From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregkh@suse.de (Greg KH) Date: Thu, 23 Mar 2006 22:43:50 +0000 Subject: [lm-sensors] [PATCH 12/36] I2C: fix sx200_acb build on other arches Message-Id: <1143153830454-git-send-email-gregkh@suse.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org scx200_acb is only useful on a few Geode-based systems, and won't compile on non-x86 systems due to the lack of asm/msr.h, as reported by Andrew Morton. Thus, we should make that driver depend on X86. Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) cdf263f1c59cad9b1567e759890b9be044972856 diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 1a3bf42..7d2705a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -390,7 +390,7 @@ config SCx200_I2C_SDA config SCx200_ACB tristate "Geode ACCESS.bus support" - depends on I2C && PCI + depends on X86_32 && I2C && PCI help Enable the use of the ACCESS.bus controllers on the Geode SCx200 and SC1100 processors and the CS5535 and CS5536 Geode companion devices. -- 1.2.4