From: James Bottomley <James.Bottomley@SteelEye.com>
To: Linus Torvalds <torvalds@osdl.org>, Andrew Morton <akpm@osdl.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: [GIT PATCH] SCSI updates for 2.6.14
Date: Sat, 05 Nov 2005 10:18:11 -0600 [thread overview]
Message-ID: <1131207491.3614.5.camel@mulgrave> (raw)
This is Part I of the pending SCSI patches (I still need to go over all
the flood that came in after 2.6.14 was declared).
This patch is available from:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6.git
The short changelog is
Alan Stern:
o sd: Fix refcounting
Alex Aizman:
o open-iscsi/linux-iscsi-5 Initiator: Initiator code
o open-iscsi/linux-iscsi-5 Initiator: Kconfig update
o open-iscsi/linux-iscsi-5 Initiator: Transport class update for iSCSI
o open-iscsi/linux-iscsi-5 Initiator: Initiator header
o open-iscsi/linux-iscsi-5 Initiator: Header files
o open-iscsi/linux-iscsi-5 Initiator: Makefile Updates
Andrew Vasquez:
o Add an 'Issue LIP' device attribute in fc_transport class
o qla2xxx: fix compile warning
o qla2xxx: remove eh_active checks in qla2xxx error handling
o qla2xxx: Update license
o qla2xxx: Use midlayer's int_to_scsilun() function
o qla2xxx: Add support to dynamically enable/disable ZIO
o qla2xxx: Correct issue where fcport is prematurely marked DEAD
Christoph Hellwig:
o mptsas: white space fixes and version bump
o mptsas: add support for PHY resets
o sas: add support for PHY resets
o sas: add flag for locally attached PHYs
o mptsas: support link error attributes
o scsi_transport_sas: support link error attributes
Guennadi Liakhovetski:
o dc395x: atomic_kmap for PIO
Jack Hammer:
o ips: Fix initialization bug with kdump
o ips: Fix up for correct scatter/gather processing
James Bottomley:
o Fix ips.c compile
o Merge by Hand
o lpfc: Fix for "command completion for iotax x?? not found"
o remove broken driver cpqfc
o fix up mismerge in osst
o qla2xxx: put back label erroneously removed by eh_active patch
o qla2xxx: fix unnecessary activation of blk tag queue
o move the mid-layer printk's over to shost/starget/sdev_printk
o avoid overflows in disk size calculations
o qla2xxx: Resync with latest released ISP23xx/63xx firmware --
3.03.18
o Merge HEAD from ../scsi-misc-2.6-old
o aacraid: Use DMA mask defines
o move iscsi to a better place in Kconfig
o iscsi_tcp: make iscsi compile again after recent netlink changes
o Merge HEAD from ../scsi-iscsi-2.6
o Merge ../linux-2.6
o iscsi: fix 64 bit compile warning
James Smart:
o lpfc: Change version number to 8.1.0
o lpfc 8.1.0 : Add owner field to struct pci_driver
o lpfc: Fix eh_ return codes for commands
o lpfc: Remove unneeded IOCB_t * cast
o lpfc: Adjust lpfc_scsi_buf allocation
o lpfc: Replace lpfc_sli_issue_iocb_wait_high_priority
o lpfc: Remove RPI hash from the driver
o lpfc: Restore HEX safe bahavior of the sysfs xxx_store functions
o lpfc: Fix for "Unknown IOCB command Data: x0 x3 x0 x0"
o lpfc: Fix comments for nodev_tmo
o lpfc: Add range checking for attributes passed as options at load
time
o lpfc: Return -EINVAL, -EPERM, and -EIO instead of 0 from sysfs
callbacks
o lpfc: Update to Emulex hba model names
o lpfc: Cleanup code in lpfc_get_stats()
o update fc_transport for removal of block/unblock functions
Jayachandran C:
o sr: remove dead code
o Fix issue reported by coverity in drivers/scsi/scsi_ioctl.c
Jeff Garzik:
o use scmd_id(), scmd_channel() throughout code
o use sfoo_printk() in drivers
o use {sdev,scmd,starget,shost}_printk in generic code
o introduce sfoo_printk, sfoo_id, sfoo_channel helpers
o kill unused scsi_scan_single_target()
Mark Haverkamp:
o aacraid: Newer adapter communication iterface support
o aacraid: remove compiler warning
o aacraid: fix struct element cpu order
o aacraid: fix inquiry page
Matthew Wilcox:
o ncr53c8xx: Cleanup namespace collision with ktimers
Mike Christie:
o iscsi: add module version
o iscsi: fix nop-in handling
o iscsi: rename some proto defs
o iscsi: add newline to sysfs output
o iscsi: fix ahs len
o iscsi: update some iscsi proto defs
o iscsi: handle nonlinear skbs
o iscsi: preemt fix and cleanup
o iscsi: nodelay fix
Ralf Bächle:
o sgiwd93: small fixes
o dec_esp: Use the right address space macro
o dec_esp: Use physical addresses
o dec_esp: Fix mapping of ESP
And the diffstat (large qla firmware update again, I'm afraid):
b/Documentation/scsi/LICENSE.qla2xxx | 45
b/drivers/message/fusion/mptbase.h | 16
b/drivers/message/fusion/mptsas.c | 323
b/drivers/scsi/3w-9xxx.c | 4
b/drivers/scsi/3w-xxxx.c | 4
b/drivers/scsi/53c700.c | 89
b/drivers/scsi/53c700.h | 8
b/drivers/scsi/Kconfig | 39
b/drivers/scsi/Makefile | 4
b/drivers/scsi/NCR5380.c | 21
b/drivers/scsi/NCR53C9x.c | 16
b/drivers/scsi/NCR53c406a.c | 2
b/drivers/scsi/a100u2w.c | 2
b/drivers/scsi/aacraid/README | 2
b/drivers/scsi/aacraid/TODO | 1
b/drivers/scsi/aacraid/aachba.c | 86
b/drivers/scsi/aacraid/aacraid.h | 27
b/drivers/scsi/aacraid/commctrl.c | 6
b/drivers/scsi/aacraid/comminit.c | 25
b/drivers/scsi/aacraid/commsup.c | 86
b/drivers/scsi/aacraid/dpcsup.c | 115
b/drivers/scsi/aacraid/linit.c | 37
b/drivers/scsi/aacraid/rkt.c | 172
b/drivers/scsi/aacraid/rx.c | 157
b/drivers/scsi/aacraid/sa.c | 38
b/drivers/scsi/aha152x.c | 3
b/drivers/scsi/aha1542.c | 3
b/drivers/scsi/aha1740.c | 2
b/drivers/scsi/aic7xxx/aic79xx_osm.c | 39
b/drivers/scsi/aic7xxx/aic7xxx_osm.c | 32
b/drivers/scsi/atp870u.c | 29
b/drivers/scsi/ch.c | 4
b/drivers/scsi/constants.c | 5
b/drivers/scsi/dc395x.c | 13
b/drivers/scsi/dec_esp.c | 21
b/drivers/scsi/eata.c | 56
b/drivers/scsi/eata_pio.c | 21
b/drivers/scsi/fd_mcs.c | 4
b/drivers/scsi/fdomain.c | 4
b/drivers/scsi/hosts.c | 10
b/drivers/scsi/ibmmca.c | 5
b/drivers/scsi/ide-scsi.c | 2
b/drivers/scsi/imm.c | 2
b/drivers/scsi/in2000.c | 2
b/drivers/scsi/ipr.h | 5
b/drivers/scsi/ips.c | 153
b/drivers/scsi/iscsi_tcp.c | 3642 ++++++++
b/drivers/scsi/iscsi_tcp.h | 322
b/drivers/scsi/lpfc/lpfc.h | 4
b/drivers/scsi/lpfc/lpfc_attr.c | 201
b/drivers/scsi/lpfc/lpfc_crtn.h | 21
b/drivers/scsi/lpfc/lpfc_ct.c | 14
b/drivers/scsi/lpfc/lpfc_disc.h | 1
b/drivers/scsi/lpfc/lpfc_els.c | 36
b/drivers/scsi/lpfc/lpfc_hbadisc.c | 124
b/drivers/scsi/lpfc/lpfc_init.c | 69
b/drivers/scsi/lpfc/lpfc_mbox.c | 7
b/drivers/scsi/lpfc/lpfc_nportdisc.c | 21
b/drivers/scsi/lpfc/lpfc_scsi.c | 399
b/drivers/scsi/lpfc/lpfc_sli.c | 525 -
b/drivers/scsi/lpfc/lpfc_sli.h | 22
b/drivers/scsi/lpfc/lpfc_version.h | 2
b/drivers/scsi/megaraid/megaraid_sas.c | 5
b/drivers/scsi/ncr53c8xx.c | 30
b/drivers/scsi/nsp32.c | 8
b/drivers/scsi/osst.c | 6
b/drivers/scsi/pcmcia/nsp_cs.c | 10
b/drivers/scsi/pcmcia/sym53c500_cs.c | 2
b/drivers/scsi/ppa.c | 2
b/drivers/scsi/psi240i.c | 2
b/drivers/scsi/qla2xxx/ql2100.c | 9
b/drivers/scsi/qla2xxx/ql2100_fw.c | 22
b/drivers/scsi/qla2xxx/ql2200.c | 9
b/drivers/scsi/qla2xxx/ql2200_fw.c | 22
b/drivers/scsi/qla2xxx/ql2300.c | 9
b/drivers/scsi/qla2xxx/ql2300_fw.c |13851 +++++++++++++++----------------
b/drivers/scsi/qla2xxx/ql2322.c | 7
b/drivers/scsi/qla2xxx/ql2322_fw.c |14483 ++++++++++++++++-----------------
b/drivers/scsi/qla2xxx/ql6312.c | 7
b/drivers/scsi/qla2xxx/ql6312_fw.c |13882 +++++++++++++++----------------
b/drivers/scsi/qla2xxx/qla_attr.c | 111
b/drivers/scsi/qla2xxx/qla_dbg.c | 18
b/drivers/scsi/qla2xxx/qla_dbg.h | 23
b/drivers/scsi/qla2xxx/qla_def.h | 36
b/drivers/scsi/qla2xxx/qla_fw.h | 30
b/drivers/scsi/qla2xxx/qla_gbl.h | 31
b/drivers/scsi/qla2xxx/qla_gs.c | 18
b/drivers/scsi/qla2xxx/qla_init.c | 99
b/drivers/scsi/qla2xxx/qla_inline.h | 19
b/drivers/scsi/qla2xxx/qla_iocb.c | 63
b/drivers/scsi/qla2xxx/qla_isr.c | 25
b/drivers/scsi/qla2xxx/qla_mbx.c | 18
b/drivers/scsi/qla2xxx/qla_os.c | 112
b/drivers/scsi/qla2xxx/qla_rscn.c | 23
b/drivers/scsi/qla2xxx/qla_settings.h | 22
b/drivers/scsi/qla2xxx/qla_sup.c | 23
b/drivers/scsi/qla2xxx/qla_version.h | 22
b/drivers/scsi/qlogicfas408.c | 4
b/drivers/scsi/scsi.c | 26
b/drivers/scsi/scsi_debug.c | 17
b/drivers/scsi/scsi_error.c | 48
b/drivers/scsi/scsi_ioctl.c | 14
b/drivers/scsi/scsi_lib.c | 37
b/drivers/scsi/scsi_scan.c | 37
b/drivers/scsi/scsi_transport_fc.c | 476 -
b/drivers/scsi/scsi_transport_iscsi.c | 1394 ++-
b/drivers/scsi/scsi_transport_sas.c | 75
b/drivers/scsi/scsi_transport_spi.c | 24
b/drivers/scsi/sd.c | 114
b/drivers/scsi/sg.c | 14
b/drivers/scsi/sgiwd93.c | 5
b/drivers/scsi/sr.c | 17
b/drivers/scsi/st.c | 9
b/drivers/scsi/sym53c416.c | 2
b/drivers/scsi/sym53c8xx_defs.h | 13
b/drivers/scsi/tmscsim.c | 12
b/drivers/scsi/u14-34f.c | 47
b/include/scsi/iscsi_if.h | 245
b/include/scsi/iscsi_proto.h | 589 +
b/include/scsi/scsi_device.h | 22
b/include/scsi/scsi_host.h | 6
b/include/scsi/scsi_transport_fc.h | 33
b/include/scsi/scsi_transport_iscsi.h | 202
b/include/scsi/scsi_transport_sas.h | 27
drivers/scsi/cpqfcTS.h | 19
drivers/scsi/cpqfcTSchip.h | 238
drivers/scsi/cpqfcTScontrol.c | 2231 -----
drivers/scsi/cpqfcTSi2c.c | 493 -
drivers/scsi/cpqfcTSinit.c | 2096 ----
drivers/scsi/cpqfcTSioctl.h | 94
drivers/scsi/cpqfcTSstructs.h | 1530 ---
drivers/scsi/cpqfcTStrigger.c | 33
drivers/scsi/cpqfcTStrigger.h | 8
drivers/scsi/cpqfcTSworker.c | 6516 --------------
drivers/scsi/sgiwd93.h | 24
135 files changed, 29959 insertions(+), 37041 deletions(-)
James
next reply other threads:[~2005-11-05 16:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-05 16:18 James Bottomley [this message]
2005-11-05 17:44 ` [GIT PATCH] SCSI updates for 2.6.14 Linus Torvalds
2005-11-05 18:13 ` James Bottomley
2005-11-05 18:25 ` Jeff Garzik
2005-11-05 18:33 ` James Bottomley
2005-11-05 18:37 ` Jeff Garzik
[not found] ` <Pine.LNX.4.64.0511051031250.3316@g5.osdl.org>
[not found] ` <1131216913.3614.15.camel@mulgrave>
2005-11-05 19:32 ` Linus Torvalds
2005-11-08 23:35 ` Dave C Boutcher
2005-11-09 5:09 ` Christoph Hellwig
2005-11-09 15:07 ` Dave C Boutcher
2005-11-09 18:30 ` Mike Christie
2005-11-09 18:35 ` Mike Christie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1131207491.3614.5.camel@mulgrave \
--to=james.bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.