From: Kasper Sandberg <lkml@metanurb.dk>
To: LKML Mailinglist <linux-kernel@vger.kernel.org>
Subject: [PATCH] cleanup module metadata declerations
Date: Thu, 10 Nov 2005 21:42:46 +0100 [thread overview]
Message-ID: <1131655366.2185.5.camel@localhost> (raw)
[-- Attachment #1: Type: text/plain, Size: 4742 bytes --]
Hello.. i noticed that it looks different, but the vast majority of the
declerations had no whitespace, so i created this patch to make the rest
look like what the majority does..
ef452bf0a84b3d4f2aca8a4e10c6f194 Cleanup_module_metadata.patch
i dont know if this is nessecary:
Signed-off-by: Kasper Sandberg
-----
diffstat:
arch/arm/mach-integrator/cpu.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/gx-suspmod.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/longhaul.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/longrun.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/powernow-k6.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/powernow-k7.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/speedstep-ich.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/speedstep-lib.c | 6 +++---
arch/i386/kernel/cpu/cpufreq/speedstep-smi.c | 6 +++---
crypto/twofish.c | 2 +-
drivers/cpufreq/cpufreq_conservative.c | 6 +++---
drivers/cpufreq/cpufreq_ondemand.c | 6 +++---
drivers/cpufreq/cpufreq_stats.c | 6 +++---
drivers/cpufreq/cpufreq_userspace.c | 6 +++---
drivers/cpufreq/freq_table.c | 6 +++---
drivers/hwmon/adm1021.c | 2 +-
drivers/i2c/busses/i2c-ali15x3.c | 2 +-
drivers/i2c/busses/i2c-amd8111.c | 2 +-
drivers/i2c/busses/i2c-frodo.c | 6 +++---
drivers/i2c/busses/i2c-i801.c | 2 +-
drivers/i2c/busses/i2c-ixp2000.c | 2 +-
drivers/i2c/busses/i2c-nforce2.c | 2 +-
drivers/input/keyboard/lkkbd.c | 14 +++++++-------
drivers/input/mouse/vsxxxaa.c | 6 +++---
drivers/mtd/maps/sbc8240.c | 6 +++---
drivers/mtd/nand/nand_base.c | 6 +++---
drivers/mtd/nand/nand_ids.c | 6 +++---
drivers/mtd/nand/nandsim.c | 6 +++---
drivers/net/8139cp.c | 4 ++--
drivers/net/8139too.c | 12 ++++++------
drivers/net/amd8111e.c | 2 +-
drivers/net/dl2k.c | 4 ++--
drivers/net/mii.c | 4 ++--
drivers/net/pci-skeleton.c | 10 +++++-----
drivers/net/tulip/de2104x.c | 4 ++--
drivers/net/znet.c | 2 +-
drivers/pci/hotplug/ibmphp_core.c | 6 +++---
drivers/pcmcia/yenta_socket.c | 2 +-
drivers/s390/char/vmlogrdr.c | 2 +-
drivers/s390/net/netiucv.c | 2 +-
drivers/s390/net/smsgiucv.c | 2 +-
drivers/scsi/3w-9xxx.c | 4 ++--
drivers/scsi/megaraid.c | 6 +++---
drivers/serial/serial_lh7a40x.c | 6 +++---
drivers/serial/v850e_uart.c | 6 +++---
drivers/usb/core/devio.c | 2 +-
drivers/usb/core/hub.c | 2 +-
drivers/usb/gadget/dummy_hcd.c | 6 +++---
drivers/usb/gadget/ether.c | 6 +++---
drivers/usb/gadget/inode.c | 6 +++---
drivers/usb/gadget/net2280.c | 6 +++---
drivers/usb/gadget/omap_udc.c | 4 ++--
drivers/usb/gadget/pxa2xx_udc.c | 4 ++--
drivers/usb/gadget/rndis.c | 2 +-
drivers/usb/gadget/zero.c | 4 ++--
drivers/usb/host/ehci-hcd.c | 10 +++++-----
drivers/usb/host/ohci-hcd.c | 10 +++++-----
drivers/usb/media/dabusb.c | 2 +-
drivers/usb/media/ibmcam.c | 4 ++--
drivers/usb/media/stv680.c | 10 +++++-----
drivers/usb/misc/auerswald.c | 6 +++---
drivers/usb/misc/usbtest.c | 14 +++++++-------
drivers/usb/net/pegasus.c | 2 +-
drivers/usb/net/usbnet.c | 2 +-
drivers/usb/serial/safe_serial.c | 4 ++--
sound/oss/wavfront.c | 2 +-
68 files changed, 173 insertions(+), 173 deletions(-)
[-- Attachment #2: Cleanup_module_metadata.patch --]
[-- Type: text/x-patch, Size: 49699 bytes --]
diff -Naur linux-2.6.14-a/arch/arm/mach-integrator/cpu.c linux-2.6.14-b/arch/arm/mach-integrator/cpu.c
--- linux-2.6.14-a/arch/arm/mach-integrator/cpu.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/arm/mach-integrator/cpu.c 2005-11-10 21:32:34.134517160 +0100
@@ -213,9 +213,9 @@
cpufreq_unregister_driver(&integrator_driver);
}
-MODULE_AUTHOR ("Russell M. King");
-MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Russell M. King");
+MODULE_DESCRIPTION("cpufreq driver for ARM Integrator CPUs");
+MODULE_LICENSE("GPL");
module_init(integrator_cpu_init);
module_exit(integrator_cpu_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c 2005-11-10 21:32:34.497461984 +0100
@@ -493,9 +493,9 @@
kfree(gx_params);
}
-MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
-MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE("GPL");
module_init(cpufreq_gx_init);
module_exit(cpufreq_gx_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/longhaul.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/longhaul.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/longhaul.c 2005-11-10 21:16:22.225269824 +0100
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/longhaul.c 2005-11-10 21:32:34.489463200 +0100
@@ -691,9 +691,9 @@
module_param (dont_scale_voltage, int, 0644);
MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
-MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
-MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE("GPL");
module_init(longhaul_init);
module_exit(longhaul_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/longrun.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/longrun.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/longrun.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/longrun.c 2005-11-10 21:32:34.496462136 +0100
@@ -318,9 +318,9 @@
}
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and Efficeon processors.");
+MODULE_LICENSE("GPL");
module_init(longrun_init);
module_exit(longrun_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c 2005-11-10 21:32:34.495462288 +0100
@@ -329,9 +329,9 @@
}
-MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
-MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE("GPL");
late_initcall(cpufreq_p4_init);
module_exit(cpufreq_p4_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c 2005-11-10 21:32:34.494462440 +0100
@@ -248,9 +248,9 @@
}
-MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE("GPL");
module_init(powernow_k6_init);
module_exit(powernow_k6_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c 2005-11-10 21:32:34.494462440 +0100
@@ -684,9 +684,9 @@
module_param(acpi_force, int, 0444);
MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
-MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
-MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE("GPL");
late_initcall(powernow_init);
module_exit(powernow_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2005-11-10 21:16:22.227269520 +0100
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2005-11-10 21:32:34.484463960 +0100
@@ -713,9 +713,9 @@
cpufreq_unregister_driver(¢rino_driver);
}
-MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
-MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Jeremy Fitzhardinge <jeremy@goop.org>");
+MODULE_DESCRIPTION("Enhanced SpeedStep driver for Intel Pentium M processors.");
+MODULE_LICENSE("GPL");
late_initcall(centrino_init);
module_exit(centrino_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c 2005-11-10 21:32:34.492462744 +0100
@@ -416,9 +416,9 @@
}
-MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
+MODULE_LICENSE("GPL");
module_init(speedstep_init);
module_exit(speedstep_exit);
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c 2005-11-10 21:32:34.491462896 +0100
@@ -380,6 +380,6 @@
MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability.");
#endif
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
--- linux-2.6.14-a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c 2005-11-10 21:16:22.228269368 +0100
+++ linux-2.6.14-b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c 2005-11-10 21:32:34.483464112 +0100
@@ -419,9 +419,9 @@
MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82");
MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface.");
-MODULE_AUTHOR ("Hiroshi Miura");
-MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura");
+MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE("GPL");
module_init(speedstep_init);
module_exit(speedstep_exit);
diff -Naur linux-2.6.14-a/crypto/twofish.c linux-2.6.14-b/crypto/twofish.c
--- linux-2.6.14-a/crypto/twofish.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/crypto/twofish.c 2005-11-10 21:32:36.016231096 +0100
@@ -899,4 +899,4 @@
module_exit(fini);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION ("Twofish Cipher Algorithm");
+MODULE_DESCRIPTION("Twofish Cipher Algorithm");
diff -Naur linux-2.6.14-a/drivers/cpufreq/cpufreq_conservative.c linux-2.6.14-b/drivers/cpufreq/cpufreq_conservative.c
--- linux-2.6.14-a/drivers/cpufreq/cpufreq_conservative.c 2005-11-10 21:16:23.480079064 +0100
+++ linux-2.6.14-b/drivers/cpufreq/cpufreq_conservative.c 2005-11-10 21:32:37.074070280 +0100
@@ -576,11 +576,11 @@
}
-MODULE_AUTHOR ("Alexander Clouter <alex-kernel@digriz.org.uk>");
-MODULE_DESCRIPTION ("'cpufreq_conservative' - A dynamic cpufreq governor for "
+MODULE_AUTHOR("Alexander Clouter <alex-kernel@digriz.org.uk>");
+MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for "
"Low Latency Frequency Transition capable processors "
"optimised for use in a battery environment");
-MODULE_LICENSE ("GPL");
+MODULE_LICENSE("GPL");
module_init(cpufreq_gov_dbs_init);
module_exit(cpufreq_gov_dbs_exit);
diff -Naur linux-2.6.14-a/drivers/cpufreq/cpufreq_ondemand.c linux-2.6.14-b/drivers/cpufreq/cpufreq_ondemand.c
--- linux-2.6.14-a/drivers/cpufreq/cpufreq_ondemand.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/cpufreq/cpufreq_ondemand.c 2005-11-10 21:32:37.080069368 +0100
@@ -484,10 +484,10 @@
}
-MODULE_AUTHOR ("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>");
-MODULE_DESCRIPTION ("'cpufreq_ondemand' - A dynamic cpufreq governor for "
+MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>");
+MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for "
"Low Latency Frequency Transition capable processors");
-MODULE_LICENSE ("GPL");
+MODULE_LICENSE("GPL");
module_init(cpufreq_gov_dbs_init);
module_exit(cpufreq_gov_dbs_exit);
diff -Naur linux-2.6.14-a/drivers/cpufreq/cpufreq_stats.c linux-2.6.14-b/drivers/cpufreq/cpufreq_stats.c
--- linux-2.6.14-a/drivers/cpufreq/cpufreq_stats.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/cpufreq/cpufreq_stats.c 2005-11-10 21:32:37.079069520 +0100
@@ -339,9 +339,9 @@
cpufreq_stats_free_table(cpu);
}
-MODULE_AUTHOR ("Zou Nan hai <nanhai.zou@intel.com>");
-MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats through sysfs filesystem");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Zou Nan hai <nanhai.zou@intel.com>");
+MODULE_DESCRIPTION("'cpufreq_stats' - A driver to export cpufreq stats through sysfs filesystem");
+MODULE_LICENSE("GPL");
module_init(cpufreq_stats_init);
module_exit(cpufreq_stats_exit);
diff -Naur linux-2.6.14-a/drivers/cpufreq/cpufreq_userspace.c linux-2.6.14-b/drivers/cpufreq/cpufreq_userspace.c
--- linux-2.6.14-a/drivers/cpufreq/cpufreq_userspace.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/cpufreq/cpufreq_userspace.c 2005-11-10 21:32:37.078069672 +0100
@@ -199,9 +199,9 @@
}
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>, Russell King <rmk@arm.linux.org.uk>");
-MODULE_DESCRIPTION ("CPUfreq policy governor 'userspace'");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>, Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'");
+MODULE_LICENSE("GPL");
fs_initcall(cpufreq_gov_userspace_init);
module_exit(cpufreq_gov_userspace_exit);
diff -Naur linux-2.6.14-a/drivers/cpufreq/freq_table.c linux-2.6.14-b/drivers/cpufreq/freq_table.c
--- linux-2.6.14-a/drivers/cpufreq/freq_table.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/cpufreq/freq_table.c 2005-11-10 21:32:37.077069824 +0100
@@ -220,6 +220,6 @@
}
EXPORT_SYMBOL_GPL(cpufreq_frequency_get_table);
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("CPUfreq frequency table helpers");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("CPUfreq frequency table helpers");
+MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/drivers/hwmon/adm1021.c linux-2.6.14-b/drivers/hwmon/adm1021.c
--- linux-2.6.14-a/drivers/hwmon/adm1021.c 2005-11-10 21:16:23.486078152 +0100
+++ linux-2.6.14-b/drivers/hwmon/adm1021.c 2005-11-10 21:32:37.160057208 +0100
@@ -391,7 +391,7 @@
i2c_del_driver(&adm1021_driver);
}
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and "
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
"Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("adm1021 driver");
MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/drivers/i2c/busses/i2c-ali15x3.c linux-2.6.14-b/drivers/i2c/busses/i2c-ali15x3.c
--- linux-2.6.14-a/drivers/i2c/busses/i2c-ali15x3.c 2005-11-10 21:16:23.532071160 +0100
+++ linux-2.6.14-b/drivers/i2c/busses/i2c-ali15x3.c 2005-11-10 21:32:37.195051888 +0100
@@ -519,7 +519,7 @@
pci_unregister_driver(&ali15x3_driver);
}
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
"Philip Edelbrock <phil@netroedge.com>, "
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("ALI15X3 SMBus driver");
diff -Naur linux-2.6.14-a/drivers/i2c/busses/i2c-amd8111.c linux-2.6.14-b/drivers/i2c/busses/i2c-amd8111.c
--- linux-2.6.14-a/drivers/i2c/busses/i2c-amd8111.c 2005-11-10 21:16:23.533071008 +0100
+++ linux-2.6.14-b/drivers/i2c/busses/i2c-amd8111.c 2005-11-10 21:32:37.192052344 +0100
@@ -20,7 +20,7 @@
#include <asm/io.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("AMD8111 SMBus 2.0 driver");
struct amd_smbus {
diff -Naur linux-2.6.14-a/drivers/i2c/busses/i2c-frodo.c linux-2.6.14-b/drivers/i2c/busses/i2c-frodo.c
--- linux-2.6.14-a/drivers/i2c/busses/i2c-frodo.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/i2c/busses/i2c-frodo.c 2005-11-10 21:32:37.204050520 +0100
@@ -76,9 +76,9 @@
i2c_bit_del_bus(&frodo_ops);
}
-MODULE_AUTHOR ("Abraham van der Merwe <abraham@2d3d.co.za>");
-MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Abraham van der Merwe <abraham@2d3d.co.za>");
+MODULE_DESCRIPTION("I2C-Bus adapter routines for Frodo");
+MODULE_LICENSE("GPL");
module_init (i2c_frodo_init);
module_exit (i2c_frodo_exit);
diff -Naur linux-2.6.14-a/drivers/i2c/busses/i2c-i801.c linux-2.6.14-b/drivers/i2c/busses/i2c-i801.c
--- linux-2.6.14-a/drivers/i2c/busses/i2c-i801.c 2005-11-10 21:16:23.535070704 +0100
+++ linux-2.6.14-b/drivers/i2c/busses/i2c-i801.c 2005-11-10 21:32:37.191052496 +0100
@@ -602,7 +602,7 @@
pci_unregister_driver(&i801_driver);
}
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
"Philip Edelbrock <phil@netroedge.com>, "
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("I801 SMBus driver");
diff -Naur linux-2.6.14-a/drivers/i2c/busses/i2c-ixp2000.c linux-2.6.14-b/drivers/i2c/busses/i2c-ixp2000.c
--- linux-2.6.14-a/drivers/i2c/busses/i2c-ixp2000.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/i2c/busses/i2c-ixp2000.c 2005-11-10 21:32:37.202050824 +0100
@@ -161,7 +161,7 @@
module_init(ixp2000_i2c_init);
module_exit(ixp2000_i2c_exit);
-MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>");
+MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver");
MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/drivers/i2c/busses/i2c-nforce2.c linux-2.6.14-b/drivers/i2c/busses/i2c-nforce2.c
--- linux-2.6.14-a/drivers/i2c/busses/i2c-nforce2.c 2005-11-10 21:16:23.540069944 +0100
+++ linux-2.6.14-b/drivers/i2c/busses/i2c-nforce2.c 2005-11-10 21:32:37.182053864 +0100
@@ -49,7 +49,7 @@
#include <asm/io.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
+MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@arcor.de>");
MODULE_DESCRIPTION("nForce2 SMBus driver");
diff -Naur linux-2.6.14-a/drivers/input/keyboard/lkkbd.c linux-2.6.14-b/drivers/input/keyboard/lkkbd.c
--- linux-2.6.14-a/drivers/input/keyboard/lkkbd.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/input/keyboard/lkkbd.c 2005-11-10 21:32:37.497005984 +0100
@@ -78,9 +78,9 @@
#define DRIVER_DESC "LK keyboard driver"
-MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
/*
* Known parameters:
@@ -92,19 +92,19 @@
*/
static int bell_volume = 100; /* % */
module_param (bell_volume, int, 0);
-MODULE_PARM_DESC (bell_volume, "Bell volume (in %). default is 100%");
+MODULE_PARM_DESC(bell_volume, "Bell volume (in %). default is 100%");
static int keyclick_volume = 100; /* % */
module_param (keyclick_volume, int, 0);
-MODULE_PARM_DESC (keyclick_volume, "Keyclick volume (in %), default is 100%");
+MODULE_PARM_DESC(keyclick_volume, "Keyclick volume (in %), default is 100%");
static int ctrlclick_volume = 100; /* % */
module_param (ctrlclick_volume, int, 0);
-MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
+MODULE_PARM_DESC(ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
static int lk201_compose_is_alt = 0;
module_param (lk201_compose_is_alt, int, 0);
-MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
+MODULE_PARM_DESC(lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
"will act as an Alt key");
diff -Naur linux-2.6.14-a/drivers/input/mouse/vsxxxaa.c linux-2.6.14-b/drivers/input/mouse/vsxxxaa.c
--- linux-2.6.14-a/drivers/input/mouse/vsxxxaa.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/input/mouse/vsxxxaa.c 2005-11-10 21:32:37.510004008 +0100
@@ -87,9 +87,9 @@
#define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet"
-MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
#undef VSXXXAA_DEBUG
#ifdef VSXXXAA_DEBUG
diff -Naur linux-2.6.14-a/drivers/mtd/maps/sbc8240.c linux-2.6.14-b/drivers/mtd/maps/sbc8240.c
--- linux-2.6.14-a/drivers/mtd/maps/sbc8240.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/mtd/maps/sbc8240.c 2005-11-10 21:32:38.420865536 +0100
@@ -241,7 +241,7 @@
module_init (init_sbc8240_mtd);
module_exit (cleanup_sbc8240_mtd);
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>");
-MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Carolyn Smith <carolyn.smith@tektronix.com>");
+MODULE_DESCRIPTION("MTD map driver for SBC8240 boards");
diff -Naur linux-2.6.14-a/drivers/mtd/nand/nand_base.c linux-2.6.14-b/drivers/mtd/nand/nand_base.c
--- linux-2.6.14-a/drivers/mtd/nand/nand_base.c 2005-11-10 21:16:23.942008840 +0100
+++ linux-2.6.14-b/drivers/mtd/nand/nand_base.c 2005-11-10 21:32:38.451860824 +0100
@@ -2690,6 +2690,6 @@
EXPORT_SYMBOL_GPL (nand_scan);
EXPORT_SYMBOL_GPL (nand_release);
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION ("Generic NAND flash driver code");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Generic NAND flash driver code");
diff -Naur linux-2.6.14-a/drivers/mtd/nand/nand_ids.c linux-2.6.14-b/drivers/mtd/nand/nand_ids.c
--- linux-2.6.14-a/drivers/mtd/nand/nand_ids.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/mtd/nand/nand_ids.c 2005-11-10 21:32:38.458859760 +0100
@@ -132,6 +132,6 @@
EXPORT_SYMBOL (nand_manuf_ids);
EXPORT_SYMBOL (nand_flash_ids);
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION ("Nand device & manufacturer ID's");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Nand device & manufacturer ID's");
diff -Naur linux-2.6.14-a/drivers/mtd/nand/nandsim.c linux-2.6.14-b/drivers/mtd/nand/nandsim.c
--- linux-2.6.14-a/drivers/mtd/nand/nandsim.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/mtd/nand/nandsim.c 2005-11-10 21:32:38.458859760 +0100
@@ -1590,7 +1590,7 @@
module_exit(ns_cleanup_module);
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Artem B. Bityuckiy");
-MODULE_DESCRIPTION ("The NAND flash simulator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Artem B. Bityuckiy");
+MODULE_DESCRIPTION("The NAND flash simulator");
diff -Naur linux-2.6.14-a/drivers/net/8139cp.c linux-2.6.14-b/drivers/net/8139cp.c
--- linux-2.6.14-a/drivers/net/8139cp.c 2005-11-10 21:16:23.947008080 +0100
+++ linux-2.6.14-b/drivers/net/8139cp.c 2005-11-10 21:32:38.677826472 +0100
@@ -98,13 +98,13 @@
static int debug = -1;
module_param(debug, int, 0);
-MODULE_PARM_DESC (debug, "8139cp: bitmapped message enable number");
+MODULE_PARM_DESC(debug, "8139cp: bitmapped message enable number");
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
static int multicast_filter_limit = 32;
module_param(multicast_filter_limit, int, 0);
-MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses");
#define PFX DRV_NAME ": "
diff -Naur linux-2.6.14-a/drivers/net/8139too.c linux-2.6.14-b/drivers/net/8139too.c
--- linux-2.6.14-a/drivers/net/8139too.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/net/8139too.c 2005-11-10 21:32:38.993778440 +0100
@@ -600,8 +600,8 @@
unsigned long fifo_copy_timeout;
};
-MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("RealTek RTL-8139 Fast Ethernet driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
@@ -609,10 +609,10 @@
module_param_array(media, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
module_param(debug, int, 0);
-MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
-MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
-MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
-MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+MODULE_PARM_DESC(debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC(multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC(full_duplex, "8139too: Force full duplex for board(s) (1)");
static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
static int rtl8139_open (struct net_device *dev);
diff -Naur linux-2.6.14-a/drivers/net/amd8111e.c linux-2.6.14-b/drivers/net/amd8111e.c
--- linux-2.6.14-a/drivers/net/amd8111e.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/net/amd8111e.c 2005-11-10 21:32:38.974781328 +0100
@@ -104,7 +104,7 @@
#define MODULE_NAME "amd8111e"
#define MODULE_VERS "3.0.5"
MODULE_AUTHOR("Advanced Micro Devices, Inc.");
-MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version 3.0.3");
+MODULE_DESCRIPTION("AMD8111 based 10/100 Ethernet Controller. Driver Version 3.0.3");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
module_param_array(speed_duplex, int, NULL, 0);
diff -Naur linux-2.6.14-a/drivers/net/dl2k.c linux-2.6.14-b/drivers/net/dl2k.c
--- linux-2.6.14-a/drivers/net/dl2k.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/net/dl2k.c 2005-11-10 21:32:38.906791664 +0100
@@ -69,8 +69,8 @@
static int tx_coalesce=16; /* HW xmit count each TxDMAComplete */
-MODULE_AUTHOR ("Edward Peng");
-MODULE_DESCRIPTION ("D-Link DL2000-based Gigabit Ethernet Adapter");
+MODULE_AUTHOR("Edward Peng");
+MODULE_DESCRIPTION("D-Link DL2000-based Gigabit Ethernet Adapter");
MODULE_LICENSE("GPL");
module_param_array(mtu, int, NULL, 0);
module_param_array(media, charp, NULL, 0);
diff -Naur linux-2.6.14-a/drivers/net/mii.c linux-2.6.14-b/drivers/net/mii.c
--- linux-2.6.14-a/drivers/net/mii.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/net/mii.c 2005-11-10 21:32:38.825803976 +0100
@@ -384,8 +384,8 @@
return rc;
}
-MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION ("MII hardware support library");
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("MII hardware support library");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(mii_link_ok);
diff -Naur linux-2.6.14-a/drivers/net/pci-skeleton.c linux-2.6.14-b/drivers/net/pci-skeleton.c
--- linux-2.6.14-a/drivers/net/pci-skeleton.c 2005-11-10 21:16:24.066989840 +0100
+++ linux-2.6.14-b/drivers/net/pci-skeleton.c 2005-11-10 21:32:38.575841976 +0100
@@ -483,15 +483,15 @@
chip_t chipset;
};
-MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver");
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver");
MODULE_LICENSE("GPL");
module_param(multicast_filter_limit, int, 0);
module_param(max_interrupt_work, int, 0);
module_param_array(media, int, NULL, 0);
-MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
-MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
-MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
+MODULE_PARM_DESC(multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
+MODULE_PARM_DESC(media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
static int read_eeprom (void *ioaddr, int location, int addr_len);
static int netdrv_open (struct net_device *dev);
diff -Naur linux-2.6.14-a/drivers/net/tulip/de2104x.c linux-2.6.14-b/drivers/net/tulip/de2104x.c
--- linux-2.6.14-a/drivers/net/tulip/de2104x.c 2005-11-10 21:16:24.144977984 +0100
+++ linux-2.6.14-b/drivers/net/tulip/de2104x.c 2005-11-10 21:32:39.429712168 +0100
@@ -60,7 +60,7 @@
static int debug = -1;
module_param (debug, int, 0);
-MODULE_PARM_DESC (debug, "de2104x bitmapped message enable number");
+MODULE_PARM_DESC(debug, "de2104x bitmapped message enable number");
/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
@@ -71,7 +71,7 @@
static int rx_copybreak = 100;
#endif
module_param (rx_copybreak, int, 0);
-MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copied");
+MODULE_PARM_DESC(rx_copybreak, "de2104x Breakpoint at which Rx packets are copied");
#define PFX DRV_NAME ": "
diff -Naur linux-2.6.14-a/drivers/net/znet.c linux-2.6.14-b/drivers/net/znet.c
--- linux-2.6.14-a/drivers/net/znet.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/net/znet.c 2005-11-10 21:32:38.688824800 +0100
@@ -114,7 +114,7 @@
#endif
static unsigned int znet_debug = ZNET_DEBUG;
module_param (znet_debug, int, 0);
-MODULE_PARM_DESC (znet_debug, "ZNet debug level");
+MODULE_PARM_DESC(znet_debug, "ZNet debug level");
MODULE_LICENSE("GPL");
/* The DMA modes we need aren't in <dma.h>. */
diff -Naur linux-2.6.14-a/drivers/pci/hotplug/ibmphp_core.c linux-2.6.14-b/drivers/pci/hotplug/ibmphp_core.c
--- linux-2.6.14-a/drivers/pci/hotplug/ibmphp_core.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/pci/hotplug/ibmphp_core.c 2005-11-10 21:32:39.923637080 +0100
@@ -52,9 +52,9 @@
static int debug;
module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC (debug, "Debugging mode enabled or not");
-MODULE_LICENSE ("GPL");
-MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
struct pci_bus *ibmphp_pci_bus;
static int max_slots;
diff -Naur linux-2.6.14-a/drivers/pcmcia/yenta_socket.c linux-2.6.14-b/drivers/pcmcia/yenta_socket.c
--- linux-2.6.14-a/drivers/pcmcia/yenta_socket.c 2005-11-10 21:16:24.325950472 +0100
+++ linux-2.6.14-b/drivers/pcmcia/yenta_socket.c 2005-11-10 21:32:39.954632368 +0100
@@ -54,7 +54,7 @@
static unsigned int override_bios;
module_param(override_bios, uint, 0000);
-MODULE_PARM_DESC (override_bios, "yenta ignore bios resource allocation");
+MODULE_PARM_DESC(override_bios, "yenta ignore bios resource allocation");
/*
* Generate easy-to-use ways of reading a cardbus sockets
diff -Naur linux-2.6.14-a/drivers/s390/char/vmlogrdr.c linux-2.6.14-b/drivers/s390/char/vmlogrdr.c
--- linux-2.6.14-a/drivers/s390/char/vmlogrdr.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/s390/char/vmlogrdr.c 2005-11-10 21:32:40.053617320 +0100
@@ -32,7 +32,7 @@
MODULE_AUTHOR
("(C) 2004 IBM Corporation by Xenia Tkatschow (xenia@us.ibm.com)\n"
" Stefan Weinhuber (wein@de.ibm.com)");
-MODULE_DESCRIPTION ("Character device driver for reading z/VM "
+MODULE_DESCRIPTION("Character device driver for reading z/VM "
"system service records.");
MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/drivers/s390/net/netiucv.c linux-2.6.14-b/drivers/s390/net/netiucv.c
--- linux-2.6.14-a/drivers/s390/net/netiucv.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/s390/net/netiucv.c 2005-11-10 21:32:40.172599232 +0100
@@ -66,7 +66,7 @@
MODULE_AUTHOR
("(C) 2001 IBM Corporation by Fritz Elfert (felfert@millenux.com)");
-MODULE_DESCRIPTION ("Linux for S/390 IUCV network driver");
+MODULE_DESCRIPTION("Linux for S/390 IUCV network driver");
\f
#define PRINTK_HEADER " iucv: " /* for debugging */
diff -Naur linux-2.6.14-a/drivers/s390/net/smsgiucv.c linux-2.6.14-b/drivers/s390/net/smsgiucv.c
--- linux-2.6.14-a/drivers/s390/net/smsgiucv.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/s390/net/smsgiucv.c 2005-11-10 21:32:40.165600296 +0100
@@ -37,7 +37,7 @@
MODULE_AUTHOR
("(C) 2003 IBM Corporation by Martin Schwidefsky (schwidefsky@de.ibm.com)");
-MODULE_DESCRIPTION ("Linux for S/390 IUCV special message driver");
+MODULE_DESCRIPTION("Linux for S/390 IUCV special message driver");
static iucv_handle_t smsg_handle;
static unsigned short smsg_pathid;
diff -Naur linux-2.6.14-a/drivers/scsi/3w-9xxx.c linux-2.6.14-b/drivers/scsi/3w-9xxx.c
--- linux-2.6.14-a/drivers/scsi/3w-9xxx.c 2005-11-10 21:16:24.394939984 +0100
+++ linux-2.6.14-b/drivers/scsi/3w-9xxx.c 2005-11-10 21:32:40.486551504 +0100
@@ -90,8 +90,8 @@
extern struct timezone sys_tz;
/* Module parameters */
-MODULE_AUTHOR ("AMCC");
-MODULE_DESCRIPTION ("3ware 9000 Storage Controller Linux Driver");
+MODULE_AUTHOR("AMCC");
+MODULE_DESCRIPTION("3ware 9000 Storage Controller Linux Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(TW_DRIVER_VERSION);
diff -Naur linux-2.6.14-a/drivers/scsi/megaraid.c linux-2.6.14-b/drivers/scsi/megaraid.c
--- linux-2.6.14-a/drivers/scsi/megaraid.c 2005-11-10 21:16:24.508922656 +0100
+++ linux-2.6.14-b/drivers/scsi/megaraid.c 2005-11-10 21:32:40.358570960 +0100
@@ -53,9 +53,9 @@
#define MEGARAID_MODULE_VERSION "2.00.3"
-MODULE_AUTHOR ("LSI Logic Corporation");
-MODULE_DESCRIPTION ("LSI Logic MegaRAID driver");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("LSI Logic Corporation");
+MODULE_DESCRIPTION("LSI Logic MegaRAID driver");
+MODULE_LICENSE("GPL");
MODULE_VERSION(MEGARAID_MODULE_VERSION);
static unsigned int max_cmd_per_lun = DEF_CMD_PER_LUN;
diff -Naur linux-2.6.14-a/drivers/serial/serial_lh7a40x.c linux-2.6.14-b/drivers/serial/serial_lh7a40x.c
--- linux-2.6.14-a/drivers/serial/serial_lh7a40x.c 2005-11-10 21:16:24.623905176 +0100
+++ linux-2.6.14-b/drivers/serial/serial_lh7a40x.c 2005-11-10 21:32:41.191444344 +0100
@@ -694,6 +694,6 @@
module_init (lh7a40xuart_init);
module_exit (lh7a40xuart_exit);
-MODULE_AUTHOR ("Marc Singer");
-MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Marc Singer");
+MODULE_DESCRIPTION("Sharp LH7A40X serial port driver");
+MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/drivers/serial/v850e_uart.c linux-2.6.14-b/drivers/serial/v850e_uart.c
--- linux-2.6.14-a/drivers/serial/v850e_uart.c 2005-11-10 21:16:24.631903960 +0100
+++ linux-2.6.14-b/drivers/serial/v850e_uart.c 2005-11-10 21:32:41.170447536 +0100
@@ -544,6 +544,6 @@
module_init (v850e_uart_init);
module_exit (v850e_uart_exit);
-MODULE_AUTHOR ("Miles Bader");
-MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Miles Bader");
+MODULE_DESCRIPTION("NEC " V850E_UART_CHIP_NAME " on-chip UART");
+MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/drivers/usb/core/devio.c linux-2.6.14-b/drivers/usb/core/devio.c
--- linux-2.6.14-a/drivers/usb/core/devio.c 2005-11-10 21:16:24.646901680 +0100
+++ linux-2.6.14-b/drivers/usb/core/devio.c 2005-11-10 21:32:41.371416984 +0100
@@ -71,7 +71,7 @@
static int usbfs_snoop = 0;
module_param (usbfs_snoop, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC (usbfs_snoop, "true to log all usbfs traffic");
+MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
#define snoop(dev, format, arg...) \
do { \
diff -Naur linux-2.6.14-a/drivers/usb/core/hub.c linux-2.6.14-b/drivers/usb/core/hub.c
--- linux-2.6.14-a/drivers/usb/core/hub.c 2005-11-10 21:16:24.651900920 +0100
+++ linux-2.6.14-b/drivers/usb/core/hub.c 2005-11-10 21:32:41.364418048 +0100
@@ -53,7 +53,7 @@
/* cycle leds on hubs that aren't blinking for attention */
static int blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
-MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
+MODULE_PARM_DESC(blinkenlights, "true to cycle leds on hubs");
/*
* As of 2.6.10 we introduce a new USB device initialization scheme which
diff -Naur linux-2.6.14-a/drivers/usb/gadget/dummy_hcd.c linux-2.6.14-b/drivers/usb/gadget/dummy_hcd.c
--- linux-2.6.14-a/drivers/usb/gadget/dummy_hcd.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/usb/gadget/dummy_hcd.c 2005-11-10 21:32:41.437406952 +0100
@@ -72,9 +72,9 @@
static const char gadget_name [] = "dummy_udc";
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
/*-------------------------------------------------------------------------*/
diff -Naur linux-2.6.14-a/drivers/usb/gadget/ether.c linux-2.6.14-b/drivers/usb/gadget/ether.c
--- linux-2.6.14-a/drivers/usb/gadget/ether.c 2005-11-10 21:16:24.658899856 +0100
+++ linux-2.6.14-b/drivers/usb/gadget/ether.c 2005-11-10 21:32:41.406411664 +0100
@@ -2539,9 +2539,9 @@
},
};
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_AUTHOR ("David Brownell, Benedikt Spanger");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell, Benedikt Spanger");
+MODULE_LICENSE("GPL");
static int __init init (void)
diff -Naur linux-2.6.14-a/drivers/usb/gadget/inode.c linux-2.6.14-b/drivers/usb/gadget/inode.c
--- linux-2.6.14-a/drivers/usb/gadget/inode.c 2005-11-10 21:16:24.663899096 +0100
+++ linux-2.6.14-b/drivers/usb/gadget/inode.c 2005-11-10 21:32:41.393413640 +0100
@@ -76,9 +76,9 @@
static const char driver_desc [] = DRIVER_DESC;
static const char shortname [] = "gadgetfs";
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
/*----------------------------------------------------------------------*/
diff -Naur linux-2.6.14-a/drivers/usb/gadget/net2280.c linux-2.6.14-b/drivers/usb/gadget/net2280.c
--- linux-2.6.14-a/drivers/usb/gadget/net2280.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/usb/gadget/net2280.c 2005-11-10 21:32:41.423409080 +0100
@@ -2955,9 +2955,9 @@
/* FIXME add power management support */
};
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
static int __init init (void)
{
diff -Naur linux-2.6.14-a/drivers/usb/gadget/omap_udc.c linux-2.6.14-b/drivers/usb/gadget/omap_udc.c
--- linux-2.6.14-a/drivers/usb/gadget/omap_udc.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/usb/gadget/omap_udc.c 2005-11-10 21:32:41.416410144 +0100
@@ -100,7 +100,7 @@
* boot parameter "omap_udc:fifo_mode=42"
*/
module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint setup (0 == default)");
+MODULE_PARM_DESC(fifo_mode, "endpoint setup (0 == default)");
#ifdef USE_DMA
static unsigned use_dma = 1;
@@ -109,7 +109,7 @@
* boot parameter "omap_udc:use_dma=y"
*/
module_param (use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "enable/disable DMA");
+MODULE_PARM_DESC(use_dma, "enable/disable DMA");
#else /* !USE_DMA */
/* save a bit of code */
diff -Naur linux-2.6.14-a/drivers/usb/gadget/pxa2xx_udc.c linux-2.6.14-b/drivers/usb/gadget/pxa2xx_udc.c
--- linux-2.6.14-a/drivers/usb/gadget/pxa2xx_udc.c 2005-11-10 21:16:24.664898944 +0100
+++ linux-2.6.14-b/drivers/usb/gadget/pxa2xx_udc.c 2005-11-10 21:32:41.388414400 +0100
@@ -108,7 +108,7 @@
#ifdef USE_DMA
static int use_dma = 1;
module_param(use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "true to use dma");
+MODULE_PARM_DESC(use_dma, "true to use dma");
static void dma_nodesc_handler (int dmach, void *_ep, struct pt_regs *r);
static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req);
@@ -138,7 +138,7 @@
*/
static ushort fifo_mode = 0;
module_param(fifo_mode, ushort, 0);
-MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode");
+MODULE_PARM_DESC(fifo_mode, "pxa2xx udc fifo mode");
#endif
/* ---------------------------------------------------------------------------
diff -Naur linux-2.6.14-a/drivers/usb/gadget/rndis.c linux-2.6.14-b/drivers/usb/gadget/rndis.c
--- linux-2.6.14-a/drivers/usb/gadget/rndis.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/usb/gadget/rndis.c 2005-11-10 21:32:41.410411056 +0100
@@ -62,7 +62,7 @@
static int rndis_debug = 0;
module_param (rndis_debug, int, 0);
-MODULE_PARM_DESC (rndis_debug, "enable debugging");
+MODULE_PARM_DESC(rndis_debug, "enable debugging");
#else
diff -Naur linux-2.6.14-a/drivers/usb/gadget/zero.c linux-2.6.14-b/drivers/usb/gadget/zero.c
--- linux-2.6.14-a/drivers/usb/gadget/zero.c 2005-11-10 21:16:24.668898336 +0100
+++ linux-2.6.14-b/drivers/usb/gadget/zero.c 2005-11-10 21:32:41.378415920 +0100
@@ -1308,8 +1308,8 @@
},
};
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("Dual BSD/GPL");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("Dual BSD/GPL");
static int __init init (void)
diff -Naur linux-2.6.14-a/drivers/usb/host/ehci-hcd.c linux-2.6.14-b/drivers/usb/host/ehci-hcd.c
--- linux-2.6.14-a/drivers/usb/host/ehci-hcd.c 2005-11-10 21:16:24.669898184 +0100
+++ linux-2.6.14-b/drivers/usb/host/ehci-hcd.c 2005-11-10 21:32:41.479400568 +0100
@@ -127,12 +127,12 @@
/* Initial IRQ latency: faster than hw default */
static int log2_irq_thresh = 0; // 0 to 6
module_param (log2_irq_thresh, int, S_IRUGO);
-MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+MODULE_PARM_DESC(log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
/* initial park setting: slower than hw default */
static unsigned park = 0;
module_param (park, uint, S_IRUGO);
-MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
+MODULE_PARM_DESC(park, "park setting; 1-3 back-to-back async packets");
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
@@ -1251,9 +1251,9 @@
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
-MODULE_DESCRIPTION (DRIVER_INFO);
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
static int __init init (void)
{
diff -Naur linux-2.6.14-a/drivers/usb/host/ohci-hcd.c linux-2.6.14-b/drivers/usb/host/ohci-hcd.c
--- linux-2.6.14-a/drivers/usb/host/ohci-hcd.c 2005-11-10 21:16:24.679896664 +0100
+++ linux-2.6.14-b/drivers/usb/host/ohci-hcd.c 2005-11-10 21:32:41.454404368 +0100
@@ -163,13 +163,13 @@
/* Some boards misreport power switching/overcurrent */
static int distrust_firmware = 1;
module_param (distrust_firmware, bool, 0);
-MODULE_PARM_DESC (distrust_firmware,
+MODULE_PARM_DESC(distrust_firmware,
"true to distrust firmware power/overcurrent setup");
/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
static int no_handshake = 0;
module_param (no_handshake, bool, 0);
-MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
+MODULE_PARM_DESC(no_handshake, "true (not default) disables BIOS handshake");
/*-------------------------------------------------------------------------*/
@@ -877,9 +877,9 @@
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_INFO);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_LICENSE("GPL");
#ifdef CONFIG_PCI
#include "ohci-pci.c"
diff -Naur linux-2.6.14-a/drivers/usb/media/dabusb.c linux-2.6.14-b/drivers/usb/media/dabusb.c
--- linux-2.6.14-a/drivers/usb/media/dabusb.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/usb/media/dabusb.c 2005-11-10 21:32:41.579385368 +0100
@@ -868,7 +868,7 @@
MODULE_LICENSE("GPL");
module_param(buffers, int, 0);
-MODULE_PARM_DESC (buffers, "Number of buffers (default=256)");
+MODULE_PARM_DESC(buffers, "Number of buffers (default=256)");
module_init (dabusb_init);
module_exit (dabusb_cleanup);
diff -Naur linux-2.6.14-a/drivers/usb/media/ibmcam.c linux-2.6.14-b/drivers/usb/media/ibmcam.c
--- linux-2.6.14-a/drivers/usb/media/ibmcam.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/usb/media/ibmcam.c 2005-11-10 21:32:41.576385824 +0100
@@ -158,8 +158,8 @@
module_param(init_model3_input, int, 0);
MODULE_PARM_DESC(init_model3_input, "Model3 input: 0=CCD 1=RCA");
-MODULE_AUTHOR ("Dmitri");
-MODULE_DESCRIPTION ("IBM/Xirlink C-it USB Camera Driver for Linux (c) 2000");
+MODULE_AUTHOR("Dmitri");
+MODULE_DESCRIPTION("IBM/Xirlink C-it USB Camera Driver for Linux (c) 2000");
MODULE_LICENSE("GPL");
/* Still mysterious i2c commands */
diff -Naur linux-2.6.14-a/drivers/usb/media/stv680.c linux-2.6.14-b/drivers/usb/media/stv680.c
--- linux-2.6.14-a/drivers/usb/media/stv680.c 2005-11-10 21:16:24.704892864 +0100
+++ linux-2.6.14-b/drivers/usb/media/stv680.c 2005-11-10 21:32:41.535392056 +0100
@@ -90,13 +90,13 @@
#define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>"
#define DRIVER_DESC "STV0680 USB Camera Driver"
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC (debug, "Debug enabled or not");
+MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(swapRGB_on, int, 0);
-MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never");
+MODULE_PARM_DESC(swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never");
module_param(video_nr, int, 0);
/********************************************************************
diff -Naur linux-2.6.14-a/drivers/usb/misc/auerswald.c linux-2.6.14-b/drivers/usb/misc/auerswald.c
--- linux-2.6.14-a/drivers/usb/misc/auerswald.c 2005-11-10 21:16:24.708892256 +0100
+++ linux-2.6.14-b/drivers/usb/misc/auerswald.c 2005-11-10 21:32:41.601382024 +0100
@@ -2145,9 +2145,9 @@
/* --------------------------------------------------------------------- */
/* Linux device driver module description */
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
module_init (auerswald_init);
module_exit (auerswald_cleanup);
diff -Naur linux-2.6.14-a/drivers/usb/misc/usbtest.c linux-2.6.14-b/drivers/usb/misc/usbtest.c
--- linux-2.6.14-a/drivers/usb/misc/usbtest.c 2005-11-10 21:16:24.721890280 +0100
+++ linux-2.6.14-b/drivers/usb/misc/usbtest.c 2005-11-10 21:32:41.595382936 +0100
@@ -239,7 +239,7 @@
static unsigned pattern = 0;
module_param (pattern, uint, S_IRUGO);
-// MODULE_PARM_DESC (pattern, "i/o pattern (0 == zeroes)");
+// MODULE_PARM_DESC(pattern, "i/o pattern (0 == zeroes)");
static inline void simple_fill_buf (struct urb *urb)
{
@@ -461,7 +461,7 @@
static unsigned realworld = 1;
module_param (realworld, uint, 0);
-MODULE_PARM_DESC (realworld, "clear to demand stricter spec compliance");
+MODULE_PARM_DESC(realworld, "clear to demand stricter spec compliance");
static int get_altsetting (struct usbtest_dev *dev)
{
@@ -1833,16 +1833,16 @@
static unsigned force_interrupt = 0;
module_param (force_interrupt, uint, 0);
-MODULE_PARM_DESC (force_interrupt, "0 = test default; else interrupt");
+MODULE_PARM_DESC(force_interrupt, "0 = test default; else interrupt");
#ifdef GENERIC
static unsigned short vendor;
module_param(vendor, ushort, 0);
-MODULE_PARM_DESC (vendor, "vendor code (from usb-if)");
+MODULE_PARM_DESC(vendor, "vendor code (from usb-if)");
static unsigned short product;
module_param(product, ushort, 0);
-MODULE_PARM_DESC (product, "product code (from vendor)");
+MODULE_PARM_DESC(product, "product code (from vendor)");
#endif
static int
@@ -2177,6 +2177,6 @@
}
module_exit (usbtest_exit);
-MODULE_DESCRIPTION ("USB Core/HCD Testing Driver");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION("USB Core/HCD Testing Driver");
+MODULE_LICENSE("GPL");
diff -Naur linux-2.6.14-a/drivers/usb/net/pegasus.c linux-2.6.14-b/drivers/usb/net/pegasus.c
--- linux-2.6.14-a/drivers/usb/net/pegasus.c 2005-11-10 21:16:24.735888152 +0100
+++ linux-2.6.14-b/drivers/usb/net/pegasus.c 2005-11-10 21:32:41.639376248 +0100
@@ -87,7 +87,7 @@
/* use ethtool to change the level for any given device */
static int msg_level = -1;
module_param (msg_level, int, 0);
-MODULE_PARM_DESC (msg_level, "Override default message level");
+MODULE_PARM_DESC(msg_level, "Override default message level");
MODULE_DEVICE_TABLE(usb, pegasus_ids);
diff -Naur linux-2.6.14-a/drivers/usb/net/usbnet.c linux-2.6.14-b/drivers/usb/net/usbnet.c
--- linux-2.6.14-a/drivers/usb/net/usbnet.c 2005-11-10 21:16:24.743886936 +0100
+++ linux-2.6.14-b/drivers/usb/net/usbnet.c 2005-11-10 21:32:41.633377160 +0100
@@ -88,7 +88,7 @@
/* use ethtool to change the level for any given device */
static int msg_level = -1;
module_param (msg_level, int, 0);
-MODULE_PARM_DESC (msg_level, "Override default message level");
+MODULE_PARM_DESC(msg_level, "Override default message level");
/*-------------------------------------------------------------------------*/
diff -Naur linux-2.6.14-a/drivers/usb/serial/safe_serial.c linux-2.6.14-b/drivers/usb/serial/safe_serial.c
--- linux-2.6.14-a/drivers/usb/serial/safe_serial.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/drivers/usb/serial/safe_serial.c 2005-11-10 21:32:41.684369408 +0100
@@ -87,8 +87,8 @@
#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
#define DRIVER_DESC "USB Safe Encapsulated Serial"
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT)
diff -Naur linux-2.6.14-a/sound/oss/wavfront.c linux-2.6.14-b/sound/oss/wavfront.c
--- linux-2.6.14-a/sound/oss/wavfront.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.14-b/sound/oss/wavfront.c 2005-11-10 21:32:44.626922072 +0100
@@ -3494,7 +3494,7 @@
static int irq = -1;
MODULE_AUTHOR ("Paul Barton-Davis <pbd@op.net>");
-MODULE_DESCRIPTION ("Turtle Beach WaveFront Linux Driver");
+MODULE_DESCRIPTION("Turtle Beach WaveFront Linux Driver");
MODULE_LICENSE("GPL");
module_param (io, int, 0);
module_param (irq, int, 0);
next reply other threads:[~2005-11-10 20:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-10 20:42 Kasper Sandberg [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-11-10 20:42 [PATCH] cleanup module metadata declerations Redeeman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1131655366.2185.5.camel@localhost \
--to=lkml@metanurb.dk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.