From: "Michael Thonke" <TK-SHOCKWAVE@web.de>
To: linux-kernel@vger.kernel.org
Subject: NForce3 SATA badness with remove/add devices
Date: Sun, 31 Oct 2004 02:07:38 +0200 [thread overview]
Message-ID: <1137352821@web.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 6233 bytes --]
Hello Jeff or someone who read this,
its my 3 attemp (LKML Post 0410.2/0129l) to get a answer to following thing.
First of all I'm using a NForce 3 250GB (MSI K8N Neo2 Platinum)
With 3 SATA disks
Maxtor 6B200M/NCQ
2xSamsung SP1213C
My Problem is when the kernel starts with libsata and sata_nv compiled in
when I boot the System with libsata and sata_nv it removes the first disk (Maxtor 6B200B)
then a abnormal timeout occur while adding the device: this message appears
error is "ATA: abnormal status 0x0D on port 0x9E7" and "ata is to slow to answer"
now the corious thing on that is if I wait 40 or 50 sec maybe it work or maybe not..
when I'm using the old "CONFIG_BLK_DEV_IDE_SATA:"
everything works great here. I dont know whats wrong but i tested it on 5 Motherboard
there the Maxtor working without hicks (VIA KT880Pro,i875P,i925,SIS755,Promise 378 SATA TX2,
but when I plug it on a NForce 3 250GB (MSI K8N Neo2 or Gigabyte K8NSNXP or even new MSI K8N Neo2)
the same timeout occur..the Maxtor 6B200M is SATA2 but full SATA compatible.
I thought it is because of hotplug support but disabling all this stuff did not work.
I hope someone know why this happen and how to fix this.
Thanks for help
here are the lspci -v output
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev a1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
Flags: bus master, 66Mhz, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable)
Capabilities: [44] #08 [01c0]
Capabilities: [c0] AGP version 3.0
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
Flags: bus master, 66Mhz, fast devsel, latency 0
0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
Flags: 66Mhz, fast devsel, IRQ 177
I/O ports at ec00
I/O ports at 4c00 [size=64]
I/O ports at 4c40 [size=64]
Capabilities: [44] Power Management version 2
0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 177
Memory at ec000000 (32-bit, non-prefetchable)
I/O ports at a800 [size=8]
Capabilities: [44] Power Management version 2
0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
Flags: bus master, 66Mhz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
0000:00:09.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 193
I/O ports at 09e0
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at cc00 [size=16]
I/O ports at d000 [size=128]
Capabilities: [44] Power Management version 2
0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 0250
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 201
I/O ports at 09f0
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at e400 [size=16]
I/O ports at e800 [size=128]
Capabilities: [44] Power Management version 2
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 00009000-00009fff
Memory behind bridge: ea000000-ebffffff
Expansion ROM at 00009000 [disabled] [size=4K]
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] #08 [2101]
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
0000:01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900XT] (rev a1) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc.: Unknown device 2975
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 209
Memory at e8000000 (32-bit, non-prefetchable)
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
0000:02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 025c
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 209
I/O ports at 9000
Memory at eb000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
________________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 1440 bytes --]
next reply other threads:[~2004-10-31 0:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-31 0:07 Michael Thonke [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-11-01 20:35 NForce3 SATA badness with remove/add devices Andrew Chew
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1137352821@web.de \
--to=tk-shockwave@web.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.