 0xff >
record #1
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
aid 0x0100 (SrvName)
str "OBEX Object Push"
aid 0x0303 (SuppFormatsList)
< uint 0xff >
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 40 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:0E:07:62:86:6C class 0x520204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:0E:07:62:86:6C role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 41 bdaddr 00:0E:07:62:86:6C type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 41 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:0E:07:62:86:6C mode 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 41
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 41 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 41 ptype 0x0018
Packet type: DM1 DH1
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 251
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 41 flags 0x02 dlen 17
> ACL data: handle 41 flags 0x01 dlen 11
L2CAP(d): cid 0x0040 len 24 [psm 1]
SDP SSA Req: tid 0x0 len 0x13
pat uuid-16 0x1105 (OBEXObjPush)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList)
0x0303 (SuppFormatsList)
cont 00
< ACL data: handle 41 flags 0x02 dlen 116
L2CAP(d): cid 0x0041 len 112 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x6b
count 104
record #0
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0303 (SuppFormatsList)
< uint 0xff>
record #1
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0303 (SuppFormatsList)
< uint 0xff>
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0042
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0042 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 251
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0042 flags 0x00 result 0 clen 0
Success
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0042 flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 17
> ACL data: handle 41 flags 0x01 dlen 1
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
Success
MTU 251
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0042 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 17
> ACL data: handle 41 flags 0x01 dlen 2
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 246 max_retrans 0 credits 7
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0042 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0042 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0042
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0042
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 41 reason 0x13
Reason: Remote User Terminated Connection
/*************************************/
>From: Marcel Holtmann <marcel@ho...>
> Re: file transfer problem
>2005-09-08 16:14
> Hi David,
> I meet a problem while doing file transfer using bluez-2.9.
> Some phone cannot find my services I register. I browse my sevice and
> get the following message:
>...
> So I compare my phone's service with others'.
> I find the only difference between them is that my Service RecHandle is different from others.
> My Service Rechandle is very big such as ox804fa00. Others are 0x10000, 0x10001...,and so on.
> Is there anything to do with Service RecHandle why other bluetooth devices cannot find my bluetooth services?
> I am expecting for you reply. Thanks very much.
did you tried to use bluez-utils-2.20? Run "hcidump -X -V" to see what
the phone is looking for.
Regards
Marcel
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next reply other threads:[~2005-09-12 1:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-12 1:41 david [this message]
2005-09-12 22:20 ` [Bluez-devel] file transfer problem Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2005-09-08 7:40 david
2005-09-08 23:14 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1126489296.2376.22.camel@localhost.localdomain \
--to=gangchen@mobilesoft.com.cn \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.