From: Pekka Enberg <penberg@cs.helsinki.fi>
To: James.Bottomley@SteelEye.com
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH] scsi: remove LINUX_VERSION_CODE macro usage from ips
Date: Sat, 14 Jan 2006 18:57:19 +0200 [thread overview]
Message-ID: <1137257840.9318.25.camel@localhost> (raw)
From: Pekka Enberg <penberg@cs.helsinki.fi>
This patch removes LINUX_VERSION_CODE macro usage from the ips driver in
drivers/scsi/.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
drivers/scsi/ips.c | 103 -----------------------------------------------------
drivers/scsi/ips.h | 46 +++++------------------
2 files changed, 11 insertions(+), 138 deletions(-)
Index: 2.6/drivers/scsi/ips.c
===================================================================
--- 2.6.orig/drivers/scsi/ips.c
+++ 2.6/drivers/scsi/ips.c
@@ -184,11 +184,7 @@
#include "scsi.h"
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,0)
-#include "hosts.h"
-#else
#include <scsi/scsi_host.h>
-#endif
#include "ips.h"
@@ -217,18 +213,8 @@ module_param(ips, charp, 0);
#warning "This driver has only been tested on the x86/ia64/x86_64 platforms"
#endif
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,0)
-#include <linux/blk.h>
-#include "sd.h"
-#define IPS_LOCK_SAVE(lock,flags) spin_lock_irqsave(&io_request_lock,flags)
-#define IPS_UNLOCK_RESTORE(lock,flags) spin_unlock_irqrestore(&io_request_lock,flags)
-#ifndef __devexit_p
-#define __devexit_p(x) x
-#endif
-#else
#define IPS_LOCK_SAVE(lock,flags) do{spin_lock(lock);(void)flags;}while(0)
#define IPS_UNLOCK_RESTORE(lock,flags) do{spin_unlock(lock);(void)flags;}while(0)
-#endif
#define IPS_DMA_DIR(scb) ((!scb->scsi_cmd || ips_is_passthru(scb->scsi_cmd) || \
DMA_NONE == scb->scsi_cmd->sc_data_direction) ? \
@@ -385,24 +371,13 @@ static struct scsi_host_template ips_dri
.eh_abort_handler = ips_eh_abort,
.eh_host_reset_handler = ips_eh_reset,
.proc_name = "ips",
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
.proc_info = ips_proc_info,
.slave_configure = ips_slave_configure,
-#else
- .proc_info = ips_proc24_info,
- .select_queue_depths = ips_select_queue_depth,
-#endif
.bios_param = ips_biosparam,
.this_id = -1,
.sg_tablesize = IPS_MAX_SG,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- .use_new_eh_code = 1,
-#endif
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) && LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- .highmem_io = 1,
-#endif
};
@@ -1185,17 +1160,10 @@ ips_queue(Scsi_Cmnd * SC, void (*done) (
/* */
/****************************************************************************/
static int
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-ips_biosparam(Disk * disk, kdev_t dev, int geom[])
-{
- ips_ha_t *ha = (ips_ha_t *) disk->device->host->hostdata;
- unsigned long capacity = disk->capacity;
-#else
ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[])
{
ips_ha_t *ha = (ips_ha_t *) sdev->host->hostdata;
-#endif
int heads;
int sectors;
int cylinders;
@@ -1233,70 +1201,6 @@ ips_biosparam(struct scsi_device *sdev,
return (0);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-
-/* ips_proc24_info is a wrapper around ips_proc_info *
- * for compatibility with the 2.4 scsi parameters */
-static int
-ips_proc24_info(char *buffer, char **start, off_t offset, int length,
- int hostno, int func)
-{
- int i;
-
- for (i = 0; i < ips_next_controller; i++) {
- if (ips_sh[i] && ips_sh[i]->host_no == hostno) {
- return ips_proc_info(ips_sh[i], buffer, start,
- offset, length, func);
- }
- }
- return -EINVAL;
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_select_queue_depth */
-/* */
-/* Routine Description: */
-/* */
-/* Select queue depths for the devices on the contoller */
-/* */
-/****************************************************************************/
-static void
-ips_select_queue_depth(struct Scsi_Host *host, struct scsi_device * scsi_devs)
-{
- struct scsi_device *device;
- ips_ha_t *ha;
- int count = 0;
- int min;
-
- ha = IPS_HA(host);
- min = ha->max_cmds / 4;
-
- for (device = scsi_devs; device; device = device->next) {
- if (device->host == host) {
- if ((device->channel == 0) && (device->type == 0))
- count++;
- }
- }
-
- for (device = scsi_devs; device; device = device->next) {
- if (device->host == host) {
- if ((device->channel == 0) && (device->type == 0)) {
- device->queue_depth =
- (ha->max_cmds - 1) / count;
- if (device->queue_depth < min)
- device->queue_depth = min;
- } else {
- device->queue_depth = 2;
- }
-
- if (device->queue_depth < 2)
- device->queue_depth = 2;
- }
- }
-}
-
-#else
/****************************************************************************/
/* */
/* Routine Name: ips_slave_configure */
@@ -1321,7 +1225,6 @@ ips_slave_configure(struct scsi_device *
}
return 0;
}
-#endif
/****************************************************************************/
/* */
@@ -7025,10 +6928,7 @@ ips_register_scsi(int index)
sh->unchecked_isa_dma = sh->hostt->unchecked_isa_dma;
sh->use_clustering = sh->hostt->use_clustering;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,7)
sh->max_sectors = 128;
-#endif
-
sh->max_id = ha->ntargets;
sh->max_lun = ha->nlun;
sh->max_channel = ha->nbus - 1;
@@ -7451,10 +7351,7 @@ ips_init_phase2(int index)
return SUCCESS;
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,9)
MODULE_LICENSE("GPL");
-#endif
-
MODULE_DESCRIPTION("IBM ServeRAID Adapter Driver " IPS_VER_STRING);
#ifdef MODULE_VERSION
Index: 2.6/drivers/scsi/ips.h
===================================================================
--- 2.6.orig/drivers/scsi/ips.h
+++ 2.6/drivers/scsi/ips.h
@@ -57,7 +57,7 @@
/*
* Some handy macros
*/
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) || defined CONFIG_HIGHIO
+ #if defined CONFIG_HIGHIO
#define IPS_HIGHIO
#endif
@@ -83,11 +83,6 @@
#define IPS_SGLIST_SIZE(ha) (IPS_USE_ENH_SGLIST(ha) ? \
sizeof(IPS_ENH_SG_LIST) : sizeof(IPS_STD_SG_LIST))
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,4)
- #define pci_set_dma_mask(dev,mask) ( mask > 0xffffffff ? 1:0 )
- #define scsi_set_pci_device(sh,dev) (0)
- #endif
-
#ifndef IRQ_NONE
typedef void irqreturn_t;
#define IRQ_NONE
@@ -95,26 +90,13 @@
#define IRQ_RETVAL(x)
#endif
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- #define IPS_REGISTER_HOSTS(SHT) scsi_register_module(MODULE_SCSI_HA,SHT)
- #define IPS_UNREGISTER_HOSTS(SHT) scsi_unregister_module(MODULE_SCSI_HA,SHT)
- #define IPS_ADD_HOST(shost,device)
- #define IPS_REMOVE_HOST(shost)
- #define IPS_SCSI_SET_DEVICE(sh,ha) scsi_set_pci_device(sh, (ha)->pcidev)
- #define IPS_PRINTK(level, pcidev, format, arg...) \
- printk(level "%s %s:" format , "ips" , \
- (pcidev)->slot_name , ## arg)
- #define scsi_host_alloc(sh,size) scsi_register(sh,size)
- #define scsi_host_put(sh) scsi_unregister(sh)
- #else
- #define IPS_REGISTER_HOSTS(SHT) (!ips_detect(SHT))
- #define IPS_UNREGISTER_HOSTS(SHT)
- #define IPS_ADD_HOST(shost,device) do { scsi_add_host(shost,device); scsi_scan_host(shost); } while (0)
- #define IPS_REMOVE_HOST(shost) scsi_remove_host(shost)
- #define IPS_SCSI_SET_DEVICE(sh,ha) do { } while (0)
- #define IPS_PRINTK(level, pcidev, format, arg...) \
- dev_printk(level , &((pcidev)->dev) , format , ## arg)
- #endif
+ #define IPS_REGISTER_HOSTS(SHT) (!ips_detect(SHT))
+ #define IPS_UNREGISTER_HOSTS(SHT)
+ #define IPS_ADD_HOST(shost,device) do { scsi_add_host(shost,device); scsi_scan_host(shost); } while (0)
+ #define IPS_REMOVE_HOST(shost) scsi_remove_host(shost)
+ #define IPS_SCSI_SET_DEVICE(sh,ha) do { } while (0)
+ #define IPS_PRINTK(level, pcidev, format, arg...) \
+ dev_printk(level , &((pcidev)->dev) , format , ## arg)
#ifndef MDELAY
#define MDELAY mdelay
@@ -448,16 +430,10 @@
/*
* Scsi_Host Template
*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- static int ips_proc24_info(char *, char **, off_t, int, int, int);
- static void ips_select_queue_depth(struct Scsi_Host *, struct scsi_device *);
- static int ips_biosparam(Disk *disk, kdev_t dev, int geom[]);
-#else
- static int ips_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
- static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+static int ips_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
+static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[]);
- static int ips_slave_configure(struct scsi_device *SDptr);
-#endif
+static int ips_slave_configure(struct scsi_device *SDptr);
/*
* Raid Command Formats
reply other threads:[~2006-01-14 16:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1137257840.9318.25.camel@localhost \
--to=penberg@cs.helsinki.fi \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.