From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 1/4] libata: convert dev->id to pointer
Date: Wed, 1 Mar 2006 16:09:35 +0900 [thread overview]
Message-ID: <11411969753100-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11411969752304-git-send-email-htejun@gmail.com>
Convert dev->id from array to pointer. This is to accomodate
revalidation. During revalidation, both old and new IDENTIFY pages
should be accessible and single ->id array doesn't cut it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 20 +++++++++++++++++---
include/linux/libata.h | 2 +-
2 files changed, 18 insertions(+), 4 deletions(-)
6ae458d0e6b0f04d5092e79a8e45a4c187037d27
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 436520e..a630cda 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -907,7 +907,7 @@ unsigned int ata_pio_need_iordy(const st
* @dev: target device
* @p_class: pointer to class of the target device (may be changed)
* @post_reset: is this read ID post-reset?
- * @id: buffer to fill IDENTIFY page into
+ * @p_id: read IDENTIFY page (newly allocated)
*
* Read ID data from the specified device. ATA_CMD_ID_ATA is
* performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
@@ -922,12 +922,13 @@ unsigned int ata_pio_need_iordy(const st
* 0 on success, -errno otherwise.
*/
static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
- unsigned int *p_class, int post_reset, u16 *id)
+ unsigned int *p_class, int post_reset, u16 **p_id)
{
unsigned int class = *p_class;
unsigned int using_edd;
struct ata_taskfile tf;
unsigned int err_mask = 0;
+ u16 *id;
const char *reason;
int rc;
@@ -941,6 +942,13 @@ static int ata_dev_read_id(struct ata_po
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
+ id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL);
+ if (id == NULL) {
+ rc = -ENOMEM;
+ reason = "out of memory";
+ goto err_out;
+ }
+
retry:
ata_tf_init(ap, &tf, dev->devno);
@@ -1031,11 +1039,13 @@ static int ata_dev_read_id(struct ata_po
}
*p_class = class;
+ *p_id = id;
return 0;
err_out:
printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n",
ap->id, dev->devno, reason);
+ kfree(id);
return rc;
}
@@ -1075,7 +1085,8 @@ static void ata_dev_identify(struct ata_
DPRINTK("ENTER, host %u, dev %u\n", ap->id, device);
- rc = ata_dev_read_id(ap, dev, &dev->class, 1, dev->id);
+ WARN_ON(dev->id != NULL);
+ rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id);
if (rc)
goto err_out;
@@ -4728,11 +4739,14 @@ void ata_host_set_remove(struct ata_host
int ata_scsi_release(struct Scsi_Host *host)
{
struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
+ int i;
DPRINTK("ENTER\n");
ap->ops->port_disable(ap);
ata_host_remove(ap, 0);
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ kfree(ap->device[i].id);
DPRINTK("EXIT\n");
return 1;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 66b6847..68666b9 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -339,7 +339,7 @@ struct ata_device {
unsigned long flags; /* ATA_DFLAG_xxx */
unsigned int class; /* ATA_DEV_xxx */
unsigned int devno; /* 0 or 1 */
- u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
+ u16 *id; /* IDENTIFY xxx DEVICE data */
u8 pio_mode;
u8 dma_mode;
u8 xfer_mode;
--
1.2.1
next prev parent reply other threads:[~2006-03-01 7:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-01 7:09 [PATCHSET] libata: reorganize ata_dev_identify(), take 3 Tejun Heo
2006-03-01 7:09 ` [PATCH 2/4] libata: separate out ata_dev_configure() Tejun Heo
2006-03-01 7:09 ` Tejun Heo [this message]
2006-03-03 22:31 ` [PATCH 1/4] libata: convert dev->id to pointer Jeff Garzik
2006-03-01 7:09 ` [PATCH 4/4] libata: reorganize ata_bus_probe() Tejun Heo
2006-03-01 7:09 ` [PATCH 3/4] libata: fold ata_dev_config() into ata_dev_configure() Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11411969753100-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.