From: Mike Galbraith <efault@gmx.de>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>
Subject: 2.6.16-rc5-mm3 oopses on modprobe p4_clockmod
Date: Wed, 08 Mar 2006 10:11:47 +0100 [thread overview]
Message-ID: <1141809107.7841.5.camel@homer> (raw)
Greetings,
Subject says it all. This oops is from 100% virgin mm3 source, no
grubby fingerprints of mine, not even a smudge ;-)
-Mike
cpufreq-core: trying to register driver p4-clockmod
cpufreq-core: adding CPU 0
p4-clockmod: has errata -- disabling frequencies lower than 2ghz
speedstep-lib: x86: f, model: 2
speedstep-lib: ebx value is 9, x86_mask is 9
speedstep-lib: P4 - MSR_EBC_FREQUENCY_ID: 0xf12000f 0x0
speedstep-lib: P4 - FSB 200000 kHz; Multiplier 15; Speed 3000000 kHz
freq-table: setting show_table for cpu 0 to f8a65720
freq-table: table entry 0 is invalid, skipping
freq-table: table entry 1 is invalid, skipping
freq-table: table entry 2 is invalid, skipping
freq-table: table entry 3 is invalid, skipping
freq-table: table entry 4 is invalid, skipping
freq-table: table entry 5 is invalid, skipping
freq-table: table entry 6 is invalid, skipping
freq-table: table entry 7 is invalid, skipping
freq-table: table entry 8 is invalid, skipping
cpufreq-core: initialization failed
cpufreq-core: adding CPU 1
p4-clockmod: has errata -- disabling frequencies lower than 2ghz
speedstep-lib: x86: f, model: 2
speedstep-lib: ebx value is 9, x86_mask is 9
speedstep-lib: P4 - MSR_EBC_FREQUENCY_ID: 0xf12000f 0x0
speedstep-lib: P4 - FSB 200000 kHz; Multiplier 15; Speed 3000000 kHz
freq-table: setting show_table for cpu 1 to f8a65720
freq-table: table entry 0 is invalid, skipping
freq-table: table entry 1: 375000 kHz, 1 index
freq-table: table entry 2: 750000 kHz, 2 index
freq-table: table entry 3: 1125000 kHz, 3 index
freq-table: table entry 4: 1500000 kHz, 4 index
freq-table: table entry 5: 1875000 kHz, 5 index
freq-table: table entry 6: 2250000 kHz, 6 index
freq-table: table entry 7: 2625000 kHz, 7 index
freq-table: table entry 8: 3000000 kHz, 8 index
cpufreq-core: CPU already managed, adding link
cpufreq-core: setting new policy for CPU 1: 375000 - 3000000 kHz
freq-table: request for verification of policy (375000 - 3000000 kHz) for cpu 1
freq-table: verification lead to (375000 - 3000000 kHz) for cpu 1
freq-table: request for verification of policy (375000 - 3000000 kHz) for cpu 1
freq-table: verification lead to (375000 - 3000000 kHz) for cpu 1
cpufreq-core: new min and max freqs are 375000 - 3000000 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 1, event 1
performance: setting to 3000000 kHz because of event 1
cpufreq-core: target for CPU 1: 3000000 kHz, relation 1
freq-table: request for target 3000000 kHz (relation: 1) for cpu 1
freq-table: target is 8 (3000000 kHz, 8)
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 1, event 3
performance: setting to 3000000 kHz because of event 3
cpufreq-core: target for CPU 1: 3000000 kHz, relation 1
freq-table: request for target 3000000 kHz (relation: 1) for cpu 1
freq-table: target is 8 (3000000 kHz, 8)
cpufreq-core: initialization complete
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c1540de3
*pde = 00000000
Oops: 0002 [#1]
PREEMPT SMP
last sysfs file: /devices/pci0000:00/0000:00:1e.0/0000:02:09.0/subsystem_device
Modules linked in: p4_clockmod xt_pkttype ipt_LOG xt_limit speedstep_lib freq_table button snd_pcm_oss snd_mixer_oss battery snd_seq snd_seq_device ac edd tda9887 saa7134 ir_kbd_i2c snd_intel8x0 snd_ac97_codec snd_ac97_bus bt878 snd_pcm ohci1394 ieee1394 snd_timer prism54 snd soundcore snd_page_alloc i2c_i801 ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle iptable_nat ip_nat iptable_filter ip6table_mangle ip_conntrack ip_tables ip6table_filter ip6_tables x_tables tuner bttv video_buf firmware_class ir_common btcx_risc tveeprom nls_iso8859_1 nls_cp437 nls_utf8 sd_mod fan thermal processor
CPU: 1
EIP: 0060:[<c1540de3>] Not tainted VLI
EFLAGS: 00010246 (2.6.16-rc5-mm3 #9)
EIP is at register_cpu_notifier+0x0/0x11
eax: c14d0b50 ebx: 00000000 ecx: c15d5f40 edx: c15d5f40
esi: f8a656c4 edi: f8ae9c64 ebp: f0da0e88 esp: f0da0e6c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 7812, threadinfo=f0da0000 task=f40a7000)
Stack: <0>c12c9bb4 00000001 c13f3d93 c13f3da0 f8a656c4 f8a65780 f40a2800 f0da0e98
f8cdb03a c102a025 f8a65780 f0da0fb4 c1035296 f8a657c8 c13f0cde f8a6578c
000027fe 00000000 f8ae987c f0da0ed8 00000024 00000430 f8d08a80 f8a657c8
Call Trace:
<c1003e93> show_stack_log_lvl+0xa9/0xe3 <c100406d> show_registers+0x1a0/0x236
<c1004381> die+0x12f/0x2ae <c101390f> do_page_fault+0x353/0x5fa
<c1003847> error_code+0x4f/0x54 <f8cdb03a> cpufreq_p4_init+0x3a/0x4e [p4_clockmod]
<c1035296> sys_init_module+0x115/0x1a1e <c1002cdf> sysenter_past_esp+0x54/0x75
Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 1b db 25 22 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
next reply other threads:[~2006-03-08 9:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-08 9:11 Mike Galbraith [this message]
2006-03-08 9:23 ` 2.6.16-rc5-mm3 oopses on modprobe p4_clockmod Andrew Morton
2006-03-08 10:20 ` Mike Galbraith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1141809107.7841.5.camel@homer \
--to=efault@gmx.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.