From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregkh@suse.de (Greg KH) Date: Thu, 23 Mar 2006 22:43:50 +0000 Subject: [lm-sensors] [PATCH 11/36] i2c: scx200_acb minimal documentation Message-Id: <11431538301689-git-send-email-gregkh@suse.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org scx200_acb: Minimal documentation update Signed-off-by: Ben Gardner Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/busses/scx200_acb | 5 +++-- drivers/i2c/busses/Kconfig | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) a417bbd33b2ed7a3b2bc78cbadb820079d453328 diff --git a/Documentation/i2c/busses/scx200_acb b/Documentation/i2c/busses/scx200_acb index 08c8cd1..f50e699 100644 --- a/Documentation/i2c/busses/scx200_acb +++ b/Documentation/i2c/busses/scx200_acb @@ -6,9 +6,10 @@ Module Parameters ----------------- * base: int - Base addresses for the ACCESS.bus controllers + Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices Description ----------- -Enable the use of the ACCESS.bus controllers of a SCx200 processor. +Enable the use of the ACCESS.bus controller on the Geode SCx200 and +SC1100 processors and the CS5535 and CS5536 Geode companion devices. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ff92735..1a3bf42 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -389,10 +389,11 @@ config SCx200_I2C_SDA also be specified with a module parameter. config SCx200_ACB - tristate "NatSemi SCx200 ACCESS.bus" + tristate "Geode ACCESS.bus support" depends on I2C && PCI help - Enable the use of the ACCESS.bus controllers of a SCx200 processor. + Enable the use of the ACCESS.bus controllers on the Geode SCx200 and + SC1100 processors and the CS5535 and CS5536 Geode companion devices. If you don't know what to do here, say N. -- 1.2.4