Re: Problem with query and any operation on PGs

["Łukasz Chrustek" <skidoo@tlen.pl>]

> it is all I get for this osd in logs, when I try to start it.

>>> osd 10, 37, 72 are startable

>> With those started, I'd repeat the original sequence and get a fresh pg
>> query to confirm that it still wants just osd.6.

> You  mean about procedure with loop and taking down OSDs, which broken
> PGs are pointing to ?
> pg 1.60 is down+remapped+peering, acting [66,40]
> pg 1.165 is down+peering, acting [67,88,48]

> for pg 1.60 <--> 66 down, then in loop check pg query ?



>> use ceph-objectstore-tool to export the pg from osd.6, stop some other
>> ranodm osd (not one of these ones), import the pg into that osd, and start
>> again.  once it is up, 'ceph osd lost 6'.  the pg *should* peer at that
>> point.  repeat with the same basic process with the other pg.

> I have already did 'ceph osd lost 6', do I need to do this once again ?

/dev/sdb1       3,7T   34M  3,7T   1% /var/lib/ceph/osd/ceph-6

this disk have no data, they where migrated, when this osd was able to
be up.

-- 
Regards,
 Łukasz Chrustek