From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <000401c5cff4$d138d620$6701a8c0@mainframe> References: <001901c5cfe1$29a64180$6701a8c0@mainframe> <1129201609.6951.1.camel@localhost.localdomain> <000401c5cff4$d138d620$6701a8c0@mainframe> Content-Type: text/plain Message-Id: <1129210251.6308.0.camel@localhost.localdomain> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 13 Oct 2005 15:30:51 +0200 Hi Jonathan, > > show me the content of /proc/bus/usb/devices and check if you have the > > bpa10x kernel driver. If not then you might need to install a newer > > kernel. > > here we go, > > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=08fd ProdID=0001 Rev= 1.00 > C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=300mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > > Meanwhile, I'll go upgrade my kernel to 2.6.13 and get it patch. > I'll post the results in a bit. this won't help, I think. Is this the BPA-100 or the BPA-105? Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users