From: Marcel Holtmann <marcel@holtmann.org>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Re: class 1 bluetooth 1.2 dongles with CSR chipset?
Date: Wed, 05 Oct 2005 19:50:16 +0200 [thread overview]
Message-ID: <1128534616.5447.32.camel@localhost.localdomain> (raw)
In-Reply-To: <20051005152912.GA2686@intevation.de>
Hi Thomas,
> > try to get a Cellink BlueCore4 based dongle with EDR support.
>
> The two Cellink BTA6030 arrived today, here the output of
> hciconfig hci1 features version revision:
>
> hci1: Type: USB
> BD Address: 00:0A:94:xx:xx:xx ACL MTU: 384:8 SCO MTU: 64:8
> Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
> <3-slot packets> <5-slot packets> <encryption> <slot offset>
> <timing accuracy> <role switch> <hold mode> <sniff mode>
> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
> <power control> <transparent SCO> <broadcast encrypt>
> <EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan>
> <interlaced iscan> <interlaced pscan> <inquiry with RSSI>
> <extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave>
> <AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL>
> <AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps>
> <EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features>
> HCI Ver: 1.1 (0x1) HCI Rev: 0x5dc LMP Ver: 1.1 (0x1) LMP Subver: 0x5dc
> Manufacturer: Cambridge Silicon Radio (10)
> Build 1500
> Chip version: BlueCore4-External
> Max key size: 56 bit
> SCO mapping: HCI
>
> The version numbers look strange.
the version numbers can be corrected with the pskey tool. Check version
and remver PS keys.
> Unfortunately the dongles only support 56bit encryption.
You can flash a 128-bit firmware into it, but currently no such firmware
is not available in the public.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-10-05 17:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-30 12:41 [Bluez-users] class 1 bluetooth 1.2 dongles with CSR chipset? Thomas Arendsen Hein
2005-09-30 13:33 ` Marcel Holtmann
2005-09-30 16:59 ` [Bluez-users] " Thomas Arendsen Hein
2005-10-01 9:12 ` Marcel Holtmann
2005-10-05 15:29 ` Thomas Arendsen Hein
2005-10-05 17:50 ` Marcel Holtmann [this message]
2005-09-30 22:16 ` [Bluez-users] " Christian Schuglitsch
2005-10-13 21:24 ` Christian Schuglitsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1128534616.5447.32.camel@localhost.localdomain \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.