From: Eric Sesterhenn <snakebyte@gmx.de>
To: kernel-janitors@vger.kernel.org
Subject: [KJ] [Patch] kzalloc() conversion in drivers/video
Date: Fri, 24 Feb 2006 21:17:28 +0000 [thread overview]
Message-ID: <1140815848.26064.4.camel@alice> (raw)
[-- Attachment #1: Type: text/plain, Size: 15595 bytes --]
hi,
this patch converts drivers/video to kzalloc usage.
Compile tested with allyes config. It also contains a formating change
in video/matrox/matroxfb_maven.c, i am not sure if it is ok to
remove the cast, to keep it on a single line to make it more readable.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
--- linux-2.6.16-rc4/drivers/video/au1100fb.c.orig 2006-02-24 21:50:38.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/au1100fb.c 2006-02-24 21:52:45.000000000 +0100
@@ -444,11 +444,10 @@ int au1100fb_drv_probe(struct device *de
return -EINVAL;
/* Allocate new device private */
- if (!(fbdev = kmalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
+ if (!(fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
print_err("fail to allocate device private record");
return -ENOMEM;
}
- memset((void*)fbdev, 0, sizeof(struct au1100fb_device));
fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
@@ -525,10 +524,8 @@ int au1100fb_drv_probe(struct device *de
fbdev->info.fbops = &au1100fb_ops;
fbdev->info.fix = au1100fb_fix;
- if (!(fbdev->info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL))) {
+ if (!(fbdev->info.pseudo_palette = kcalloc(16, sizeof(u32), GFP_KERNEL)))
return -ENOMEM;
- }
- memset(fbdev->info.pseudo_palette, 0, sizeof(u32) * 16);
if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
print_err("Fail to allocate colormap (%d entries)",
--- linux-2.6.16-rc4/drivers/video/matrox/matroxfb_crtc2.c.orig 2006-02-24 21:53:00.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/matrox/matroxfb_crtc2.c 2006-02-24 21:53:26.000000000 +0100
@@ -694,12 +694,11 @@ static void* matroxfb_crtc2_probe(struct
/* hardware is CRTC2 incapable... */
if (!ACCESS_FBINFO(devflags.crtc2))
return NULL;
- m2info = (struct matroxfb_dh_fb_info*)kmalloc(sizeof(*m2info), GFP_KERNEL);
+ m2info = (struct matroxfb_dh_fb_info*)kzalloc(sizeof(*m2info), GFP_KERNEL);
if (!m2info) {
printk(KERN_ERR "matroxfb_crtc2: Not enough memory for CRTC2 control structs\n");
return NULL;
}
- memset(m2info, 0, sizeof(*m2info));
m2info->primary_dev = MINFO;
if (matroxfb_dh_registerfb(m2info)) {
kfree(m2info);
--- linux-2.6.16-rc4/drivers/video/matrox/matroxfb_maven.c.orig 2006-02-24 21:53:35.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/matrox/matroxfb_maven.c 2006-02-24 21:56:22.000000000 +0100
@@ -1243,12 +1243,13 @@ static int maven_detect_client(struct i2
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_PROTOCOL_MANGLING))
goto ERROR0;
- if (!(new_client = (struct i2c_client*)kmalloc(sizeof(*new_client) + sizeof(*data),
- GFP_KERNEL))) {
+
+ new_client = (struct i2c_client*)kzalloc(sizeof(*new_client) + sizeof(*data),
+ GFP_KERNEL);
+ if (!new_client) {
err = -ENOMEM;
goto ERROR0;
}
- memset(new_client, 0, sizeof(*new_client) + sizeof(*data));
data = (struct maven_data*)(new_client + 1);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
--- linux-2.6.16-rc4/drivers/video/cg14.c.orig 2006-02-24 21:56:33.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/cg14.c 2006-02-24 21:56:52.000000000 +0100
@@ -480,12 +480,11 @@ static void cg14_init_one(struct sbus_de
}
}
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "cg14: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/valkyriefb.c.orig 2006-02-24 21:57:03.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/valkyriefb.c 2006-02-24 21:57:14.000000000 +0100
@@ -359,10 +359,9 @@ int __init valkyriefb_init(void)
}
#endif /* ppc (!CONFIG_MAC) */
- p = kmalloc(sizeof(*p), GFP_ATOMIC);
+ p = kzalloc(sizeof(*p), GFP_ATOMIC);
if (p == 0)
return -ENOMEM;
- memset(p, 0, sizeof(*p));
/* Map in frame buffer and registers */
if (!request_mem_region(frame_buffer_phys, 0x100000, "valkyriefb")) {
--- linux-2.6.16-rc4/drivers/video/cg3.c.orig 2006-02-24 21:58:47.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/cg3.c 2006-02-24 21:58:58.000000000 +0100
@@ -369,12 +369,11 @@ static void cg3_init_one(struct sbus_dev
struct all_info *all;
int linebytes;
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "cg3: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/aty/atyfb_base.c.orig 2006-02-24 21:59:19.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/aty/atyfb_base.c 2006-02-24 21:59:47.000000000 +0100
@@ -2853,12 +2853,11 @@ static int __devinit atyfb_setup_sparc(s
/* nothing */ ;
j = i + 4;
- par->mmap_map = kmalloc(j * sizeof(*par->mmap_map), GFP_ATOMIC);
+ par->mmap_map = kzalloc(j * sizeof(*par->mmap_map), GFP_ATOMIC);
if (!par->mmap_map) {
PRINTKE("atyfb_setup_sparc() can't alloc mmap_map\n");
return -ENOMEM;
}
- memset(par->mmap_map, 0, j * sizeof(*par->mmap_map));
for (i = 0, j = 2; i < 6 && pdev->resource[i].start; i++) {
struct resource *rp = &pdev->resource[i];
--- linux-2.6.16-rc4/drivers/video/leo.c.orig 2006-02-24 21:59:55.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/leo.c 2006-02-24 22:00:05.000000000 +0100
@@ -541,12 +541,11 @@ static void leo_init_one(struct sbus_dev
struct all_info *all;
int linebytes;
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "leo: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/igafb.c.orig 2006-02-24 22:00:16.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/igafb.c 2006-02-24 22:00:48.000000000 +0100
@@ -404,12 +404,11 @@ int __init igafb_init(void)
size = sizeof(struct fb_info) + sizeof(struct iga_par) + sizeof(u32)*16;
- info = kmalloc(size, GFP_ATOMIC);
+ info = kzalloc(size, GFP_ATOMIC);
if (!info) {
printk("igafb_init: can't alloc fb_info\n");
return -ENOMEM;
}
- memset(info, 0, size);
par = (struct iga_par *) (info + 1);
@@ -468,7 +467,7 @@ int __init igafb_init(void)
* one additional region with size == 0.
*/
- par->mmap_map = kmalloc(4 * sizeof(*par->mmap_map), GFP_ATOMIC);
+ par->mmap_map = kzalloc(4 * sizeof(*par->mmap_map), GFP_ATOMIC);
if (!par->mmap_map) {
printk("igafb_init: can't alloc mmap_map\n");
iounmap((void *)par->io_base);
@@ -477,8 +476,6 @@ int __init igafb_init(void)
return -ENOMEM;
}
- memset(par->mmap_map, 0, 4 * sizeof(*par->mmap_map));
-
/*
* Set default vmode and cmode from PROM properties.
*/
--- linux-2.6.16-rc4/drivers/video/bw2.c.orig 2006-02-24 22:00:58.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/bw2.c 2006-02-24 22:01:05.000000000 +0100
@@ -301,12 +301,11 @@ static void bw2_init_one(struct sbus_dev
#endif
int linebytes;
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "bw2: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/nvidia/nvidia.c.orig 2006-02-24 22:01:15.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/nvidia/nvidia.c 2006-02-24 22:02:05.000000000 +0100
@@ -1566,13 +1566,11 @@ static int __devinit nvidiafb_probe(stru
par = info->par;
par->pci_dev = pd;
- info->pixmap.addr = kmalloc(8 * 1024, GFP_KERNEL);
+ info->pixmap.addr = kzalloc(8 * 1024, GFP_KERNEL);
if (info->pixmap.addr == NULL)
goto err_out_kfree;
- memset(info->pixmap.addr, 0, 8 * 1024);
-
if (pci_enable_device(pd)) {
printk(KERN_ERR PFX "cannot enable PCI device\n");
goto err_out_enable;
--- linux-2.6.16-rc4/drivers/video/retz3fb.c.orig 2006-02-24 22:02:16.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/retz3fb.c 2006-02-24 22:02:34.000000000 +0100
@@ -1370,10 +1370,9 @@ int __init retz3fb_init(void)
release_mem_region(board_addr, 0x00c00000);
continue;
}
- if (!(zinfo = kmalloc(sizeof(struct retz3_fb_info),
+ if (!(zinfo = kzalloc(sizeof(struct retz3_fb_info),
GFP_KERNEL)))
return -ENOMEM;
- memset(zinfo, 0, sizeof(struct retz3_fb_info));
zinfo->base = ioremap(board_addr, board_size);
zinfo->regs = zinfo->base;
--- linux-2.6.16-rc4/drivers/video/tgafb.c.orig 2006-02-24 22:02:42.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/tgafb.c 2006-02-24 22:02:51.000000000 +0100
@@ -1396,12 +1396,11 @@ tgafb_pci_register(struct pci_dev *pdev,
}
/* Allocate the fb and par structures. */
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "tgafb: Cannot allocate memory\n");
return -ENOMEM;
}
- memset(all, 0, sizeof(*all));
pci_set_drvdata(pdev, all);
/* Request the mem regions. */
--- linux-2.6.16-rc4/drivers/video/i810/i810_main.c.orig 2006-02-24 22:03:12.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/i810/i810_main.c 2006-02-24 22:03:31.000000000 +0100
@@ -2012,11 +2012,10 @@ static int __devinit i810fb_init_pci (st
par = info->par;
par->dev = dev;
- if (!(info->pixmap.addr = kmalloc(8*1024, GFP_KERNEL))) {
+ if (!(info->pixmap.addr = kzalloc(8*1024, GFP_KERNEL))) {
i810fb_release_resource(info, par);
return -ENOMEM;
}
- memset(info->pixmap.addr, 0, 8*1024);
info->pixmap.size = 8*1024;
info->pixmap.buf_align = 8;
info->pixmap.access_align = 32;
--- linux-2.6.16-rc4/drivers/video/clps711xfb.c.orig 2006-02-24 22:03:44.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/clps711xfb.c 2006-02-24 22:03:55.000000000 +0100
@@ -366,11 +366,10 @@ int __init clps711xfb_init(void)
if (fb_get_options("clps711xfb", NULL))
return -ENODEV;
- cfb = kmalloc(sizeof(*cfb), GFP_KERNEL);
+ cfb = kzalloc(sizeof(*cfb), GFP_KERNEL);
if (!cfb)
goto out;
- memset(cfb, 0, sizeof(*cfb));
strcpy(cfb->fix.id, "clps711x");
cfb->fbops = &clps7111fb_ops;
--- linux-2.6.16-rc4/drivers/video/controlfb.c.orig 2006-02-24 22:04:05.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/controlfb.c 2006-02-24 22:04:19.000000000 +0100
@@ -694,11 +694,10 @@ static int __init control_of_init(struct
printk(KERN_ERR "can't get 2 addresses for control\n");
return -ENXIO;
}
- p = kmalloc(sizeof(*p), GFP_KERNEL);
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
if (p == 0)
return -ENXIO;
control_fb = p; /* save it for cleanups */
- memset(p, 0, sizeof(*p));
/* Map in frame buffer and registers */
p->fb_orig_base = fb_res.start;
--- linux-2.6.16-rc4/drivers/video/cyber2000fb.c.orig 2006-02-24 22:04:33.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/cyber2000fb.c 2006-02-24 22:04:44.000000000 +0100
@@ -1223,12 +1223,10 @@ cyberpro_alloc_fb_info(unsigned int id,
{
struct cfb_info *cfb;
- cfb = kmalloc(sizeof(struct cfb_info), GFP_KERNEL);
+ cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL);
if (!cfb)
return NULL;
- memset(cfb, 0, sizeof(struct cfb_info));
-
cfb->id = id;
if (id == ID_CYBERPRO_5000)
--- linux-2.6.16-rc4/drivers/video/tcx.c.orig 2006-02-24 22:04:54.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/tcx.c 2006-02-24 22:05:03.000000000 +0100
@@ -359,12 +359,11 @@ static void tcx_init_one(struct sbus_dev
struct all_info *all;
int linebytes, i;
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "tcx: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/ffb.c.orig 2006-02-24 22:05:11.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/ffb.c 2006-02-24 22:05:17.000000000 +0100
@@ -940,12 +940,11 @@ static void ffb_init_one(int node, int p
return;
}
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "ffb: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/sun3fb.c.orig 2006-02-24 22:05:24.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/sun3fb.c 2006-02-24 22:06:14.000000000 +0100
@@ -526,11 +526,10 @@ static int __init sun3fb_init_fb(int fbt
int linebytes, w, h, depth;
char *p = NULL;
- fb = kmalloc(sizeof(struct fb_info_sbusfb), GFP_ATOMIC);
+ fb = kzalloc(sizeof(struct fb_info_sbusfb), GFP_ATOMIC);
if (!fb)
return -ENOMEM;
- memset(fb, 0, sizeof(struct fb_info_sbusfb));
fix = &fb->fix;
var = &fb->var;
disp = &fb->disp;
--- linux-2.6.16-rc4/drivers/video/savage/savagefb_driver.c.orig 2006-02-24 22:06:27.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/savage/savagefb_driver.c 2006-02-24 22:06:44.000000000 +0100
@@ -1950,11 +1950,10 @@ static int __devinit savage_init_fb_info
#if defined(CONFIG_FB_SAVAGE_ACCEL)
/* FIFO size + padding for commands */
- info->pixmap.addr = kmalloc(8*1024, GFP_KERNEL);
+ info->pixmap.addr = kzalloc(8*1024, GFP_KERNEL);
err = -ENOMEM;
if (info->pixmap.addr) {
- memset(info->pixmap.addr, 0, 8*1024);
info->pixmap.size = 8*1024;
info->pixmap.scan_align = 4;
info->pixmap.buf_align = 4;
--- linux-2.6.16-rc4/drivers/video/riva/fbdev.c.orig 2006-02-24 22:08:25.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/riva/fbdev.c 2006-02-24 22:08:44.000000000 +0100
@@ -1888,12 +1888,11 @@ static int __devinit rivafb_probe(struct
default_par = info->par;
default_par->pdev = pd;
- info->pixmap.addr = kmalloc(8 * 1024, GFP_KERNEL);
+ info->pixmap.addr = kzalloc(8 * 1024, GFP_KERNEL);
if (info->pixmap.addr == NULL) {
ret = -ENOMEM;
goto err_framebuffer_release;
}
- memset(info->pixmap.addr, 0, 8 * 1024);
ret = pci_enable_device(pd);
if (ret < 0) {
--- linux-2.6.16-rc4/drivers/video/cg6.c.orig 2006-02-24 22:08:54.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/cg6.c 2006-02-24 22:09:03.000000000 +0100
@@ -667,12 +667,11 @@ static void cg6_init_one(struct sbus_dev
struct all_info *all;
int linebytes;
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "cg6: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/p9100.c.orig 2006-02-24 22:09:11.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/p9100.c 2006-02-24 22:09:18.000000000 +0100
@@ -272,12 +272,11 @@ static void p9100_init_one(struct sbus_d
struct all_info *all;
int linebytes;
- all = kmalloc(sizeof(*all), GFP_KERNEL);
+ all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "p9100: Cannot allocate memory.\n");
return;
}
- memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
--- linux-2.6.16-rc4/drivers/video/intelfb/intelfbdrv.c.orig 2006-02-24 22:09:32.000000000 +0100
+++ linux-2.6.16-rc4/drivers/video/intelfb/intelfbdrv.c 2006-02-24 22:09:43.000000000 +0100
@@ -526,12 +526,11 @@ intelfb_pci_register(struct pci_dev *pde
dinfo->pdev = pdev;
/* Reserve pixmap space. */
- info->pixmap.addr = kmalloc(64 * 1024, GFP_KERNEL);
+ info->pixmap.addr = kzalloc(64 * 1024, GFP_KERNEL);
if (info->pixmap.addr == NULL) {
ERR_MSG("Cannot reserve pixmap memory.\n");
goto err_out_pixmap;
}
- memset(info->pixmap.addr, 0, 64 * 1024);
/* set early this option because it could be changed by tv encoder
driver */
[-- Attachment #2: Type: text/plain, Size: 168 bytes --]
_______________________________________________
Kernel-janitors mailing list
Kernel-janitors@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/kernel-janitors
next reply other threads:[~2006-02-24 21:17 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-24 21:17 Eric Sesterhenn [this message]
2006-02-27 9:22 ` [KJ] [Patch] kzalloc() conversion in drivers/atm Eric Sesterhenn
2006-02-27 9:43 ` Tobias Klauser
2006-02-27 11:16 ` Eric Sesterhenn
2006-02-27 16:22 ` [KJ] [Patch] kzalloc() conversion in drivers/usb Eric Sesterhenn
2006-02-27 20:36 ` [KJ] [Patch] kzalloc() conversion in drivers/usb/gadget Eric Sesterhenn
2006-02-27 20:51 ` Jesper Juhl
2006-02-28 13:54 ` [KJ] [Patch] kzalloc() conversion in drivers/acpi Eric Sesterhenn
2006-02-28 13:54 ` [KJ] [Patch] kzalloc() conversion in drivers/s390 Eric Sesterhenn
2006-02-28 14:34 ` [KJ] [Patch] kzalloc() conversion in drivers/pci Eric Sesterhenn
2006-02-28 21:39 ` [KJ] [Patch] kzalloc() conversion in drivers/usb/gadget Alexey Dobriyan
2006-02-28 21:49 ` Jesper Juhl
2006-03-01 9:00 ` [KJ] [Patch] kzalloc() conversion in drivers/char Eric Sesterhenn
2006-03-01 23:29 ` [KJ] [Patch] kzalloc() conversion in drivers/mtd Eric Sesterhenn
2006-03-02 11:58 ` [KJ] [Patch] kzalloc() conversion in drivers/serial Eric Sesterhenn
2006-03-04 17:56 ` [KJ] [Patch] kzalloc() conversion in drivers/net Eric Sesterhenn
2006-03-04 17:56 ` Eric Sesterhenn
2006-03-04 19:09 ` [KJ] [Patch] kzalloc() conversion in drivers/md Eric Sesterhenn
2006-03-04 19:09 ` [KJ] [Patch] kzalloc() conversion in drivers/macintosh Eric Sesterhenn
2006-03-04 19:09 ` [KJ] [Patch] kzalloc() conversion in drivers/block Eric Sesterhenn
2006-03-05 8:41 ` [KJ] [Patch] kzalloc() conversion in drivers/sbus Eric Sesterhenn
2006-03-05 15:02 ` [KJ] [Patch] kzalloc() conversion in drivers/telephony/ Eric Sesterhenn
2006-03-05 15:02 ` [KJ] [Patch] kzalloc() conversion in drivers/rapidio Eric Sesterhenn
2006-03-05 15:02 ` [KJ] [Patch] kzalloc() conversion in drivers/misc/ Eric Sesterhenn
2006-03-05 15:02 ` [KJ] [Patch] kzalloc() conversion in drivers/mfd/ Eric Sesterhenn
2006-03-05 15:02 ` [KJ] [Patch] kzalloc() conversion in drivers/media/ Eric Sesterhenn
2006-03-05 15:02 ` [KJ] [Patch] kzalloc() conversion in drivers/block Eric Sesterhenn
2006-03-05 21:02 ` [KJ] [Patch] kzalloc() conversion in drivers/sh Eric Sesterhenn
2006-03-05 21:02 ` [KJ] [Patch] kzalloc() conversion in drivers/pnp Eric Sesterhenn
2006-03-05 21:02 ` [KJ] [Patch] kzalloc() conversion in drivers/nubus Eric Sesterhenn
2006-03-05 21:02 ` [KJ] [Patch] kzalloc() conversion in drivers/mca Eric Sesterhenn
2006-03-05 21:02 ` [KJ] [Patch] kzalloc() conversion in drivers/message Eric Sesterhenn
2006-03-05 21:02 ` [KJ] [Patch] kzalloc() conversion in drivers/acorn/ Eric Sesterhenn
2006-03-06 20:13 ` [KJ] [Patch] kzalloc() conversion in drivers/parport/ Eric Sesterhenn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1140815848.26064.4.camel@alice \
--to=snakebyte@gmx.de \
--cc=kernel-janitors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.