* [PATCH 02/14] libata: ata_dev_revalidate() printk update
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 03/14] libata: ATA_FLAG_IN_EH is not used, kill it Tejun Heo
` (13 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
Make sure ata_dev_revalidate() complains on failures and kill
revalidation failure message printed from ata_dev_set_mode().
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 23 ++++++++++-------------
1 files changed, 10 insertions(+), 13 deletions(-)
48633a90b26ada7104a8e320636f20f642ee2de4
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 93f8bce..402c0e4 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1972,12 +1972,8 @@ static int ata_dev_set_mode(struct ata_p
}
rc = ata_dev_revalidate(ap, dev, 0);
- if (rc) {
- printk(KERN_ERR
- "ata%u: failed to revalidate after set xfermode\n",
- ap->id);
+ if (rc)
return rc;
- }
DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
dev->xfer_shift, (int)dev->xfer_mode);
@@ -2775,15 +2771,14 @@ static int ata_dev_same_device(struct at
int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev,
int post_reset)
{
- unsigned int class;
- u16 *id;
+ unsigned int class = dev->class;
+ u16 *id = NULL;
int rc;
- if (!ata_dev_enabled(dev))
- return -ENODEV;
-
- class = dev->class;
- id = NULL;
+ if (!ata_dev_enabled(dev)) {
+ rc = -ENODEV;
+ goto fail;
+ }
/* allocate & read ID data */
rc = ata_dev_read_id(ap, dev, &class, post_reset, &id);
@@ -2800,7 +2795,9 @@ int ata_dev_revalidate(struct ata_port *
dev->id = id;
/* configure device according to the new ID */
- return ata_dev_configure(ap, dev, 0);
+ rc = ata_dev_configure(ap, dev, 0);
+ if (rc == 0)
+ return 0;
fail:
printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n",
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 03/14] libata: ATA_FLAG_IN_EH is not used, kill it
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
2006-04-01 10:48 ` [PATCH 02/14] libata: ata_dev_revalidate() printk update Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 01/14] libata: report device number when PIO fails Tejun Heo
` (12 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
Kill unused flag ATA_FLAG_IN_EH.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-scsi.c | 17 ++++-------------
include/linux/libata.h | 1 -
2 files changed, 4 insertions(+), 14 deletions(-)
2b41377fa3c3134fdce3e2366f16c6df4e27d3df
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index c1a4b29..bcbf71e 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -779,20 +779,15 @@ enum scsi_eh_timer_return ata_scsi_timed
int ata_scsi_error(struct Scsi_Host *host)
{
- struct ata_port *ap;
- unsigned long flags;
+ struct ata_port *ap = (struct ata_port *)&host->hostdata[0];
DPRINTK("ENTER\n");
- ap = (struct ata_port *) &host->hostdata[0];
+ /* synchronize with IRQ handler and port task */
+ spin_unlock_wait(&ap->host_set->lock);
+ ata_port_flush_task(ap);
- spin_lock_irqsave(&ap->host_set->lock, flags);
- WARN_ON(ap->flags & ATA_FLAG_IN_EH);
- ap->flags |= ATA_FLAG_IN_EH;
WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- ata_port_flush_task(ap);
ap->ops->eng_timeout(ap);
@@ -800,10 +795,6 @@ int ata_scsi_error(struct Scsi_Host *hos
scsi_eh_flush_done_q(&ap->eh_done_q);
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ap->flags &= ~ATA_FLAG_IN_EH;
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
DPRINTK("EXIT\n");
return 0;
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c246a15..036b737 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -152,7 +152,6 @@ enum {
ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */
ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* Flush port task */
- ATA_FLAG_IN_EH = (1 << 16), /* EH in progress */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 01/14] libata: report device number when PIO fails
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
2006-04-01 10:48 ` [PATCH 02/14] libata: ata_dev_revalidate() printk update Tejun Heo
2006-04-01 10:48 ` [PATCH 03/14] libata: ATA_FLAG_IN_EH is not used, kill it Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 09/14] libata: always generate sense if qc->err_mask is non-zero Tejun Heo
` (11 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
Report device number on PIO failure.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
75ac0de9ac24614a2a75d80cb7f5bc1e7dc509ba
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 0d72792..93f8bce 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3898,7 +3898,8 @@ static void ata_pio_error(struct ata_por
WARN_ON(qc == NULL);
if (qc->tf.command != ATA_CMD_PACKET)
- printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
+ printk(KERN_WARNING "ata%u: dev %u PIO error\n",
+ ap->id, qc->dev->devno);
/* make sure qc->err_mask is available to
* know what's wrong and recover
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 09/14] libata: always generate sense if qc->err_mask is non-zero
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (2 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 01/14] libata: report device number when PIO fails Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 20:02 ` Jeff Garzik
2006-04-01 10:48 ` [PATCH 05/14] libata: clear only affected flags during ata_dev_configure() Tejun Heo
` (10 subsequent siblings)
14 siblings, 1 reply; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
Current sense generation code does not generate sense error if status
register value doesn't indicate error condition. However, LLDD's may
indicate errors which 't show up in status register. Completing such
qc's without generating sense results in successful completion of
failed commands.
Invoke ata_to_sense_error() regardless of status register if
qc->err_mask is not zero such that ata_to_sense_error() generates
default sense error.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-scsi.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
4b4b53a7eed5541587578c6226b72e766b12ec4b
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 234e1ca..ec628ce 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -555,7 +555,8 @@ void ata_gen_ata_desc_sense(struct ata_q
* Use ata_to_sense_error() to map status register bits
* onto sense key, asc & ascq.
*/
- if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ if (qc->err_mask ||
+ tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
&sb[1], &sb[2], &sb[3]);
sb[1] &= 0x0f;
@@ -630,7 +631,8 @@ void ata_gen_fixed_sense(struct ata_queu
* Use ata_to_sense_error() to map status register bits
* onto sense key, asc & ascq.
*/
- if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ if (qc->err_mask ||
+ tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
&sb[2], &sb[12], &sb[13]);
sb[2] &= 0x0f;
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 09/14] libata: always generate sense if qc->err_mask is non-zero
2006-04-01 10:48 ` [PATCH 09/14] libata: always generate sense if qc->err_mask is non-zero Tejun Heo
@ 2006-04-01 20:02 ` Jeff Garzik
0 siblings, 0 replies; 19+ messages in thread
From: Jeff Garzik @ 2006-04-01 20:02 UTC (permalink / raw)
To: Tejun Heo; +Cc: alan, albertcc, linux-ide
Tejun Heo wrote:
> Current sense generation code does not generate sense error if status
> register value doesn't indicate error condition. However, LLDD's may
> indicate errors which 't show up in status register. Completing such
> qc's without generating sense results in successful completion of
> failed commands.
>
> Invoke ata_to_sense_error() regardless of status register if
> qc->err_mask is not zero such that ata_to_sense_error() generates
> default sense error.
>
> Signed-off-by: Tejun Heo <htejun@gmail.com>
ACK patches 5-9
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 05/14] libata: clear only affected flags during ata_dev_configure()
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (3 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 09/14] libata: always generate sense if qc->err_mask is non-zero Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 07/14] libata: add ATA_QCFLAG_IO Tejun Heo
` (9 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
ata_dev_configure() should not clear dynamic device flags determined
elsewhere. Only mask out ATA_DFLAG_CFG_MASK before configuring.
Without this patch, ATA_DFLAG_PIO gets turned off during revalidation
making PIO mode unuseable.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
b5318e739bed15eb68a16b4d61bcd7d7c21ea8fa
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 0df994d..0bc81c3 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1241,7 +1241,7 @@ static int ata_dev_configure(struct ata_
id[84], id[85], id[86], id[87], id[88]);
/* initialize to-be-configured parameters */
- dev->flags = 0;
+ dev->flags &= ~ATA_DFLAG_CFG_MASK;
dev->max_sectors = 0;
dev->cdb_len = 0;
dev->n_sectors = 0;
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 07/14] libata: add ATA_QCFLAG_IO
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (4 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 05/14] libata: clear only affected flags during ata_dev_configure() Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 08/14] libata: pass qc around intead of ap during PIO Tejun Heo
` (8 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
Add a new qc flag ATA_QCFLAG_IO. This flag gets set for normal IO
commands originating from SCSI midlayer. This information will be
used by EH to determine transfer speed reconfiguration.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-scsi.c | 1 +
include/linux/libata.h | 3 ++-
2 files changed, 3 insertions(+), 1 deletions(-)
15c24fd9b6d0f94db93b29f21b9d96efadc6220a
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 096bdff..234e1ca 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1188,6 +1188,7 @@ static unsigned int ata_scsi_rw_xlat(str
u64 block;
u32 n_block;
+ qc->flags |= ATA_QCFLAG_IO;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 9f942d4..1f9e6ea 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -161,7 +161,8 @@ enum {
ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
- ATA_QCFLAG_EH_SCHEDULED = (1 << 3), /* EH scheduled */
+ ATA_QCFLAG_IO = (1 << 3), /* standard IO command */
+ ATA_QCFLAG_EH_SCHEDULED = (1 << 4), /* EH scheduled */
/* host set flags */
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 08/14] libata: pass qc around intead of ap during PIO
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (5 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 07/14] libata: add ATA_QCFLAG_IO Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 06/14] libata: clear ATA_DFLAG_PIO before setting it Tejun Heo
` (7 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
The current code passes pointer to ap around and repeatedly performs
ata_qc_from_tag() to access the ongoing qc. This is unnatural and
makes EH synchronization cumbersome. Make PIO codes deal with qc
instead of ap.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 71 ++++++++++++++++----------------------------
1 files changed, 26 insertions(+), 45 deletions(-)
2a820c9abd25983f2776412030a5ff67f842590e
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index fe66e04..ab7a654 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3405,7 +3405,7 @@ void ata_poll_qc_complete(struct ata_que
/**
* ata_pio_poll - poll using PIO, depending on current state
- * @ap: the target ata_port
+ * @qc: qc in progress
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -3413,17 +3413,13 @@ void ata_poll_qc_complete(struct ata_que
* RETURNS:
* timeout value to use
*/
-
-static unsigned long ata_pio_poll(struct ata_port *ap)
+static unsigned long ata_pio_poll(struct ata_queued_cmd *qc)
{
- struct ata_queued_cmd *qc;
+ struct ata_port *ap = qc->ap;
u8 status;
unsigned int poll_state = HSM_ST_UNKNOWN;
unsigned int reg_state = HSM_ST_UNKNOWN;
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
-
switch (ap->hsm_task_state) {
case HSM_ST:
case HSM_ST_POLL:
@@ -3457,7 +3453,7 @@ static unsigned long ata_pio_poll(struct
/**
* ata_pio_complete - check if drive is busy or idle
- * @ap: the target ata_port
+ * @qc: qc to complete
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -3465,10 +3461,9 @@ static unsigned long ata_pio_poll(struct
* RETURNS:
* Non-zero if qc completed, zero otherwise.
*/
-
-static int ata_pio_complete (struct ata_port *ap)
+static int ata_pio_complete(struct ata_queued_cmd *qc)
{
- struct ata_queued_cmd *qc;
+ struct ata_port *ap = qc->ap;
u8 drv_stat;
/*
@@ -3489,9 +3484,6 @@ static int ata_pio_complete (struct ata_
}
}
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
-
drv_stat = ata_wait_idle(ap);
if (!ata_ok(drv_stat)) {
qc->err_mask |= __ac_err_mask(drv_stat);
@@ -3827,15 +3819,14 @@ err_out:
/**
* ata_pio_block - start PIO on a block
- * @ap: the target ata_port
+ * @qc: qc to transfer block for
*
* LOCKING:
* None. (executing in kernel thread context)
*/
-
-static void ata_pio_block(struct ata_port *ap)
+static void ata_pio_block(struct ata_queued_cmd *qc)
{
- struct ata_queued_cmd *qc;
+ struct ata_port *ap = qc->ap;
u8 status;
/*
@@ -3857,9 +3848,6 @@ static void ata_pio_block(struct ata_por
}
}
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
-
/* check error */
if (status & (ATA_ERR | ATA_DF)) {
qc->err_mask |= AC_ERR_DEV;
@@ -3888,12 +3876,9 @@ static void ata_pio_block(struct ata_por
}
}
-static void ata_pio_error(struct ata_port *ap)
+static void ata_pio_error(struct ata_queued_cmd *qc)
{
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
+ struct ata_port *ap = qc->ap;
if (qc->tf.command != ATA_CMD_PACKET)
printk(KERN_WARNING "ata%u: dev %u PIO error\n",
@@ -3911,7 +3896,8 @@ static void ata_pio_error(struct ata_por
static void ata_pio_task(void *_data)
{
- struct ata_port *ap = _data;
+ struct ata_queued_cmd *qc = _data;
+ struct ata_port *ap = qc->ap;
unsigned long timeout;
int qc_completed;
@@ -3924,33 +3910,33 @@ fsm_start:
return;
case HSM_ST:
- ata_pio_block(ap);
+ ata_pio_block(qc);
break;
case HSM_ST_LAST:
- qc_completed = ata_pio_complete(ap);
+ qc_completed = ata_pio_complete(qc);
break;
case HSM_ST_POLL:
case HSM_ST_LAST_POLL:
- timeout = ata_pio_poll(ap);
+ timeout = ata_pio_poll(qc);
break;
case HSM_ST_TMOUT:
case HSM_ST_ERR:
- ata_pio_error(ap);
+ ata_pio_error(qc);
return;
}
if (timeout)
- ata_port_queue_task(ap, ata_pio_task, ap, timeout);
+ ata_port_queue_task(ap, ata_pio_task, qc, timeout);
else if (!qc_completed)
goto fsm_start;
}
/**
* atapi_packet_task - Write CDB bytes to hardware
- * @_data: Port to which ATAPI device is attached.
+ * @_data: qc in progress
*
* When device has indicated its readiness to accept
* a CDB, this function is called. Send the CDB.
@@ -3961,17 +3947,12 @@ fsm_start:
* LOCKING:
* Kernel thread context (may sleep)
*/
-
static void atapi_packet_task(void *_data)
{
- struct ata_port *ap = _data;
- struct ata_queued_cmd *qc;
+ struct ata_queued_cmd *qc = _data;
+ struct ata_port *ap = qc->ap;
u8 status;
- qc = ata_qc_from_tag(ap, ap->active_tag);
- WARN_ON(qc == NULL);
- WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
-
/* sleep-wait for BSY to clear */
DPRINTK("busy wait\n");
if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) {
@@ -4011,7 +3992,7 @@ static void atapi_packet_task(void *_dat
/* PIO commands are handled by polling */
ap->hsm_task_state = HSM_ST;
- ata_port_queue_task(ap, ata_pio_task, ap, 0);
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
}
return;
@@ -4317,26 +4298,26 @@ unsigned int ata_qc_issue_prot(struct at
ata_qc_set_polling(qc);
ata_tf_to_host(ap, &qc->tf);
ap->hsm_task_state = HSM_ST;
- ata_port_queue_task(ap, ata_pio_task, ap, 0);
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
break;
case ATA_PROT_ATAPI:
ata_qc_set_polling(qc);
ata_tf_to_host(ap, &qc->tf);
- ata_port_queue_task(ap, atapi_packet_task, ap, 0);
+ ata_port_queue_task(ap, atapi_packet_task, qc, 0);
break;
case ATA_PROT_ATAPI_NODATA:
ap->flags |= ATA_FLAG_NOINTR;
ata_tf_to_host(ap, &qc->tf);
- ata_port_queue_task(ap, atapi_packet_task, ap, 0);
+ ata_port_queue_task(ap, atapi_packet_task, qc, 0);
break;
case ATA_PROT_ATAPI_DMA:
ap->flags |= ATA_FLAG_NOINTR;
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->bmdma_setup(qc); /* set up bmdma */
- ata_port_queue_task(ap, atapi_packet_task, ap, 0);
+ ata_port_queue_task(ap, atapi_packet_task, qc, 0);
break;
default:
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 06/14] libata: clear ATA_DFLAG_PIO before setting it
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (6 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 08/14] libata: pass qc around intead of ap during PIO Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 04/14] libata: clean up constants Tejun Heo
` (6 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
ata_dev_set_mode() is now responsible for managing ATA_DFLAG_PIO.
Clear it before setting it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
24040601836bac07896b6be91011b217e7eb8083
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 0bc81c3..fe66e04 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1960,6 +1960,7 @@ static int ata_dev_set_mode(struct ata_p
unsigned int err_mask;
int rc;
+ dev->flags &= ~ATA_DFLAG_PIO;
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 04/14] libata: clean up constants
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (7 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 06/14] libata: clear ATA_DFLAG_PIO before setting it Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 20:02 ` Jeff Garzik
2006-04-01 10:48 ` [PATCH 12/14] libata: dec scmd->retries for qcs with zero err_mask Tejun Heo
` (5 subsequent siblings)
14 siblings, 1 reply; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
* Reorder ATA_DFLAG_* such that feature flags determined by
ata_dev_configure() are on lower bits. Reserve lower eight bits
for this purpose and allocate dynamic flags from bit 8.
* Reorder ATA_FLAG_* such that feature flags determined during driver
initiailization are on bits 0:15, dynamic flags on 16:23 and LLDD
specific flags on 24:31.
* Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency.
(ATA_FLAG_* are always about ports).
* Kill trailing white space and lower-case an one line comment for
consistency.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 18 ++++++------
drivers/scsi/libata-scsi.c | 2 +
drivers/scsi/pdc_adma.c | 4 +--
drivers/scsi/sata_mv.c | 2 +
drivers/scsi/sata_nv.c | 2 +
drivers/scsi/sata_promise.c | 2 +
drivers/scsi/sata_qstor.c | 4 +--
drivers/scsi/sata_sil24.c | 2 +
drivers/scsi/sata_sx4.c | 2 +
drivers/scsi/sata_vsc.c | 2 +
include/linux/libata.h | 62 +++++++++++++++++++++++--------------------
11 files changed, 53 insertions(+), 49 deletions(-)
100a767c9b63a902301def9c45f9f258f382223a
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 402c0e4..0df994d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1045,7 +1045,7 @@ ata_exec_internal(struct ata_port *ap, s
*
* Kill the following code as soon as those drivers are fixed.
*/
- if (ap->flags & ATA_FLAG_PORT_DISABLED) {
+ if (ap->flags & ATA_FLAG_DISABLED) {
err_mask |= AC_ERR_SYSTEM;
ata_port_probe(ap);
}
@@ -1395,7 +1395,7 @@ static int ata_bus_probe(struct ata_port
} else {
ap->ops->phy_reset(ap);
- if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
+ if (!(ap->flags & ATA_FLAG_DISABLED))
for (i = 0; i < ATA_MAX_DEVICES; i++)
classes[i] = ap->device[i].class;
@@ -1491,7 +1491,7 @@ static int ata_bus_probe(struct ata_port
void ata_port_probe(struct ata_port *ap)
{
- ap->flags &= ~ATA_FLAG_PORT_DISABLED;
+ ap->flags &= ~ATA_FLAG_DISABLED;
}
/**
@@ -1565,7 +1565,7 @@ void __sata_phy_reset(struct ata_port *a
else
ata_port_disable(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ if (ap->flags & ATA_FLAG_DISABLED)
return;
if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
@@ -1590,7 +1590,7 @@ void __sata_phy_reset(struct ata_port *a
void sata_phy_reset(struct ata_port *ap)
{
__sata_phy_reset(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ if (ap->flags & ATA_FLAG_DISABLED)
return;
ata_bus_reset(ap);
}
@@ -1629,7 +1629,7 @@ void ata_port_disable(struct ata_port *a
{
ap->device[0].class = ATA_DEV_NONE;
ap->device[1].class = ATA_DEV_NONE;
- ap->flags |= ATA_FLAG_PORT_DISABLED;
+ ap->flags |= ATA_FLAG_DISABLED;
}
/**
@@ -2262,7 +2262,7 @@ static unsigned int ata_bus_softreset(st
* Obtains host_set lock.
*
* SIDE EFFECTS:
- * Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
+ * Sets ATA_FLAG_DISABLED if bus reset fails.
*/
void ata_bus_reset(struct ata_port *ap)
@@ -4457,7 +4457,7 @@ irqreturn_t ata_interrupt (int irq, void
ap = host_set->ports[i];
if (ap &&
- !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
@@ -4678,7 +4678,7 @@ static void ata_host_init(struct ata_por
host->unique_id = ata_unique_id++;
host->max_cmd_len = 12;
- ap->flags = ATA_FLAG_PORT_DISABLED;
+ ap->flags = ATA_FLAG_DISABLED;
ap->id = host->unique_id;
ap->host = host;
ap->ctl = ATA_DEVCTL_OBS;
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index bcbf71e..096bdff 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2728,7 +2728,7 @@ void ata_scsi_scan_host(struct ata_port
struct ata_device *dev;
unsigned int i;
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ if (ap->flags & ATA_FLAG_DISABLED)
return;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index 3c85c4b..d64073d 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -456,7 +456,7 @@ static inline unsigned int adma_intr_pkt
continue;
handled = 1;
adma_enter_reg_mode(ap);
- if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
+ if (ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))
continue;
pp = ap->private_data;
if (!pp || pp->state != adma_state_pkt)
@@ -481,7 +481,7 @@ static inline unsigned int adma_intr_mmi
for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
struct ata_port *ap;
ap = host_set->ports[port_no];
- if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) {
+ if (ap && (!(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR)))) {
struct ata_queued_cmd *qc;
struct adma_port_priv *pp = ap->private_data;
if (!pp || pp->state != adma_state_mmio)
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 0f7d334..e9152f8 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -1397,7 +1397,7 @@ static void mv_host_intr(struct ata_host
}
}
- if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
+ if (ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))
continue;
err_mask = ac_err_mask(ata_status);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index f77bf18..72721ac 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -280,7 +280,7 @@ static irqreturn_t nv_interrupt (int irq
ap = host_set->ports[i];
if (ap &&
- !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index cc928c6..9557c7a 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -534,7 +534,7 @@ static irqreturn_t pdc_interrupt (int ir
ap = host_set->ports[i];
tmp = mask & (1 << (i + 1));
if (tmp && ap &&
- !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 9ffe1ef..8ef042a 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -396,7 +396,7 @@ static inline unsigned int qs_intr_pkt(s
sff1, sff0, port_no, sHST, sDST);
handled = 1;
if (ap && !(ap->flags &
- (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) {
+ (ATA_FLAG_DISABLED|ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
struct qs_port_priv *pp = ap->private_data;
if (!pp || pp->state != qs_state_pkt)
@@ -429,7 +429,7 @@ static inline unsigned int qs_intr_mmio(
struct ata_port *ap;
ap = host_set->ports[port_no];
if (ap &&
- !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
struct qs_port_priv *pp = ap->private_data;
if (!pp || pp->state != qs_state_mmio)
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 068c98a..c34f6da 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -770,7 +770,7 @@ static irqreturn_t sil24_interrupt(int i
for (i = 0; i < host_set->n_ports; i++)
if (status & (1 << i)) {
struct ata_port *ap = host_set->ports[i];
- if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
+ if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
sil24_host_intr(host_set->ports[i]);
handled++;
} else
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index ae70f60..3af28ef 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -834,7 +834,7 @@ static irqreturn_t pdc20621_interrupt (i
tmp = mask & (1 << i);
VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp);
if (tmp && ap &&
- !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 836bbbb..cecc1f7 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -222,7 +222,7 @@ static irqreturn_t vsc_sata_interrupt (i
ap = host_set->ports[i];
if (ap && !(ap->flags &
- (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) {
+ (ATA_FLAG_DISABLED|ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 036b737..9f942d4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -120,9 +120,11 @@ enum {
ATA_SHT_USE_CLUSTERING = 1,
/* struct ata_device stuff */
- ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
- ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
- ATA_DFLAG_LBA = (1 << 2), /* device supports LBA */
+ ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */
+ ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */
+ ATA_DFLAG_CFG_MASK = (1 << 8) - 1,
+
+ ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -132,32 +134,34 @@ enum {
ATA_DEV_NONE = 5, /* no device */
/* struct ata_port flags */
- ATA_FLAG_SLAVE_POSS = (1 << 1), /* host supports slave dev */
+ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
/* (doesn't imply presence) */
- ATA_FLAG_PORT_DISABLED = (1 << 2), /* port is disabled, ignore it */
- ATA_FLAG_SATA = (1 << 3),
- ATA_FLAG_NO_LEGACY = (1 << 4), /* no legacy mode check */
- ATA_FLAG_SRST = (1 << 5), /* (obsolete) use ATA SRST, not E.D.D. */
- ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
- ATA_FLAG_SATA_RESET = (1 << 7), /* (obsolete) use COMRESET */
- ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
- ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
- * proper HSM is in place. */
- ATA_FLAG_DEBUGMSG = (1 << 10),
- ATA_FLAG_NO_ATAPI = (1 << 11), /* No ATAPI support */
-
- ATA_FLAG_SUSPENDED = (1 << 12), /* port is suspended */
-
- ATA_FLAG_PIO_LBA48 = (1 << 13), /* Host DMA engine is LBA28 only */
- ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */
-
- ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* Flush port task */
-
- ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
- ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
- ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
+ ATA_FLAG_SATA = (1 << 1),
+ ATA_FLAG_NO_LEGACY = (1 << 2), /* no legacy mode check */
+ ATA_FLAG_MMIO = (1 << 3), /* use MMIO, not PIO */
+ ATA_FLAG_SRST = (1 << 4), /* (obsolete) use ATA SRST, not E.D.D. */
+ ATA_FLAG_SATA_RESET = (1 << 5), /* (obsolete) use COMRESET */
+ ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */
+ ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */
+ ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */
+ ATA_FLAG_IRQ_MASK = (1 << 9), /* Mask IRQ in PIO xfers */
+
+ ATA_FLAG_NOINTR = (1 << 16), /* FIXME: Remove this once
+ * proper HSM is in place. */
+ ATA_FLAG_DEBUGMSG = (1 << 17),
+ ATA_FLAG_FLUSH_PORT_TASK = (1 << 18), /* flush port task */
+
+ ATA_FLAG_DISABLED = (1 << 19), /* port is disabled, ignore it */
+ ATA_FLAG_SUSPENDED = (1 << 20), /* port is suspended */
+
+ /* bits 24:31 of ap->flags are reserved for LLDD specific flags */
+
+ /* struct ata_queued_cmd flags */
+ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
+ ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */
+ ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
- ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */
+ ATA_QCFLAG_EH_SCHEDULED = (1 << 3), /* EH scheduled */
/* host set flags */
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */
@@ -206,8 +210,8 @@ enum {
/* size of buffer to pad xfers ending on unaligned boundaries */
ATA_DMA_PAD_SZ = 4,
ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE,
-
- /* Masks for port functions */
+
+ /* masks for port functions */
ATA_PORT_PRIMARY = (1 << 0),
ATA_PORT_SECONDARY = (1 << 1),
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 04/14] libata: clean up constants
2006-04-01 10:48 ` [PATCH 04/14] libata: clean up constants Tejun Heo
@ 2006-04-01 20:02 ` Jeff Garzik
0 siblings, 0 replies; 19+ messages in thread
From: Jeff Garzik @ 2006-04-01 20:02 UTC (permalink / raw)
To: Tejun Heo; +Cc: alan, albertcc, linux-ide
Tejun Heo wrote:
> * Reorder ATA_DFLAG_* such that feature flags determined by
> ata_dev_configure() are on lower bits. Reserve lower eight bits
> for this purpose and allocate dynamic flags from bit 8.
>
> * Reorder ATA_FLAG_* such that feature flags determined during driver
> initiailization are on bits 0:15, dynamic flags on 16:23 and LLDD
> specific flags on 24:31.
>
> * Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency.
> (ATA_FLAG_* are always about ports).
>
> * Kill trailing white space and lower-case an one line comment for
> consistency.
Separate cleanups and new flags/constants into separate patches, please.
ACK patches 1-4, modulo the above comment.
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 12/14] libata: dec scmd->retries for qcs with zero err_mask
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (8 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 04/14] libata: clean up constants Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 13/14] libata: separate out libata-eh.c Tejun Heo
` (4 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
qcs might get retried because of unrelated failure. e.g. NCQ command
failure causes the whole command set to be aborted. Decrement
scmd->retries for such retrials to avoid unnecessarily failing
commands. Note that scmd->retries will be incremented the first time.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-scsi.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
712ea26a9289746c7887ef8878ea6b32c16d85c9
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 2870652..4400815 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -831,11 +831,14 @@ void ata_eh_qc_complete(struct ata_queue
* should be retried. To be used from EH.
*
* SCSI midlayer limits the number of retries to scmd->allowed.
- * This function might need to adjust scmd->retries for commands
- * which get retried due to unrelated NCQ failures.
+ * scmd->retries is decremented for commands which get retried
+ * due to unrelated failures (qc->err_mask is zero).
*/
void ata_eh_qc_retry(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ if (!qc->err_mask && scmd->retries)
+ scmd->retries--;
__ata_eh_qc_complete(qc);
}
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 13/14] libata: separate out libata-eh.c
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (9 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 12/14] libata: dec scmd->retries for qcs with zero err_mask Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 14/14] libata: make some libata-core routines extern Tejun Heo
` (3 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
A lot of EH codes are about to be added to libata. Separate out
libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(),
ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and
ata_eh_qc_retry() are moved. No code is changed by this patch.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/Makefile | 2
drivers/scsi/libata-core.c | 102 +----------------
drivers/scsi/libata-eh.c | 264 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/libata-scsi.c | 130 ----------------------
drivers/scsi/libata.h | 4 +
include/linux/libata.h | 12 +-
6 files changed, 281 insertions(+), 233 deletions(-)
create mode 100644 drivers/scsi/libata-eh.c
b573806bbddcc9467450b7b91ce0b31236fc871c
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index e513c31..503f189 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -165,7 +165,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
-libata-objs := libata-core.o libata-scsi.o libata-bmdma.o
+libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
# Files generated that shall be removed upon make clean
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 4c9aa75..c893129 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4005,99 +4005,6 @@ err_out:
}
/**
- * ata_qc_timeout - Handle timeout of queued command
- * @qc: Command that timed out
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct ata_host_set *host_set = ap->host_set;
- u8 host_stat = 0, drv_stat;
- unsigned long flags;
-
- DPRINTK("ENTER\n");
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- spin_lock_irqsave(&host_set->lock, flags);
-
- switch (qc->tf.protocol) {
-
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
- host_stat = ap->ops->bmdma_status(ap);
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- /* fall through */
-
- default:
- ata_altstatus(ap);
- drv_stat = ata_chk_status(ap);
-
- /* ack bmdma irq events */
- ap->ops->irq_clear(ap);
-
- printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat, host_stat);
-
- /* complete taskfile transaction */
- qc->err_mask |= ac_err_mask(drv_stat);
- break;
- }
-
- spin_unlock_irqrestore(&host_set->lock, flags);
-
- ata_eh_qc_complete(qc);
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eng_timeout - Handle timeout of queued command
- * @ap: Port on which timed-out command is active
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-
-void ata_eng_timeout(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
-
- DPRINTK("EXIT\n");
-}
-
-/**
* ata_qc_new - Request an available ATA command, for queueing
* @ap: Port associated with device @dev
* @dev: Device from whom we request an available command structure
@@ -5134,7 +5041,6 @@ EXPORT_SYMBOL_GPL(ata_sg_init);
EXPORT_SYMBOL_GPL(ata_sg_init_one);
EXPORT_SYMBOL_GPL(__ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_tf_load);
EXPORT_SYMBOL_GPL(ata_tf_read);
EXPORT_SYMBOL_GPL(ata_noop_dev_select);
@@ -5174,15 +5080,12 @@ EXPORT_SYMBOL_GPL(ata_busy_sleep);
EXPORT_SYMBOL_GPL(ata_port_queue_task);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
-EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
-EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_compute);
@@ -5204,3 +5107,8 @@ EXPORT_SYMBOL_GPL(ata_device_suspend);
EXPORT_SYMBOL_GPL(ata_device_resume);
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
+
+EXPORT_SYMBOL_GPL(ata_scsi_error);
+EXPORT_SYMBOL_GPL(ata_eng_timeout);
+EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
+EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
new file mode 100644
index 0000000..e73f561
--- /dev/null
+++ b/drivers/scsi/libata-eh.c
@@ -0,0 +1,264 @@
+/*
+ * libata-eh.c - libata error handling
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2006 Tejun Heo <htejun@gmail.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Hardware documentation available from http://www.t13.org/ and
+ * http://www.sata-io.org/
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+
+#include <linux/libata.h>
+
+#include "libata.h"
+
+/**
+ * ata_scsi_timed_out - SCSI layer time out callback
+ * @cmd: timed out SCSI command
+ *
+ * Handles SCSI layer timeout. We race with normal completion of
+ * the qc for @cmd. If the qc is already gone, we lose and let
+ * the scsi command finish (EH_HANDLED). Otherwise, the qc has
+ * timed out and EH should be invoked. Prevent ata_qc_complete()
+ * from finishing it by setting EH_SCHEDULED and return
+ * EH_NOT_HANDLED.
+ *
+ * LOCKING:
+ * Called from timer context
+ *
+ * RETURNS:
+ * EH_HANDLED or EH_NOT_HANDLED
+ */
+enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
+ unsigned long flags;
+ struct ata_queued_cmd *qc;
+ enum scsi_eh_timer_return ret = EH_HANDLED;
+
+ DPRINTK("ENTER\n");
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc) {
+ WARN_ON(qc->scsicmd != cmd);
+ qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ret = EH_NOT_HANDLED;
+ }
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("EXIT, ret=%d\n", ret);
+ return ret;
+}
+
+/**
+ * ata_scsi_error - SCSI layer error handler callback
+ * @host: SCSI host on which error occurred
+ *
+ * Handles SCSI-layer-thrown error events.
+ *
+ * LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
+ *
+ * RETURNS:
+ * Zero.
+ */
+int ata_scsi_error(struct Scsi_Host *host)
+{
+ struct ata_port *ap = (struct ata_port *)&host->hostdata[0];
+
+ DPRINTK("ENTER\n");
+
+ /* synchronize with IRQ handler and port task */
+ spin_unlock_wait(&ap->host_set->lock);
+ ata_port_flush_task(ap);
+
+ WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
+
+ ap->ops->eng_timeout(ap);
+
+ WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
+
+ scsi_eh_flush_done_q(&ap->eh_done_q);
+
+ DPRINTK("EXIT\n");
+ return 0;
+}
+
+/**
+ * ata_qc_timeout - Handle timeout of queued command
+ * @qc: Command that timed out
+ *
+ * Some part of the kernel (currently, only the SCSI layer)
+ * has noticed that the active command on port @ap has not
+ * completed after a specified length of time. Handle this
+ * condition by disabling DMA (if necessary) and completing
+ * transactions, with error if necessary.
+ *
+ * This also handles the case of the "lost interrupt", where
+ * for some reason (possibly hardware bug, possibly driver bug)
+ * an interrupt was not delivered to the driver, even though the
+ * transaction completed successfully.
+ *
+ * LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
+ */
+static void ata_qc_timeout(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_host_set *host_set = ap->host_set;
+ u8 host_stat = 0, drv_stat;
+ unsigned long flags;
+
+ DPRINTK("ENTER\n");
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ spin_lock_irqsave(&host_set->lock, flags);
+
+ switch (qc->tf.protocol) {
+
+ case ATA_PROT_DMA:
+ case ATA_PROT_ATAPI_DMA:
+ host_stat = ap->ops->bmdma_status(ap);
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+
+ /* fall through */
+
+ default:
+ ata_altstatus(ap);
+ drv_stat = ata_chk_status(ap);
+
+ /* ack bmdma irq events */
+ ap->ops->irq_clear(ap);
+
+ printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
+ ap->id, qc->tf.command, drv_stat, host_stat);
+
+ /* complete taskfile transaction */
+ qc->err_mask |= ac_err_mask(drv_stat);
+ break;
+ }
+
+ spin_unlock_irqrestore(&host_set->lock, flags);
+
+ ata_eh_qc_complete(qc);
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_eng_timeout - Handle timeout of queued command
+ * @ap: Port on which timed-out command is active
+ *
+ * Some part of the kernel (currently, only the SCSI layer)
+ * has noticed that the active command on port @ap has not
+ * completed after a specified length of time. Handle this
+ * condition by disabling DMA (if necessary) and completing
+ * transactions, with error if necessary.
+ *
+ * This also handles the case of the "lost interrupt", where
+ * for some reason (possibly hardware bug, possibly driver bug)
+ * an interrupt was not delivered to the driver, even though the
+ * transaction completed successfully.
+ *
+ * LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
+ */
+void ata_eng_timeout(struct ata_port *ap)
+{
+ DPRINTK("ENTER\n");
+
+ ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
+
+ DPRINTK("EXIT\n");
+}
+
+static void ata_eh_scsidone(struct scsi_cmnd *scmd)
+{
+ /* nada */
+}
+
+static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc->scsidone = ata_eh_scsidone;
+ __ata_qc_complete(qc);
+ WARN_ON(ata_tag_valid(qc->tag));
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
+}
+
+/**
+ * ata_eh_qc_complete - Complete an active ATA command from EH
+ * @qc: Command to complete
+ *
+ * Indicate to the mid and upper layers that an ATA command has
+ * completed. To be used from EH.
+ */
+void ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ scmd->retries = scmd->allowed;
+ __ata_eh_qc_complete(qc);
+}
+
+/**
+ * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
+ * @qc: Command to retry
+ *
+ * Indicate to the mid and upper layers that an ATA command
+ * should be retried. To be used from EH.
+ *
+ * SCSI midlayer limits the number of retries to scmd->allowed.
+ * scmd->retries is decremented for commands which get retried
+ * due to unrelated failures (qc->err_mask is zero).
+ */
+void ata_eh_qc_retry(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ if (!qc->err_mask && scmd->retries)
+ scmd->retries--;
+ __ata_eh_qc_complete(qc);
+}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 4400815..745fc26 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -53,7 +53,6 @@
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
-enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
#define RW_RECOVERY_MPAGE 0x1
#define RW_RECOVERY_MPAGE_LEN 12
@@ -714,135 +713,6 @@ int ata_scsi_slave_config(struct scsi_de
}
/**
- * ata_scsi_timed_out - SCSI layer time out callback
- * @cmd: timed out SCSI command
- *
- * Handles SCSI layer timeout. We race with normal completion of
- * the qc for @cmd. If the qc is already gone, we lose and let
- * the scsi command finish (EH_HANDLED). Otherwise, the qc has
- * timed out and EH should be invoked. Prevent ata_qc_complete()
- * from finishing it by setting EH_SCHEDULED and return
- * EH_NOT_HANDLED.
- *
- * LOCKING:
- * Called from timer context
- *
- * RETURNS:
- * EH_HANDLED or EH_NOT_HANDLED
- */
-enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *host = cmd->device->host;
- struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
- unsigned long flags;
- struct ata_queued_cmd *qc;
- enum scsi_eh_timer_return ret = EH_HANDLED;
-
- DPRINTK("ENTER\n");
-
- spin_lock_irqsave(&ap->host_set->lock, flags);
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc) {
- WARN_ON(qc->scsicmd != cmd);
- qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
- qc->err_mask |= AC_ERR_TIMEOUT;
- ret = EH_NOT_HANDLED;
- }
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- DPRINTK("EXIT, ret=%d\n", ret);
- return ret;
-}
-
-/**
- * ata_scsi_error - SCSI layer error handler callback
- * @host: SCSI host on which error occurred
- *
- * Handles SCSI-layer-thrown error events.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- *
- * RETURNS:
- * Zero.
- */
-
-int ata_scsi_error(struct Scsi_Host *host)
-{
- struct ata_port *ap = (struct ata_port *)&host->hostdata[0];
-
- DPRINTK("ENTER\n");
-
- /* synchronize with IRQ handler and port task */
- spin_unlock_wait(&ap->host_set->lock);
- ata_port_flush_task(ap);
-
- WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
-
- ap->ops->eng_timeout(ap);
-
- WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
-
- scsi_eh_flush_done_q(&ap->eh_done_q);
-
- DPRINTK("EXIT\n");
- return 0;
-}
-
-static void ata_eh_scsidone(struct scsi_cmnd *scmd)
-{
- /* nada */
-}
-
-static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scsi_cmnd *scmd = qc->scsicmd;
- unsigned long flags;
-
- spin_lock_irqsave(&ap->host_set->lock, flags);
- qc->scsidone = ata_eh_scsidone;
- __ata_qc_complete(qc);
- WARN_ON(ata_tag_valid(qc->tag));
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
-}
-
-/**
- * ata_eh_qc_complete - Complete an active ATA command from EH
- * @qc: Command to complete
- *
- * Indicate to the mid and upper layers that an ATA command has
- * completed. To be used from EH.
- */
-void ata_eh_qc_complete(struct ata_queued_cmd *qc)
-{
- struct scsi_cmnd *scmd = qc->scsicmd;
- scmd->retries = scmd->allowed;
- __ata_eh_qc_complete(qc);
-}
-
-/**
- * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
- * @qc: Command to retry
- *
- * Indicate to the mid and upper layers that an ATA command
- * should be retried. To be used from EH.
- *
- * SCSI midlayer limits the number of retries to scmd->allowed.
- * scmd->retries is decremented for commands which get retried
- * due to unrelated failures (qc->err_mask is zero).
- */
-void ata_eh_qc_retry(struct ata_queued_cmd *qc)
-{
- struct scsi_cmnd *scmd = qc->scsicmd;
- if (!qc->err_mask && scmd->retries)
- scmd->retries--;
- __ata_eh_qc_complete(qc);
-}
-
-/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
* @scsicmd: SCSI command to translate
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 1c755b1..75e9bd5 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -60,7 +60,6 @@ extern int ata_cmd_ioctl(struct scsi_dev
extern struct scsi_transport_template ata_scsi_transport_template;
extern void ata_scsi_scan_host(struct ata_port *ap);
-extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
@@ -90,4 +89,7 @@ extern void ata_scsi_rbuf_fill(struct at
unsigned int (*actor) (struct ata_scsi_args *args,
u8 *rbuf, unsigned int buflen));
+/* libata-eh.c */
+extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
+
#endif /* __LIBATA_H__ */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 1f9e6ea..7162f05 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -533,9 +533,6 @@ extern void ata_host_set_remove(struct a
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
-extern int ata_scsi_error(struct Scsi_Host *host);
-extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int ata_scsi_device_resume(struct scsi_device *);
@@ -584,7 +581,6 @@ extern void ata_bmdma_stop(struct ata_qu
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eng_timeout(struct ata_port *ap);
extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
@@ -639,6 +635,14 @@ extern int pci_test_config_bits(struct p
extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long);
#endif /* CONFIG_PCI */
+/*
+ * EH
+ */
+extern int ata_scsi_error(struct Scsi_Host *host);
+extern void ata_eng_timeout(struct ata_port *ap);
+extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
+extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+
static inline int
ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 14/14] libata: make some libata-core routines extern
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (10 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 13/14] libata: separate out libata-eh.c Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 11/14] libata: add @cdb to ata_exec_internal() Tejun Heo
` (2 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
Make libata-core routines which will be used by EH implementation
extern.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 31 +++++++++++++------------------
drivers/scsi/libata.h | 14 ++++++++++++++
2 files changed, 27 insertions(+), 18 deletions(-)
5349c724ad0a9c179ff3e56c235dfd4b20fa12d1
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index c893129..681ef82 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -65,10 +65,6 @@ static unsigned int ata_dev_init_params(
struct ata_device *dev,
u16 heads,
u16 sectors);
-static int ata_down_sata_spd_limit(struct ata_port *ap, struct ata_device *dev);
-static int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
- int force_pio0);
-static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
struct ata_device *dev);
static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev);
@@ -412,7 +408,7 @@ static const char *sata_spd_string(unsig
return spd_str[spd - 1];
}
-static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
+void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
{
if (ata_dev_enabled(dev)) {
printk(KERN_WARNING "ata%u: dev %u disabled\n",
@@ -979,10 +975,9 @@ void ata_qc_complete_internal(struct ata
* None. Should be called with kernel context, might sleep.
*/
-static unsigned
-ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
- struct ata_taskfile *tf, const u8 *cdb,
- int dma_dir, void *buf, unsigned int buflen)
+unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
+ struct ata_taskfile *tf, const u8 *cdb,
+ int dma_dir, void *buf, unsigned int buflen)
{
u8 command = tf->command;
struct ata_queued_cmd *qc;
@@ -1650,7 +1645,7 @@ void ata_port_disable(struct ata_port *a
* RETURNS:
* 0 on success, negative errno on failure
*/
-static int ata_down_sata_spd_limit(struct ata_port *ap, struct ata_device *dev)
+int ata_down_sata_spd_limit(struct ata_port *ap, struct ata_device *dev)
{
u32 spd, mask;
int highbit;
@@ -1715,7 +1710,7 @@ static int __ata_set_sata_spd_needed(str
* RETURNS:
* 1 if SATA spd configuration is needed, 0 otherwise.
*/
-static int ata_set_sata_spd_needed(struct ata_port *ap, struct ata_device *dev)
+int ata_set_sata_spd_needed(struct ata_port *ap, struct ata_device *dev)
{
u32 scontrol;
@@ -1742,7 +1737,7 @@ static int ata_set_sata_spd_needed(struc
* 0 if spd doesn't need to be changed, 1 if spd has been
* changed. -EOPNOTSUPP if SCR registers are inaccessible.
*/
-static int ata_set_sata_spd(struct ata_port *ap, struct ata_device *dev)
+int ata_set_sata_spd(struct ata_port *ap, struct ata_device *dev)
{
u32 scontrol;
@@ -1924,8 +1919,8 @@ int ata_timing_compute(struct ata_device
* RETURNS:
* 0 on success, negative errno on failure
*/
-static int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
- int force_pio0)
+int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
+ int force_pio0)
{
unsigned long xfer_mask;
int highbit;
@@ -2003,7 +1998,7 @@ static int ata_dev_set_mode(struct ata_p
* RETURNS:
* 0 on success, negative errno otherwise
*/
-static int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
{
struct ata_device *dev;
int i, rc = 0, used_dma = 0, found = 0;
@@ -2589,9 +2584,9 @@ int ata_std_probe_reset(struct ata_port
ata_std_postreset, classes);
}
-static int ata_do_reset(struct ata_port *ap,
- ata_reset_fn_t reset, ata_postreset_fn_t postreset,
- int verbose, unsigned int *classes)
+int ata_do_reset(struct ata_port *ap,
+ ata_reset_fn_t reset, ata_postreset_fn_t postreset,
+ int verbose, unsigned int *classes)
{
int i, rc;
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 75e9bd5..3bebca9 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -45,7 +45,21 @@ extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
+extern void ata_dev_disable(struct ata_port *ap, struct ata_device *dev);
extern void ata_port_flush_task(struct ata_port *ap);
+extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
+ struct ata_taskfile *tf, const u8 *cdb,
+ int dma_dir, void *buf, unsigned int buflen);
+extern int ata_down_sata_spd_limit(struct ata_port *ap, struct ata_device *dev);
+extern int ata_set_sata_spd_needed(struct ata_port *ap, struct ata_device *dev);
+extern int ata_set_sata_spd(struct ata_port *ap, struct ata_device *dev);
+extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
+ int force_pio0);
+extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
+extern int ata_do_reset(struct ata_port *ap,
+ ata_reset_fn_t reset,
+ ata_postreset_fn_t postreset,
+ int verbose, unsigned int *classes);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 11/14] libata: add @cdb to ata_exec_internal()
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (11 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 14/14] libata: make some libata-core routines extern Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 10:48 ` [PATCH 10/14] libata: don't read TF directly from sense generation functions Tejun Heo
2006-04-01 10:51 ` [PATCHSET] libata: prep for new EH Tejun Heo
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
Add @cdb to ata_exec_internal(). It will be used by new EH.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
528fe36d4d09b5200e52503210298c5569eeb6ff
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index ab7a654..4c9aa75 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -964,6 +964,7 @@ void ata_qc_complete_internal(struct ata
* @ap: Port to which the command is sent
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
+ * @cdb: CDB for packet command
* @dma_dir: Data tranfer direction of the command
* @buf: Data buffer of the command
* @buflen: Length of data buffer
@@ -980,7 +981,7 @@ void ata_qc_complete_internal(struct ata
static unsigned
ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
- struct ata_taskfile *tf,
+ struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen)
{
u8 command = tf->command;
@@ -995,6 +996,8 @@ ata_exec_internal(struct ata_port *ap, s
BUG_ON(qc == NULL);
qc->tf = *tf;
+ if (cdb)
+ memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
qc->dma_dir = dma_dir;
if (dma_dir != DMA_NONE) {
ata_sg_init_one(qc, buf, buflen);
@@ -1144,7 +1147,7 @@ static int ata_dev_read_id(struct ata_po
tf.protocol = ATA_PROT_PIO;
- err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
+ err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
if (err_mask) {
rc = -EIO;
@@ -2977,7 +2980,7 @@ static unsigned int ata_dev_set_xfermode
tf.protocol = ATA_PROT_NODATA;
tf.nsect = dev->xfer_mode;
- err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
+ err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
@@ -3017,7 +3020,7 @@ static unsigned int ata_dev_init_params(
tf.nsect = sectors;
tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
- err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
+ err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
@@ -4471,7 +4474,7 @@ static int ata_do_simple_cmd(struct ata_
tf.flags |= ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
- err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
+ err = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
if (err)
printk(KERN_ERR "%s: ata command failed: %d\n",
__FUNCTION__, err);
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 10/14] libata: don't read TF directly from sense generation functions
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (12 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 11/14] libata: add @cdb to ata_exec_internal() Tejun Heo
@ 2006-04-01 10:48 ` Tejun Heo
2006-04-01 20:05 ` Jeff Garzik
2006-04-01 10:51 ` [PATCHSET] libata: prep for new EH Tejun Heo
14 siblings, 1 reply; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:48 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide; +Cc: Tejun Heo
TF register might not be directly accessible depending on errors.
e.g. TF of failed NCQ command is in log page 10h. Make reading TF
responsibility of error handlers. For the current EH, simply push TF
reading into qc completion functions as they are practically part of
EH. New EH will fill qc->tf with status registers before complting
qcs.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-scsi.c | 27 +++++++++------------------
1 files changed, 9 insertions(+), 18 deletions(-)
d7387c910d1b6c1e9019e71e014758e77aff18e6
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index ec628ce..2870652 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -546,12 +546,6 @@ void ata_gen_ata_desc_sense(struct ata_q
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
/*
- * Read the controller registers.
- */
- WARN_ON(qc->ap->ops->tf_read == NULL);
- qc->ap->ops->tf_read(qc->ap, tf);
-
- /*
* Use ata_to_sense_error() to map status register bits
* onto sense key, asc & ascq.
*/
@@ -622,12 +616,6 @@ void ata_gen_fixed_sense(struct ata_queu
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
/*
- * Read the controller registers.
- */
- WARN_ON(qc->ap->ops->tf_read == NULL);
- qc->ap->ops->tf_read(qc->ap, tf);
-
- /*
* Use ata_to_sense_error() to map status register bits
* onto sense key, asc & ascq.
*/
@@ -1337,11 +1325,14 @@ static void ata_scsi_qc_complete(struct
*/
if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
((cdb[2] & 0x20) || need_sense)) {
+ qc->ap->ops->tf_read(qc->ap, &qc->tf);
ata_gen_ata_desc_sense(qc);
} else {
if (!need_sense) {
cmd->result = SAM_STAT_GOOD;
} else {
+ qc->ap->ops->tf_read(qc->ap, &qc->tf);
+
/* TODO: decide which descriptor format to use
* for 48b LBA devices and call that here
* instead of the fixed desc, which is only
@@ -2133,13 +2124,15 @@ void ata_scsi_badcmd(struct scsi_cmnd *c
static void atapi_sense_complete(struct ata_queued_cmd *qc)
{
- if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0))
+ if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) {
/* FIXME: not quite right; we don't want the
* translation of taskfile registers into
* a sense descriptors, since that's only
* correct for ATA, not ATAPI
*/
+ qc->ap->ops->tf_read(qc->ap, &qc->tf);
ata_gen_ata_desc_sense(qc);
+ }
qc->scsidone(qc->scsicmd);
ata_qc_free(qc);
@@ -2207,17 +2200,15 @@ static void atapi_qc_complete(struct ata
cmd->result = SAM_STAT_CHECK_CONDITION;
atapi_request_sense(qc);
return;
- }
-
- else if (unlikely(err_mask))
+ } else if (unlikely(err_mask)) {
/* FIXME: not quite right; we don't want the
* translation of taskfile registers into
* a sense descriptors, since that's only
* correct for ATA, not ATAPI
*/
+ qc->ap->ops->tf_read(qc->ap, &qc->tf);
ata_gen_ata_desc_sense(qc);
-
- else {
+ } else {
u8 *scsicmd = cmd->cmnd;
if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
--
1.2.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCHSET] libata: prep for new EH
2006-04-01 10:48 [PATCHSET] libata: prep for new EH Tejun Heo
` (13 preceding siblings ...)
2006-04-01 10:48 ` [PATCH 10/14] libata: don't read TF directly from sense generation functions Tejun Heo
@ 2006-04-01 10:51 ` Tejun Heo
14 siblings, 0 replies; 19+ messages in thread
From: Tejun Heo @ 2006-04-01 10:51 UTC (permalink / raw)
To: jgarzik, alan, albertcc, linux-ide
On Sat, Apr 01, 2006 at 07:48:36PM +0900, Tejun Heo wrote:
> Hello, Jeff, Alan and Albert.
>
> This patchset contains various fixes and updates in preparation for
> new EH. Most patches are straight-forward and even trivial.
>
> This patchset has 15 patches and is against
14, obviously. I was counting the scsi_eh_schdule() patch I've just
sent. BTW, that SCSI patch and this patchset are the last ones before
the real EH patchset. So, there now remain only two more patchsets -
the actual EH patchset and NCQ patchset. I think I'll be able to post
both of them before monday.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 19+ messages in thread