[PATCH 2/4] libata: use ata_dev_disable() in ata_bus_probe()

[Tejun Heo <htejun@gmail.com>]

We may or may not disable a device after ata_dev_configure() fails.
Kill 'not supported, ignoring' message in ata_dev_configure() and use
ata_dev_disable() in ata_bus_probe().

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/libata-core.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

54e2f80b5190b3f94779c06cbfe722b4bfe9204a
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 92c7c53..b7595bf 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1373,8 +1373,6 @@ static int ata_dev_configure(struct ata_
 	return 0;
 
 err_out_nosup:
-	printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n",
-	       ap->id, dev->devno);
 	DPRINTK("EXIT, err\n");
 	return rc;
 }
@@ -1443,7 +1441,7 @@ static int ata_bus_probe(struct ata_port
 		}
 
 		if (ata_dev_configure(ap, dev, 1)) {
-			dev->class++;	/* disable device */
+			ata_dev_disable(ap, dev);
 			continue;
 		}
 
-- 
1.2.4