From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH 4/6] tg3: Add reset_phy parameter to chip reset functions
Date: Fri, 28 Apr 2006 16:36:08 -0700 [thread overview]
Message-ID: <1146267368.4780.17.camel@rh4> (raw)
Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With
the full chip reset during MAC address change, the automatic PHY reset
during chip reset will cause a link down and bonding will not work
properly as a result. With this reset_phy parameter, we can do a chip
reset without link down when changing MAC address or MTU.
Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0ccfb63..97e27d8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3544,7 +3544,7 @@ static irqreturn_t tg3_test_isr(int irq,
return IRQ_RETVAL(0);
}
-static int tg3_init_hw(struct tg3 *);
+static int tg3_init_hw(struct tg3 *, int);
static int tg3_halt(struct tg3 *, int, int);
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -3580,7 +3580,7 @@ static void tg3_reset_task(void *_data)
tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 1);
tg3_netif_start(tp);
@@ -4055,7 +4055,7 @@ static int tg3_change_mtu(struct net_dev
tg3_set_mtu(dev, tp, new_mtu);
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 0);
tg3_netif_start(tp);
@@ -5740,7 +5740,7 @@ static int tg3_set_mac_addr(struct net_d
tg3_full_lock(tp, 1);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 0);
tg3_netif_start(tp);
tg3_full_unlock(tp);
@@ -5798,7 +5798,7 @@ static void __tg3_set_coalesce(struct tg
}
/* tp->lock is held. */
-static int tg3_reset_hw(struct tg3 *tp)
+static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
{
u32 val, rdmac_mode;
int i, err, limit;
@@ -5813,7 +5813,7 @@ static int tg3_reset_hw(struct tg3 *tp)
tg3_abort_hw(tp, 1);
}
- if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+ if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy)
tg3_phy_reset(tp);
err = tg3_chip_reset(tp);
@@ -6354,7 +6354,7 @@ static int tg3_reset_hw(struct tg3 *tp)
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
}
- err = tg3_setup_phy(tp, 1);
+ err = tg3_setup_phy(tp, reset_phy);
if (err)
return err;
@@ -6427,7 +6427,7 @@ static int tg3_reset_hw(struct tg3 *tp)
/* Called at device open time to get the chip ready for
* packet processing. Invoked with tp->lock held.
*/
-static int tg3_init_hw(struct tg3 *tp)
+static int tg3_init_hw(struct tg3 *tp, int reset_phy)
{
int err;
@@ -6440,7 +6440,7 @@ static int tg3_init_hw(struct tg3 *tp)
tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
- err = tg3_reset_hw(tp);
+ err = tg3_reset_hw(tp, reset_phy);
out:
return err;
@@ -6710,7 +6710,7 @@ static int tg3_test_msi(struct tg3 *tp)
tg3_full_lock(tp, 1);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- err = tg3_init_hw(tp);
+ err = tg3_init_hw(tp, 1);
tg3_full_unlock(tp);
@@ -6775,7 +6775,7 @@ static int tg3_open(struct net_device *d
tg3_full_lock(tp, 0);
- err = tg3_init_hw(tp);
+ err = tg3_init_hw(tp, 1);
if (err) {
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
@@ -7866,7 +7866,7 @@ static int tg3_set_ringparam(struct net_
if (netif_running(dev)) {
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 1);
tg3_netif_start(tp);
}
@@ -7911,7 +7911,7 @@ static int tg3_set_pauseparam(struct net
if (netif_running(dev)) {
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 1);
tg3_netif_start(tp);
}
@@ -8549,7 +8549,7 @@ static int tg3_test_loopback(struct tg3
if (!netif_running(tp->dev))
return TG3_LOOPBACK_FAILED;
- tg3_reset_hw(tp);
+ tg3_reset_hw(tp, 1);
if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
err |= TG3_MAC_LOOPBACK_FAILED;
@@ -8623,7 +8623,7 @@ static void tg3_self_test(struct net_dev
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
if (netif_running(dev)) {
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 1);
tg3_netif_start(tp);
}
@@ -11599,7 +11599,7 @@ static int tg3_suspend(struct pci_dev *p
tg3_full_lock(tp, 0);
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 1);
tp->timer.expires = jiffies + tp->timer_offset;
add_timer(&tp->timer);
@@ -11633,7 +11633,7 @@ static int tg3_resume(struct pci_dev *pd
tg3_full_lock(tp, 0);
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
- tg3_init_hw(tp);
+ tg3_init_hw(tp, 1);
tp->timer.expires = jiffies + tp->timer_offset;
add_timer(&tp->timer);
next reply other threads:[~2006-04-29 1:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-28 23:36 Michael Chan [this message]
2006-04-30 1:59 ` [PATCH 4/6] tg3: Add reset_phy parameter to chip reset functions David S. Miller
2006-05-01 15:19 ` Michael Chan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1146267368.4780.17.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.