From: Kristen Accardi <kristen.c.accardi@intel.com>
To: pcihpd-discuss@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org, greg@kroah.com
Subject: [patch] pci hotplug: add common acpi functions to core
Date: Tue, 28 Feb 2006 16:46:57 -0800 [thread overview]
Message-ID: <1141174017.28842.6.camel@whizzy> (raw)
shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
In addition, there are functions in both these files that
are also in acpiphp_glue.c. This patch will remove duplicate
functions from shpchp, pciehp, and acpiphp and move this
functionality to pci_hotplug, as it is not hardware specific.
Get rid of shpchprm* and pciehprm* files since they are no longer needed.
shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well
as shpchprm_legacy.c and can be replaced with a macro.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
---
dev/null |binary
dev/null |binary
drivers/pci/hotplug/pciehprm_acpi.c | 257 ---------------------------------
drivers/pci/hotplug/pciehprm_nonacpi.c | 47 ------
drivers/pci/hotplug/shpchprm_acpi.c | 186 -----------------------
drivers/pci/hotplug/shpchprm_legacy.c | 54 ------
drivers/pci/hotplug/shpchprm_nonacpi.c | 57 -------
drivers/pci/hotplug/Makefile | 17 --
drivers/pci/hotplug/acpi_pcihp.c | 201 +++++++++++++++++++++++++
drivers/pci/hotplug/acpiphp_glue.c | 28 ---
drivers/pci/hotplug/pci_hotplug.h | 17 ++
drivers/pci/hotplug/pciehp.h | 19 +-
drivers/pci/hotplug/pciehp_hpc.c | 69 ++++++++
drivers/pci/hotplug/shpchp.h | 25 +--
drivers/pci/hotplug/shpchp_core.c | 17 ++
13 files changed, 331 insertions(+), 663 deletions(-)
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/Makefile
+++ 2.6-git-gregkh/drivers/pci/hotplug/Makefile
@@ -22,6 +22,9 @@ ifdef CONFIG_HOTPLUG_PCI_CPCI
pci_hotplug-objs += cpci_hotplug_core.o \
cpci_hotplug_pci.o
endif
+ifdef CONFIG_ACPI
+pci_hotplug-objs += acpi_pcihp.o
+endif
cpqphp-objs := cpqphp_core.o \
cpqphp_ctrl.o \
@@ -51,23 +54,9 @@ pciehp-objs := pciehp_core.o \
pciehp_ctrl.o \
pciehp_pci.o \
pciehp_hpc.o
-ifdef CONFIG_ACPI
- pciehp-objs += pciehprm_acpi.o
-else
- pciehp-objs += pciehprm_nonacpi.o
-endif
shpchp-objs := shpchp_core.o \
shpchp_ctrl.o \
shpchp_pci.o \
shpchp_sysfs.o \
shpchp_hpc.o
-ifdef CONFIG_ACPI
- shpchp-objs += shpchprm_acpi.o
-else
- ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
- shpchp-objs += shpchprm_legacy.o
- else
- shpchp-objs += shpchprm_nonacpi.o
- endif
-endif
--- /dev/null
+++ 2.6-git-gregkh/drivers/pci/hotplug/acpi_pcihp.c
@@ -0,0 +1,201 @@
+/*
+ * ACPI related functions for PCI hotplug drivers
+ *
+ * Copyright (C) 2006 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <kristen.c.accardi@intel.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+#include "pci_hotplug.h"
+
+#define METHOD_NAME__SUN "_SUN"
+#define METHOD_NAME__HPP "_HPP"
+#define METHOD_NAME_OSHP "OSHP"
+
+u8 * acpi_path_name( acpi_handle handle)
+{
+ acpi_status status;
+ static u8 path_name[ACPI_PATHNAME_MAX];
+ struct acpi_buffer ret_buf = { ACPI_PATHNAME_MAX, path_name };
+
+ memset(path_name, 0, sizeof (path_name));
+ status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
+
+ if (ACPI_FAILURE(status))
+ return NULL;
+ else
+ return path_name;
+}
+EXPORT_SYMBOL_GPL(acpi_path_name);
+
+static acpi_status
+acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
+{
+ acpi_status status;
+ u8 nui[4];
+ struct acpi_buffer ret_buf = { 0, NULL};
+ union acpi_object *ext_obj, *package;
+ u8 *path_name = acpi_path_name(handle);
+ int i, len = 0;
+
+ /* get _hpp */
+ status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
+ switch (status) {
+ case AE_BUFFER_OVERFLOW:
+ ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
+ if (!ret_buf.pointer) {
+ printk(KERN_ERR "%s:%s alloc for _HPP fail\n",
+ __FUNCTION__, path_name);
+ return AE_NO_MEMORY;
+ }
+ status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
+ NULL, &ret_buf);
+ if (ACPI_SUCCESS(status))
+ break;
+ default:
+ if (ACPI_FAILURE(status)) {
+ pr_debug("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
+ path_name, status);
+ return status;
+ }
+ }
+
+ ext_obj = (union acpi_object *) ret_buf.pointer;
+ if (ext_obj->type != ACPI_TYPE_PACKAGE) {
+ printk(KERN_ERR "%s:%s _HPP obj not a package\n", __FUNCTION__,
+ path_name);
+ status = AE_ERROR;
+ goto free_and_return;
+ }
+
+ len = ext_obj->package.count;
+ package = (union acpi_object *) ret_buf.pointer;
+ for ( i = 0; (i < len) || (i < 4); i++) {
+ ext_obj = (union acpi_object *) &package->package.elements[i];
+ switch (ext_obj->type) {
+ case ACPI_TYPE_INTEGER:
+ nui[i] = (u8)ext_obj->integer.value;
+ break;
+ default:
+ printk(KERN_ERR "%s:%s _HPP obj type incorrect\n",
+ __FUNCTION__, path_name);
+ status = AE_ERROR;
+ goto free_and_return;
+ }
+ }
+
+ hpp->cache_line_size = nui[0];
+ hpp->latency_timer = nui[1];
+ hpp->enable_serr = nui[2];
+ hpp->enable_perr = nui[3];
+
+ pr_debug(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
+ pr_debug(" _HPP: latency timer =0x%x\n", hpp->latency_timer);
+ pr_debug(" _HPP: enable SERR =0x%x\n", hpp->enable_serr);
+ pr_debug(" _HPP: enable PERR =0x%x\n", hpp->enable_perr);
+
+free_and_return:
+ kfree(ret_buf.pointer);
+ return status;
+}
+
+acpi_status acpi_run_oshp(acpi_handle handle)
+{
+ acpi_status status;
+ u8 *path_name = acpi_path_name(handle);
+
+ /* run OSHP */
+ status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR "%s:%s OSHP fails=0x%x\n", __FUNCTION__,
+ path_name, status);
+ } else {
+ pr_debug("%s:%s OSHP passes\n", __FUNCTION__, path_name);
+ }
+ return status;
+}
+EXPORT_SYMBOL_GPL(acpi_run_oshp);
+
+
+
+void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+ struct hotplug_params *hpp)
+{
+ acpi_status status = AE_NOT_FOUND;
+ struct pci_dev *pdev = dev;
+
+ /*
+ * _HPP settings apply to all child buses, until another _HPP is
+ * encountered. If we don't find an _HPP for the input pci dev,
+ * look for it in the parent device scope since that would apply to
+ * this pci dev. If we don't find any _HPP, use hardcoded defaults
+ */
+ while (pdev && (ACPI_FAILURE(status))) {
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
+ if (!handle)
+ break;
+ status = acpi_run_hpp(handle, hpp);
+ if (!(pdev->bus->parent))
+ break;
+ /* Check if a parent object supports _HPP */
+ pdev = pdev->bus->parent->self;
+ }
+}
+EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
+
+
+
+int is_root_bridge(acpi_handle handle)
+{
+ acpi_status status;
+ struct acpi_device_info *info;
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ int i;
+
+ status = acpi_get_object_info(handle, &buffer);
+ if (ACPI_SUCCESS(status)) {
+ info = buffer.pointer;
+ if ((info->valid & ACPI_VALID_HID) &&
+ !strcmp(PCI_ROOT_HID_STRING,
+ info->hardware_id.value)) {
+ acpi_os_free(buffer.pointer);
+ return 1;
+ }
+ if (info->valid & ACPI_VALID_CID) {
+ for (i=0; i < info->compatibility_id.count; i++) {
+ if (!strcmp(PCI_ROOT_HID_STRING,
+ info->compatibility_id.id[i].value)) {
+ acpi_os_free(buffer.pointer);
+ return 1;
+ }
+ }
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(is_root_bridge);
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/acpiphp_glue.c
+++ 2.6-git-gregkh/drivers/pci/hotplug/acpiphp_glue.c
@@ -1408,34 +1408,6 @@ void handle_hotplug_event_func(acpi_hand
}
}
-static int is_root_bridge(acpi_handle handle)
-{
- acpi_status status;
- struct acpi_device_info *info;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- int i;
-
- status = acpi_get_object_info(handle, &buffer);
- if (ACPI_SUCCESS(status)) {
- info = buffer.pointer;
- if ((info->valid & ACPI_VALID_HID) &&
- !strcmp(PCI_ROOT_HID_STRING,
- info->hardware_id.value)) {
- acpi_os_free(buffer.pointer);
- return 1;
- }
- if (info->valid & ACPI_VALID_CID) {
- for (i=0; i < info->compatibility_id.count; i++) {
- if (!strcmp(PCI_ROOT_HID_STRING,
- info->compatibility_id.id[i].value)) {
- acpi_os_free(buffer.pointer);
- return 1;
- }
- }
- }
- }
- return 0;
-}
static acpi_status
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/pci_hotplug.h
+++ 2.6-git-gregkh/drivers/pci/hotplug/pci_hotplug.h
@@ -176,5 +176,22 @@ extern int pci_hp_change_slot_info (stru
struct hotplug_slot_info *info);
extern struct subsystem pci_hotplug_slots_subsys;
+struct hotplug_params {
+ u8 cache_line_size;
+ u8 latency_timer;
+ u8 enable_serr;
+ u8 enable_perr;
+};
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+extern acpi_status acpi_run_oshp(acpi_handle handle);
+extern void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+ struct hotplug_params *hpp);
+extern u8 * acpi_path_name( acpi_handle handle);
+int is_root_bridge(acpi_handle handle);
+#endif
#endif
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehp.h
+++ 2.6-git-gregkh/drivers/pci/hotplug/pciehp.h
@@ -50,12 +50,6 @@ extern int pciehp_force;
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
-struct hotplug_params {
- u8 cache_line_size;
- u8 latency_timer;
- u8 enable_serr;
- u8 enable_perr;
-};
struct slot {
struct slot *next;
@@ -192,9 +186,6 @@ extern u8 pciehp_handle_power_fault (u8
/* pci functions */
extern int pciehp_configure_device (struct slot *p_slot);
extern int pciehp_unconfigure_device (struct slot *p_slot);
-extern int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp);
@@ -286,4 +277,14 @@ struct hpc_ops {
int (*check_lnk_status) (struct controller *ctrl);
};
+
+#ifdef CONFIG_ACPI
+#define pciehp_get_hp_hw_control_from_firmware(dev) \
+ pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+#define pciehp_get_hp_params_from_firmware(dev, hpp) \
+ acpi_get_hp_params_from_firmware(dev, hpp)
+#else
+#define pciehp_get_hp_hw_control_from_firmware(dev) 0
+#define acpi_get_hp_params_from_firmware(dev, hpp)
+#endif /* CONFIG_ACPI */
#endif /* _PCIEHP_H */
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehp_hpc.c
+++ 2.6-git-gregkh/drivers/pci/hotplug/pciehp_hpc.c
@@ -38,6 +38,9 @@
#include "../pci.h"
#include "pciehp.h"
+#ifdef CONFIG_ACPI
+#include <linux/pci-acpi.h>
+#endif
#ifdef DEBUG
#define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */
@@ -1236,6 +1239,72 @@ static struct hpc_ops pciehp_hpc_ops = {
.check_lnk_status = hpc_check_lnk_status,
};
+#ifdef CONFIG_ACPI
+int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
+{
+ acpi_status status;
+ acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+ struct pci_dev *pdev = dev;
+ struct pci_bus *parent;
+ u8 *path_name;
+
+ /*
+ * Per PCI firmware specification, we should run the ACPI _OSC
+ * method to get control of hotplug hardware before using it.
+ * If an _OSC is missing, we look for an OSHP to do the same thing.
+ * To handle different BIOS behavior, we look for _OSC and OSHP
+ * within the scope of the hotplug controller and its parents, upto
+ * the host bridge under which this controller exists.
+ */
+ while (!handle) {
+ /*
+ * This hotplug controller was not listed in the ACPI name
+ * space at all. Try to get acpi handle of parent pci bus.
+ */
+ if (!pdev || !pdev->bus->parent)
+ break;
+ parent = pdev->bus->parent;
+ dbg("Could not find %s in acpi namespace, trying parent\n",
+ pci_name(pdev));
+ if (!parent->self)
+ /* Parent must be a host bridge */
+ handle = acpi_get_pci_rootbridge_handle(
+ pci_domain_nr(parent),
+ parent->number);
+ else
+ handle = DEVICE_ACPI_HANDLE(
+ &(parent->self->dev));
+ pdev = parent->self;
+ }
+
+ while (handle) {
+ path_name = acpi_path_name(handle);
+ dbg("Trying to get hotplug control for %s \n", path_name);
+ status = pci_osc_control_set(handle,
+ OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
+ if (status == AE_NOT_FOUND)
+ status = acpi_run_oshp(handle);
+ if (ACPI_SUCCESS(status)) {
+ dbg("Gained control for hotplug HW for pci %s (%s)\n",
+ pci_name(dev), path_name);
+ return 0;
+ }
+ if (is_root_bridge(handle))
+ break;
+ chandle = handle;
+ status = acpi_get_parent(chandle, &handle);
+ if (ACPI_FAILURE(status))
+ break;
+ }
+
+ err("Cannot get control of hotplug hardware for pci %s\n",
+ pci_name(dev));
+ return -1;
+}
+#endif
+
+
+
int pcie_init(struct controller * ctrl, struct pcie_device *dev)
{
struct php_ctlr_state_s *php_ctlr, *p;
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehprm_acpi.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * PCIEHPRM ACPI: PHP Resource Manager for ACPI platform
- *
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <kristen.c.accardi@intel.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include "pciehp.h"
-
-#define METHOD_NAME__SUN "_SUN"
-#define METHOD_NAME__HPP "_HPP"
-#define METHOD_NAME_OSHP "OSHP"
-
-static u8 * acpi_path_name( acpi_handle handle)
-{
- acpi_status status;
- static u8 path_name[ACPI_PATHNAME_MAX];
- struct acpi_buffer ret_buf = { ACPI_PATHNAME_MAX, path_name };
-
- memset(path_name, 0, sizeof (path_name));
- status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
-
- if (ACPI_FAILURE(status))
- return NULL;
- else
- return path_name;
-}
-
-static acpi_status
-acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
-{
- acpi_status status;
- u8 nui[4];
- struct acpi_buffer ret_buf = { 0, NULL};
- union acpi_object *ext_obj, *package;
- u8 *path_name = acpi_path_name(handle);
- int i, len = 0;
-
- /* get _hpp */
- status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
- switch (status) {
- case AE_BUFFER_OVERFLOW:
- ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
- if (!ret_buf.pointer) {
- err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
- path_name);
- return AE_NO_MEMORY;
- }
- status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
- NULL, &ret_buf);
- if (ACPI_SUCCESS(status))
- break;
- default:
- if (ACPI_FAILURE(status)) {
- dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
- path_name, status);
- return status;
- }
- }
-
- ext_obj = (union acpi_object *) ret_buf.pointer;
- if (ext_obj->type != ACPI_TYPE_PACKAGE) {
- err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
- path_name);
- status = AE_ERROR;
- goto free_and_return;
- }
-
- len = ext_obj->package.count;
- package = (union acpi_object *) ret_buf.pointer;
- for ( i = 0; (i < len) || (i < 4); i++) {
- ext_obj = (union acpi_object *) &package->package.elements[i];
- switch (ext_obj->type) {
- case ACPI_TYPE_INTEGER:
- nui[i] = (u8)ext_obj->integer.value;
- break;
- default:
- err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
- path_name);
- status = AE_ERROR;
- goto free_and_return;
- }
- }
-
- hpp->cache_line_size = nui[0];
- hpp->latency_timer = nui[1];
- hpp->enable_serr = nui[2];
- hpp->enable_perr = nui[3];
-
- dbg(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
- dbg(" _HPP: latency timer =0x%x\n", hpp->latency_timer);
- dbg(" _HPP: enable SERR =0x%x\n", hpp->enable_serr);
- dbg(" _HPP: enable PERR =0x%x\n", hpp->enable_perr);
-
-free_and_return:
- kfree(ret_buf.pointer);
- return status;
-}
-
-static acpi_status acpi_run_oshp(acpi_handle handle)
-{
- acpi_status status;
- u8 *path_name = acpi_path_name(handle);
-
- /* run OSHP */
- status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
- if (ACPI_FAILURE(status)) {
- dbg("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
- status);
- } else {
- dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
- }
- return status;
-}
-
-static int is_root_bridge(acpi_handle handle)
-{
- acpi_status status;
- struct acpi_device_info *info;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- int i;
-
- status = acpi_get_object_info(handle, &buffer);
- if (ACPI_SUCCESS(status)) {
- info = buffer.pointer;
- if ((info->valid & ACPI_VALID_HID) &&
- !strcmp(PCI_ROOT_HID_STRING,
- info->hardware_id.value)) {
- acpi_os_free(buffer.pointer);
- return 1;
- }
- if (info->valid & ACPI_VALID_CID) {
- for (i=0; i < info->compatibility_id.count; i++) {
- if (!strcmp(PCI_ROOT_HID_STRING,
- info->compatibility_id.id[i].value)) {
- acpi_os_free(buffer.pointer);
- return 1;
- }
- }
- }
- }
- return 0;
-}
-
-int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- acpi_status status;
- acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
- struct pci_dev *pdev = dev;
- struct pci_bus *parent;
- u8 *path_name;
-
- /*
- * Per PCI firmware specification, we should run the ACPI _OSC
- * method to get control of hotplug hardware before using it.
- * If an _OSC is missing, we look for an OSHP to do the same thing.
- * To handle different BIOS behavior, we look for _OSC and OSHP
- * within the scope of the hotplug controller and its parents, upto
- * the host bridge under which this controller exists.
- */
- while (!handle) {
- /*
- * This hotplug controller was not listed in the ACPI name
- * space at all. Try to get acpi handle of parent pci bus.
- */
- if (!pdev || !pdev->bus->parent)
- break;
- parent = pdev->bus->parent;
- dbg("Could not find %s in acpi namespace, trying parent\n",
- pci_name(pdev));
- if (!parent->self)
- /* Parent must be a host bridge */
- handle = acpi_get_pci_rootbridge_handle(
- pci_domain_nr(parent),
- parent->number);
- else
- handle = DEVICE_ACPI_HANDLE(
- &(parent->self->dev));
- pdev = parent->self;
- }
-
- while (handle) {
- path_name = acpi_path_name(handle);
- dbg("Trying to get hotplug control for %s \n", path_name);
- status = pci_osc_control_set(handle,
- OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
- if (status == AE_NOT_FOUND)
- status = acpi_run_oshp(handle);
- if (ACPI_SUCCESS(status)) {
- dbg("Gained control for hotplug HW for pci %s (%s)\n",
- pci_name(dev), path_name);
- return 0;
- }
- if (is_root_bridge(handle))
- break;
- chandle = handle;
- status = acpi_get_parent(chandle, &handle);
- if (ACPI_FAILURE(status))
- break;
- }
-
- err("Cannot get control of hotplug hardware for pci %s\n",
- pci_name(dev));
- return -1;
-}
-
-void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
-{
- acpi_status status = AE_NOT_FOUND;
- struct pci_dev *pdev = dev;
-
- /*
- * _HPP settings apply to all child buses, until another _HPP is
- * encountered. If we don't find an _HPP for the input pci dev,
- * look for it in the parent device scope since that would apply to
- * this pci dev. If we don't find any _HPP, use hardcoded defaults
- */
- while (pdev && (ACPI_FAILURE(status))) {
- acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
- if (!handle)
- break;
- status = acpi_run_hpp(handle, hpp);
- if (!(pdev->bus->parent))
- break;
- /* Check if a parent object supports _HPP */
- pdev = pdev->bus->parent->self;
- }
-}
-
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/pciehprm_nonacpi.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * PCIEHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include "pciehp.h"
-
-void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
-{
- return;
-}
-
-int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- return 0;
-}
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchp.h
+++ 2.6-git-gregkh/drivers/pci/hotplug/shpchp.h
@@ -106,12 +106,6 @@ struct controller {
volatile int cmd_busy;
};
-struct hotplug_params {
- u8 cache_line_size;
- u8 latency_timer;
- u8 enable_serr;
- u8 enable_perr;
-};
/* Define AMD SHPC ID */
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
@@ -193,15 +187,24 @@ extern u8 shpchp_handle_power_fault(u8 h
extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
extern int shpchp_configure_device(struct slot *p_slot);
extern int shpchp_unconfigure_device(struct slot *p_slot);
-extern void get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp);
-extern int shpchprm_get_physical_slot_number(struct controller *ctrl,
- u32 *sun, u8 busnum, u8 devnum);
extern void shpchp_remove_ctrl_files(struct controller *ctrl);
extern void cleanup_slots(struct controller *ctrl);
extern void queue_pushbutton_work(void *data);
+
+#ifdef CONFIG_ACPI
+#define get_hp_params_from_firmware(dev, hpp) \
+ acpi_get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(pdev) \
+ do { \
+ if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+ acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+ } while (0)
+#else
+#define get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(dev)
+#endif
+
struct ctrl_reg {
volatile u32 base_offset;
volatile u32 slot_avail1;
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchp_core.c
+++ 2.6-git-gregkh/drivers/pci/hotplug/shpchp_core.c
@@ -104,6 +104,23 @@ static void make_slot_name(struct slot *
slot->bus, slot->number);
}
+
+
+
+static int
+shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
+ u8 busnum, u8 devnum)
+{
+ int offset = devnum - ctrl->slot_device_offset;
+
+ dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
+ ctrl->slot_num_inc, offset);
+ *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
+ return 0;
+}
+
+
+
static int init_slots(struct controller *ctrl)
{
struct slot *slot;
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchprm_acpi.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * SHPCHPRM ACPI: PHP Resource Manager for ACPI platform
- *
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <kristen.c.accardi@intel.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <acpi/acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include "shpchp.h"
-
-#define METHOD_NAME__SUN "_SUN"
-#define METHOD_NAME__HPP "_HPP"
-#define METHOD_NAME_OSHP "OSHP"
-
-static u8 * acpi_path_name( acpi_handle handle)
-{
- acpi_status status;
- static u8 path_name[ACPI_PATHNAME_MAX];
- struct acpi_buffer ret_buf = { ACPI_PATHNAME_MAX, path_name };
-
- memset(path_name, 0, sizeof (path_name));
- status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
-
- if (ACPI_FAILURE(status))
- return NULL;
- else
- return path_name;
-}
-
-static acpi_status
-acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
-{
- acpi_status status;
- u8 nui[4];
- struct acpi_buffer ret_buf = { 0, NULL};
- union acpi_object *ext_obj, *package;
- u8 *path_name = acpi_path_name(handle);
- int i, len = 0;
-
- /* get _hpp */
- status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
- switch (status) {
- case AE_BUFFER_OVERFLOW:
- ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
- if (!ret_buf.pointer) {
- err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
- path_name);
- return AE_NO_MEMORY;
- }
- status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
- NULL, &ret_buf);
- if (ACPI_SUCCESS(status))
- break;
- default:
- if (ACPI_FAILURE(status)) {
- dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
- path_name, status);
- return status;
- }
- }
-
- ext_obj = (union acpi_object *) ret_buf.pointer;
- if (ext_obj->type != ACPI_TYPE_PACKAGE) {
- err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
- path_name);
- status = AE_ERROR;
- goto free_and_return;
- }
-
- len = ext_obj->package.count;
- package = (union acpi_object *) ret_buf.pointer;
- for ( i = 0; (i < len) || (i < 4); i++) {
- ext_obj = (union acpi_object *) &package->package.elements[i];
- switch (ext_obj->type) {
- case ACPI_TYPE_INTEGER:
- nui[i] = (u8)ext_obj->integer.value;
- break;
- default:
- err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
- path_name);
- status = AE_ERROR;
- goto free_and_return;
- }
- }
-
- hpp->cache_line_size = nui[0];
- hpp->latency_timer = nui[1];
- hpp->enable_serr = nui[2];
- hpp->enable_perr = nui[3];
-
- dbg(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
- dbg(" _HPP: latency timer =0x%x\n", hpp->latency_timer);
- dbg(" _HPP: enable SERR =0x%x\n", hpp->enable_serr);
- dbg(" _HPP: enable PERR =0x%x\n", hpp->enable_perr);
-
-free_and_return:
- kfree(ret_buf.pointer);
- return status;
-}
-
-static void acpi_run_oshp(acpi_handle handle)
-{
- acpi_status status;
- u8 *path_name = acpi_path_name(handle);
-
- /* run OSHP */
- status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
- if (ACPI_FAILURE(status)) {
- err("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
- status);
- } else {
- dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
- }
-}
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
- int offset = devnum - ctrl->slot_device_offset;
-
- dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
- *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
- return 0;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- /*
- * OSHP is an optional ACPI firmware control method. If present,
- * we need to run it to inform BIOS that we will control SHPC
- * hardware from now on.
- */
- acpi_handle handle = DEVICE_ACPI_HANDLE(&(dev->dev));
- if (!handle)
- return;
- acpi_run_oshp(handle);
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
-{
- acpi_status status = AE_NOT_FOUND;
- struct pci_dev *pdev = dev;
-
- /*
- * _HPP settings apply to all child buses, until another _HPP is
- * encountered. If we don't find an _HPP for the input pci dev,
- * look for it in the parent device scope since that would apply to
- * this pci dev. If we don't find any _HPP, use hardcoded defaults
- */
- while (pdev && (ACPI_FAILURE(status))) {
- acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
- if (!handle)
- break;
- status = acpi_run_hpp(handle, hpp);
- if (!(pdev->bus->parent))
- break;
- /* Check if a parent object supports _HPP */
- pdev = pdev->bus->parent->self;
- }
-}
-
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchprm_legacy.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include "shpchp.h"
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
- int offset = devnum - ctrl->slot_device_offset;
-
- *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
- return 0;
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
-{
- return;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- return;
-}
-
--- 2.6-git-gregkh.orig/drivers/pci/hotplug/shpchprm_nonacpi.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "shpchp.h"
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
- int offset = devnum - ctrl->slot_device_offset;
-
- dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
- *sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
- return 0;
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
-{
- return;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- return;
-}
next reply other threads:[~2006-03-01 0:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-01 0:46 Kristen Accardi [this message]
2006-03-01 0:53 ` [patch] pci hotplug: add common acpi functions to core Greg KH
2006-03-01 2:01 ` Randy.Dunlap
2006-03-01 2:03 ` [Pcihpd-discuss] " Kenji Kaneshige
2006-03-01 22:56 ` Kristen Accardi
2006-03-01 2:42 ` Kenji Kaneshige
2006-03-01 22:42 ` Kristen Accardi
2006-03-02 3:18 ` Kenji Kaneshige
2006-03-02 23:38 ` Kristen Accardi
2006-03-03 18:16 ` [patch] pci hotplug: add common acpi functions to core v2 Kristen Accardi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1141174017.28842.6.camel@whizzy \
--to=kristen.c.accardi@intel.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pcihpd-discuss@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.