All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: balbir@in.ibm.com
Cc: linux-kernel@vger.kernel.org, lse-tech@lists.sourceforge.net,
	jlan@engr.sgi.com, akpm@osdl.org
Subject: Re: [updated] [Patch 6/8] delay accounting usage of taskstats interface
Date: Tue, 09 May 2006 11:46:48 +0000	[thread overview]
Message-ID: <1147175208.7392.40.camel@localhost.localdomain> (raw)
In-Reply-To: <20060504184442.GC6966@in.ibm.com>

On Fri, 2006-05-05 at 00:14 +0530, Balbir Singh wrote:

>  #else
>  static inline void delayacct_set_flag(int flag)
>  {}

Please make this

static inline void delayacct_set_flag(int flag) { }

Same in all other files

> @@ -89,6 +99,9 @@ static inline void delayacct_blkio_start
>  {}
>  static inline void delayacct_blkio_end(void)
>  {}
> +static inline int delayacct_add_tsk(struct taskstats *d,
> +					struct task_struct *tsk)
> +{ return 0; }

{
	return 0;
}

> +	 *
> +	 * xxx_count is the number of delay values recorded
> +	 * xxx_delay_total is the corresponding cumulative delay in nanoseconds
> +	 *
> +	 * xxx_delay_total wraps around to zero on overflow
> +	 * xxx_count incremented regardless of overflow
> +	 */

Please use a structure for that.

struct delay_account {
	ktime_t delay;
	u64 count;
};

Also instead of having tons of fields added, please use something like

enum {
	CPU_ACCT,
	BLKIO_ACCT,
	....,
	MAX_ACCT_TYPES
};
	struct delay_account stats[MAX_ACCT_TYPES];


> +	/* Delay waiting for cpu, while runnable
> +	 * count, delay_total NOT updated atomically
> +	 */
> +	__u64	cpu_count;
> +	__u64	cpu_delay_total;
> +	/* Following four fields atomically updated using task->delays->lock */
> +
> +	/* Delay waiting for synchronous block I/O to complete
> +	 * does not account for delays in I/O submission
> +	 */
> +	__u64	blkio_count;
> +	__u64	blkio_delay_total;
> +
> +	/* Delay waiting for page fault I/O (swap in only) */
> +	__u64	swapin_count;
> +	__u64	swapin_delay_total;
> +
> +	/* cpu "wall-clock" running time
> +	 * On some architectures, value will adjust for cpu time stolen
> +	 * from the kernel in involuntary waits due to virtualization.
> +	 * Value is cumulative, in nanoseconds, without a corresponding count
> +	 * and wraps around to zero silently on overflow

When will this overflow happen ? 2^64 nsec ~= 584 years


> +int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
> +{

Please add some comment what this code does.

> +	s64 tmp;
> +	struct timespec ts;
> +	unsigned long t1,t2,t3;
> +
> +	tmp = (s64)d->cpu_run_real_total;
> +	tmp += (u64)(tsk->utime + tsk->stime) * TICK_NSEC;
> +	d->cpu_run_real_total = (tmp < (s64)d->cpu_run_real_total) ? 0 : tmp;
> +
> +	/*
> +	 * No locking available for sched_info (and too expensive to add one)
> +	 * Mitigate by taking snapshot of values
> +	 */
> +	t1 = tsk->sched_info.pcnt;
> +	t2 = tsk->sched_info.run_delay;
> +	t3 = tsk->sched_info.cpu_time;
> +
> +	d->cpu_count += t1;
> +
> +	jiffies_to_timespec(t2, &ts);
> +	tmp = (s64)d->cpu_delay_total + timespec_to_ns(&ts);
> +	d->cpu_delay_total = (tmp < (s64)d->cpu_delay_total) ? 0 : tmp;
> +
> +	tmp = (s64)d->cpu_run_virtual_total + (s64)jiffies_to_usecs(t3) * 1000;
> +	d->cpu_run_virtual_total =
> +		(tmp < (s64)d->cpu_run_virtual_total) ?	0 : tmp;
> +
> +	/* zero XXX_total, non-zero XXX_count implies XXX stat overflowed */
> +
> +	spin_lock(&tsk->delays->lock);
> +	tmp = d->blkio_delay_total + tsk->delays->blkio_delay;
> +	d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;

I really do not get whatfor all these comparisons are. How can those
values get > 2^63 within a reasonable timeframe ?

> +	tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
> +	d->swapin_delay_total = (tmp < d->swapin_delay_total) ? 0 : tmp;
> +	d->blkio_count += tsk->delays->blkio_count;
> +	d->swapin_count += tsk->delays->swapin_count;
> +	spin_unlock(&tsk->delays->lock);
> +	return 0;
> +}
> diff -puN kernel/taskstats.c~delayacct-taskstats kernel/taskstats.c
> --- linux-2.6.17-rc3/kernel/taskstats.c~delayacct-taskstats	2006-05-04 09:31:59.000000000 +0530
> +++ linux-2.6.17-rc3-balbir/kernel/taskstats.c	2006-05-04 11:27:53.000000000 +0530
> @@ -18,6 +18,7 @@
>  
>  #include <linux/kernel.h>
>  #include <linux/taskstats_kern.h>
> +#include <linux/delayacct.h>
>  #include <net/genetlink.h>
>  #include <asm/atomic.h>
>  
> @@ -120,7 +121,10 @@ static int fill_pid(pid_t pid, struct ta
>  	 *		goto err;
>  	 */
>  
> -err:
> +	rc = delayacct_add_tsk(stats, tsk);
> +	stats->version = TASKSTATS_VERSION;
> +
> +	/* Define err: label here if needed */

Please remove that comment. The err label goes to a place where it makes
sense.

>  	put_task_struct(tsk);
>  	return rc;
>  
> @@ -152,8 +156,14 @@ static int fill_tgid(pid_t tgid, struct 
>  		 *		break;
>  		 */
>  
> +		rc = delayacct_add_tsk(stats, tsk);
> +		if (rc)
> +			break;
> +
>  	} while_each_thread(first, tsk);
>  	read_unlock(&tasklist_lock);
> +	stats->version = TASKSTATS_VERSION;
> +
>  
>  	/*
>  	 * Accounting subsytems can also add calls here if they don't
> _
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/


  reply	other threads:[~2006-05-09  9:46 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-02  6:19 [Patch 6/8] delay accounting usage of taskstats interface Balbir Singh
2006-05-04  2:13 ` [Lse-tech] " Jay Lan
2006-05-04  4:23   ` Balbir Singh
2006-05-04 18:44 ` [updated] " Balbir Singh
2006-05-09 11:46   ` Thomas Gleixner [this message]
2006-05-09 17:11     ` Balbir Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1147175208.7392.40.camel@localhost.localdomain \
    --to=tglx@linutronix.de \
    --cc=akpm@osdl.org \
    --cc=balbir@in.ibm.com \
    --cc=jlan@engr.sgi.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lse-tech@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.