From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] uart driver From: Marcel Holtmann To: bluez-devel@lists.sourceforge.net In-Reply-To: References: Content-Type: text/plain Message-Id: <1132658587.28644.22.camel@blade> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 22 Nov 2005 12:23:07 +0100 Hi Peter, > you may use the PCMCIA card driver (btuart_cs) as a base and remove all > the PCMCIA specific stuff. Than modify the UART access for your hardware. > > You may also use our PCI driver and removed all PCI specific stuff. > this is based on the PCMCIA driver as well. > The attached version is for 2.6.x. For 2.4.x you can find one on our > website. it will break on the latest 2.6 kernel, because the skb->pkt_type field is no longer used. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel