From mboxrd@z Thu Jan 1 00:00:00 1970 From: greg@kroah.com (Greg KH) Date: Fri, 14 Apr 2006 20:10:47 +0000 Subject: [lm-sensors] [PATCH 3/5] w83792d: Be quiet on misdetection Message-Id: <11450454472880-git-send-email-greg@kroah.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Make the w83792d driver keep quiet when misdetecting a chip. This can happen, and the user doesn't need to know. Also renumber the messages, and add one, for consistency. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83792d.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) ac987c1f65cedd98d953e14ba219db2f8cc009d4 diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 6865c64..958602e 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1161,7 +1161,7 @@ w83792d_detect(struct i2c_adapter *adapt bank. */ if (kind < 0) { if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) { - dev_warn(dev, "Detection failed at step 3\n"); + dev_dbg(dev, "Detection failed at step 1\n"); goto ERROR1; } val1 = w83792d_read_value(client, W83792D_REG_BANK); @@ -1170,6 +1170,7 @@ w83792d_detect(struct i2c_adapter *adapt if (!(val1 & 0x07)) { /* is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || ((val1 & 0x80) && (val2 != 0x5c))) { + dev_dbg(dev, "Detection failed at step 2\n"); goto ERROR1; } } @@ -1177,7 +1178,7 @@ w83792d_detect(struct i2c_adapter *adapt should match */ if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) { - dev_warn(dev, "Detection failed at step 5\n"); + dev_dbg(dev, "Detection failed at step 3\n"); goto ERROR1; } } -- 1.2.6