From: Ted Kaczmarek <tedkaz@optonline.net>
To: xen-devel@lists.xensource.com
Subject: domU panic changeset: 7369:92c6021f23e4
Date: Thu, 13 Oct 2005 14:06:20 -0400 [thread overview]
Message-ID: <1129226780.12282.35.camel@pluto.linsolutions.com> (raw)
FC4, tyan 2462 SMP, domU happens every time.
Using config file "/etc/xen/debian-1".
Started domain debian-1
Linux version 2.6.12-xenU (root@inyoureyes.linsolutions.com) (gcc
version 4.0.1 20050727 (Red Hat 4.0.1-5)) #4 SMP Thu Oct 13 11:57:39 EDT
2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008000000 (usable)
0MB HIGHMEM available.
128MB LOWMEM available.
IRQ lockup detection disabled
Built 1 zonelists
Kernel command line: ip=off:1.2.3.4::::eth0:off root=/dev/sda1 ro
selinux=0 3
Initializing CPU#0
CPU 0 irqstacks, hard=c03d7000 soft=c03cf000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 1592.897 MHz processor.
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
vmalloc area: c8800000-fb7fe000, maxmem 34000000
Memory: 125952k/131072k available (2045k kernel code, 4924k reserved,
635k data, 160k init, 0k hig hmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
CPU0: AMD Athlon(tm) Processor stepping 02
Enabling SMP...
Booting processor 1/1 eip c0100008
CPU 1 irqstacks, hard=c03d8000 soft=c03d0000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU1: AMD Athlon(tm) MP 1900+ stepping 02
Total of 2 processors activated (6363.54 BogoMIPS).
Brought up 2 CPUs
NET: Registered protocol family 16
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
Grant table initialized
Initializing Cryptographic API
i8042.c: No controller found.
io scheduler noop registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
WARNING: Failed to register Xen virtual console driver as 'tty1'
Event-channel device installed.
xen_blk: Initialising virtual block device driver
Registering block device major 8
xen_net: Initialising virtual ethernet driver.
register_blkdev: cannot get major 8 for sd
mice: PS/2 mouse device common for all mice
raid6: int32x1 620 MB/s
raid6: int32x2 677 MB/s
raid6: int32x4 560 MB/s
raid6: int32x8 429 MB/s
raid6: mmxx1 1219 MB/s
raid6: mmxx2 2119 MB/s
raid6: sse1x1 455 MB/s
raid6: sse1x2 903 MB/s
raid6: using algorithm sse1x2 (903 MB/s)
md: raid6 personality registered as nr 8
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 2227.600 MB/sec
raid5: using function: pIII_sse (2227.600 MB/sec)
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
IP-Config: Unable to guess netmask for address 238.0.0.0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
Warning: unable to open an initial console.
Unable to handle kernel NULL pointer dereference at virtual address
00000000
printing eip:
c023fea4
*pde = ma 00000000 pa 55555000
Oops: 0000 [#1]
SMP
Modules linked in:
CPU: 0
EIP: 0061:[<c023fea4>] Not tainted VLI
EFLAGS: 00010246 (2.6.12-xenU)
EIP is at visual_init+0x54/0x150
eax: 00000000 ebx: c052d000 ecx: 00000000 edx: 00000000
esi: c052d000 edi: 00000000 ebp: 00000000 esp: c0030e80
ds: 007b es: 007b ss: 0069
Process init (pid: 1, threadinfo=c0030000 task=c0031a20)
Stack: 00000000 c0537d84 00000000 c0232577 00000000 c052d000 c052d150
c024003f
c052d000 00000000 00000001 c03fa820 c0587000 00000000 00000000
00400000
c0243128 00000000 ffffffed c0582880 00000001 c0233367 c0587000
c0582880
Call Trace:
[<c0232577>] init_dev+0x2a7/0x5e0
[<c024003f>] vc_allocate+0x9f/0x150
[<c0243128>] con_open+0x48/0xb0
[<c0233367>] tty_open+0x117/0x300
[<c0233250>] tty_open+0x0/0x300
[<c016f537>] chrdev_open+0xb7/0x1a0
[<c0164534>] dentry_open+0xe4/0x230
[<c016443c>] filp_open+0x5c/0x70
[<c0164728>] get_unused_fd+0xa8/0xd0
[<c0164879>] sys_open+0x49/0x90
[<c0109989>] syscall_call+0x7/0xb
Code: 84 10 00 01 00 00 ff 08 83 3a 02 0f 84 ff 00 00 00 8b 15 ec ab 3f
c0 89 53 28 8b 04 bd 40 bd 3f c0 85 c0 74 03 89 43 28 8b 53 28 <8b> 32
85 f6 74 29 89 34 24 e8 de ca ef ff 85 c0 0f 84 9a 00 00
<0>Kernel panic - not syncing: Attempted to kill init!
Regards,
Ted
next reply other threads:[~2005-10-13 18:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-13 18:06 Ted Kaczmarek [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-10-13 18:23 domU panic changeset: 7369:92c6021f23e4 Ian Pratt
[not found] <E1EQ8N9-0006Jb-2o@host-192-168-0-1-bcn-london>
2005-10-13 19:41 ` Hien Nguyen
2005-10-13 19:58 ` Ted Kaczmarek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1129226780.12282.35.camel@pluto.linsolutions.com \
--to=tedkaz@optonline.net \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.