From: terry <tqiu@neuros.com.cn>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] IO access in U-BOOT
Date: Tue, 29 Nov 2005 16:39:00 +0800 [thread overview]
Message-ID: <1133253541.2543.36.camel@PC6> (raw)
hi,
I use the ARM926ejs, it need set the I/O as input, output or other
status. Also it need read the I/O port.And "all IO is memory mapped".
In u-boot how to support this, where to configure it, or it need write
by myself.
Another question, in uboot, the irq of ARM926ejs was closed by a macro
CONFIG_USE_IRQ. So the irq interrupt is no used, then how u-boot support
the keyboard, network, and IDE hard disk, polling? if need support USB,
can it still use polling driver?
Does someone have more document about the u-boot, I really need
Thank you
Terry
next reply other threads:[~2005-11-29 8:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-29 8:39 terry [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-11-29 8:50 [U-Boot-Users] IO access in U-BOOT 蔡栋
2005-11-29 9:50 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1133253541.2543.36.camel@PC6 \
--to=tqiu@neuros.com.cn \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.