From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, albertcc@tw.ibm.com,
axboe@suse.de, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 03/14] libata: pass ata_scsi_translate() return value to SCSI midlayer
Date: Mon, 3 Apr 2006 17:32:39 +0900 [thread overview]
Message-ID: <11440531592356-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1144053158183-git-send-email-htejun@gmail.com>
ata_scsi_translate() will need to return SCSI_ML_QUEUE_DEVICE_BUSY to
achieve exlusion between NCQ and non-NCQ commands or among non-NCQ
commands. Pass its return value upward to SCSI midlayer.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-scsi.c | 34 +++++++++++++++++++++-------------
1 files changed, 21 insertions(+), 13 deletions(-)
a2a749416f31f6cc1b790f6170a47b79bcbd1d91
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index bfb9a5b..a1a4307 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1251,9 +1251,12 @@ static void ata_scsi_qc_complete(struct
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
+ *
+ * RETURNS:
+ * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command
+ * needs to be deferred.
*/
-
-static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev,
+static int ata_scsi_translate(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *),
ata_xlat_func_t xlat_func)
@@ -1294,13 +1297,13 @@ static void ata_scsi_translate(struct at
ata_qc_issue(qc);
VPRINTK("EXIT\n");
- return;
+ return 0;
early_finish:
ata_qc_free(qc);
done(cmd);
DPRINTK("EXIT - early finish (good or error)\n");
- return;
+ return 0;
err_did:
ata_qc_free(qc);
@@ -1308,7 +1311,7 @@ err_mem:
cmd->result = (DID_ERROR << 16);
done(cmd);
DPRINTK("EXIT - internal\n");
- return;
+ return 0;
}
/**
@@ -2461,19 +2464,23 @@ static inline void ata_scsi_dump_cdb(str
#endif
}
-static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
- struct ata_port *ap, struct ata_device *dev)
+static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
+ struct ata_port *ap, struct ata_device *dev)
{
+ int rc = 0;
+
if (dev->class == ATA_DEV_ATA) {
ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
cmd->cmnd[0]);
if (xlat_func)
- ata_scsi_translate(ap, dev, cmd, done, xlat_func);
+ rc = ata_scsi_translate(ap, dev, cmd, done, xlat_func);
else
ata_scsi_simulate(ap, dev, cmd, done);
} else
- ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
+ rc = ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
+
+ return rc;
}
/**
@@ -2492,15 +2499,16 @@ static inline void __ata_scsi_queuecmd(s
* Releases scsi-layer-held lock, and obtains host_set lock.
*
* RETURNS:
- * Zero.
+ * Return value from __ata_scsi_queuecmd() if @cmd can be queued,
+ * 0 otherwise.
*/
-
int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct ata_port *ap;
struct ata_device *dev;
struct scsi_device *scsidev = cmd->device;
struct Scsi_Host *shost = scsidev->host;
+ int rc = 0;
ap = (struct ata_port *) &shost->hostdata[0];
@@ -2511,7 +2519,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *
dev = ata_scsi_find_dev(ap, scsidev);
if (likely(dev))
- __ata_scsi_queuecmd(cmd, done, ap, dev);
+ rc = __ata_scsi_queuecmd(cmd, done, ap, dev);
else {
cmd->result = (DID_BAD_TARGET << 16);
done(cmd);
@@ -2519,7 +2527,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *
spin_unlock(&ap->host_set->lock);
spin_lock(shost->host_lock);
- return 0;
+ return rc;
}
/**
--
1.2.4
next prev parent reply other threads:[~2006-04-03 8:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-03 8:32 [PATCHSET] libata: add NCQ support Tejun Heo
2006-04-03 8:32 ` [PATCH 07/14] libata: implement ata_eh_read_log_10h() Tejun Heo
2006-04-03 8:32 ` [PATCH 01/14] libata: add NCQ related ATA constants and id macros Tejun Heo
2006-04-03 8:32 ` [PATCH 06/14] libata: implement NCQ command translation Tejun Heo
2006-04-03 8:32 ` [PATCH 04/14] libata: implement ap->sactive Tejun Heo
2006-04-03 8:32 ` [PATCH 10/14] libata: implement ata_ncq_complete() Tejun Heo
2006-04-03 8:32 ` [PATCH 08/14] libata: update EH to handle NCQ Tejun Heo
2006-04-03 8:32 ` [PATCH 05/14] libata: implement command exclusion Tejun Heo
2006-04-03 8:32 ` Tejun Heo [this message]
2006-04-03 8:32 ` [PATCH 09/14] libata: implement NCQ device configuration Tejun Heo
2006-04-03 8:32 ` [PATCH 02/14] libata: add NCQ related libata flags Tejun Heo
2006-04-03 8:32 ` [PATCH 13/14] ahci: kill pp->cmd_tbl_sg Tejun Heo
2006-04-03 8:32 ` [PATCH 11/14] libata: clean up AHCI constants in preparation for NCQ Tejun Heo
2006-04-03 8:32 ` [PATCH 14/14] ahci: implement NCQ suppport Tejun Heo
2006-04-03 8:32 ` [PATCH 12/14] ahci: add HOST_CAP_NCQ constant Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11440531592356-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.