From: "Gerhard Pircher" <gerhard_pircher@gmx.net>
To: linuxppc-dev@ozlabs.org,debian-powerpc@lists.debian.org
Subject: AmigaOne PPC Linux: Problems with Interrupts
Date: Tue, 21 Feb 2006 20:07:10 +0100 (MET) [thread overview]
Message-ID: <11408.1140548830@www018.gmx.net> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 2892 bytes --]
Hi,
I encountered some problems with Linux PPC on the AmigaOne. As you can see
in the /proc/interrupts output below, the AmigaOne has a i8259 PIC (no
OpenPIC). The first problem is, that the interrupts 7 and 10 are shown as
"Edge" triggered, but they're set to "Level" in the u-boot (firmware)
preferences. I'm not sure, if u-boot setups the interrupts, therefore I
added this code to the platform PCI initialisation code (copied from
prep_pci.c):
void __init
amigaone_pcibios_fixup(void)
{
/* IRQ 7 is level triggered. */
unsigned char irq_edge_mask_lo = 0x80;
/* IRQ, 9, 10, 11 is level triggered. */
unsigned char irq_edge_mask_hi = 0x07;
outb(inb(0x04d0)|irq_edge_mask_lo, 0x4d0); /* primary 8259 */
outb(inb(0x04d1)|irq_edge_mask_hi, 0x4d1); /* cascaded 8259 */
}
Unortunately this didn't help and the interrupts seem to be still "edge"
triggered.
/proc/interrupts:
CPU0
1: 189 i8259 Edge i8042
2: 0 i8259 Edge 82c59 secondary cascade
5: 0 i8259 Edge uhci_hcd, uhci_hcd
7: 546 i8259 Edge eth0
10: 0 i8259 Edge EMU10K1
12: 8217 i8259 Edge i8042
14: 19597 i8259 Edge ide0
15: 18951 i8259 Edge ide1
BAD: 2
The other issue are the 2 BAD interrupts shown above. Does this have to do
something with the "edge" or "level" triggered mode or is it a interrupt
routing problem?
Thanks!
Gerhard
Other infos:
/proc/ioports
00000000-00bfffff : PCI host bridge
00000000-0000001f : dma1
00000020-00000021 : 8259 (master)
00000040-0000005f : timer
00000060-0000006f : i8042
00000080-0000008f : dma page reg
000000a0-000000a1 : 8259 (slave)
000000c0-000000df : dma2
00000170-00000177 : ide1
000001f0-000001f7 : ide0
00000278-0000027a : parport2
000002f8-000002ff : serial
00000376-00000376 : ide1
00000378-0000037a : parport0
000003bc-000003be : parport1
000003c0-000003df : vga+
000003e8-000003ef : serial
000003f6-000003f6 : ide0
000003f8-000003ff : serial
000004d0-000004d1 : 8259 edge control
00002000-00002fff : PCI Bus #01
00002000-000020ff : 0000:01:00.0
0000cc00-0000cc0f : 0000:00:07.1
0000cc00-0000cc07 : ide0
0000cc08-0000cc0f : ide1
00802000-0080207f : 0000:00:06.0
00802000-0080207f : 0000:00:06.0
00802080-0080209f : 0000:00:07.2
00802080-0080209f : uhci_hcd
008020a0-008020bf : 0000:00:07.3
008020a0-008020bf : uhci_hcd
00802100-008021ff : 0000:00:07.5
00802200-00802203 : 0000:00:07.5
00802204-00802207 : 0000:00:07.5
00802300-008023ff : 0000:00:07.6
00802400-0080241f : 0000:00:09.0
00802400-0080241f : EMU10K1
00802420-00802427 : 0000:00:09.1
00802420-00802427 : emu10k1-gp
--
10 GB Mailbox, 100 FreeSMS/Monat http://www.gmx.net/de/go/topmail
+++ GMX - die erste Adresse für Mail, Message, More +++
reply other threads:[~2006-02-21 19:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11408.1140548830@www018.gmx.net \
--to=gerhard_pircher@gmx.net \
--cc=debian-powerpc@lists.debian.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.