From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <001901c5cfe1$29a64180$6701a8c0@mainframe> References: <001901c5cfe1$29a64180$6701a8c0@mainframe> Content-Type: text/plain Message-Id: <1129201609.6951.1.camel@localhost.localdomain> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 13 Oct 2005 13:06:49 +0200 Hi Jonathan, > I have a digianswer protocol analyzer connected to my computer via > usb. > Problem is I can't seem to get it up running. > > hciconfig -a , produces the following > > hci0: Type: USB > BD Address: 00:00:00:00:00:00 ACL MTU: 0 :0 SCO MTU: 0:0 > DOWN > > hciconfig hci0 up > > Can't init device hci0: Commection timed out (110) > > I am currently slackware 2.6.11.8, with bluez-libs 2.21 installed. > > lsmod displays the following > > hci_usb 14344 0 > bluetooth 43268 1 hci_usb > > > I'm guessing it detects the device but I havent got the right driver > loaded? show me the content of /proc/bus/usb/devices and check if you have the bpa10x kernel driver. If not then you might need to install a newer kernel. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users