All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, axboe@suse.de,
	albertcc@tw.ibm.com, forrest.zhao@intel.com, efalk@google.com,
	linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 01/11] libata-eh: add ATA and libata flags for new EH
Date: Thu, 11 May 2006 22:21:27 +0900	[thread overview]
Message-ID: <1147353687598-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11473536873966-git-send-email-htejun@gmail.com>

Add ATA and libata flags to be used by new EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 include/linux/ata.h    |   13 +++++++++++++
 include/linux/libata.h |    8 ++++++++
 2 files changed, 21 insertions(+), 0 deletions(-)

f39425fcb9c479e87113475fd214728caebe0c78
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 312a2c0..a7c41f3 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -97,6 +97,9 @@ enum {
 	ATA_DRQ			= (1 << 3),	/* data request i/o */
 	ATA_ERR			= (1 << 0),	/* have an error */
 	ATA_SRST		= (1 << 2),	/* software reset */
+	ATA_ICRC		= (1 << 7),	/* interface CRC error */
+	ATA_UNC			= (1 << 6),	/* uncorrectable media error */
+	ATA_IDNF		= (1 << 4),	/* ID not found */
 	ATA_ABORTED		= (1 << 2),	/* command aborted */
 
 	/* ATA command block registers */
@@ -192,6 +195,16 @@ enum {
 	SCR_ACTIVE		= 3,
 	SCR_NOTIFICATION	= 4,
 
+	/* SError bits */
+	SERR_DATA_RECOVERED	= (1 << 0), /* recovered data error */
+	SERR_COMM_RECOVERED	= (1 << 1), /* recovered comm failure */
+	SERR_DATA		= (1 << 8), /* unrecovered data error */
+	SERR_PERSISTENT		= (1 << 9), /* persistent data/comm error */
+	SERR_PROTOCOL		= (1 << 10), /* protocol violation */
+	SERR_INTERNAL		= (1 << 11), /* host internal error */
+	SERR_PHYRDY_CHG		= (1 << 16), /* PHY RDY changed */
+	SERR_DEV_XCHG		= (1 << 26), /* device exchanged */
+
 	/* struct ata_taskfile flags */
 	ATA_TFLAG_LBA48		= (1 << 0), /* enable 48-bit LBA and "HOB" */
 	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e4353cf..80c8f0e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -155,6 +155,7 @@ enum {
 
 	ATA_FLAG_EH_PENDING	= (1 << 16), /* EH pending */
 	ATA_FLAG_FROZEN		= (1 << 17), /* port is frozen */
+	ATA_FLAG_RECOVERED	= (1 << 18), /* recovery action performed */
 
 	ATA_FLAG_DISABLED	= (1 << 22), /* port is disabled, ignore it */
 	ATA_FLAG_SUSPENDED	= (1 << 23), /* port is suspended (power) */
@@ -225,6 +226,13 @@ enum {
 	ATA_PORT_PRIMARY	= (1 << 0),
 	ATA_PORT_SECONDARY	= (1 << 1),
 
+	/* reset / recovery action types */
+	ATA_EH_REVALIDATE	= (1 << 0),
+	ATA_EH_SOFTRESET	= (1 << 1),
+	ATA_EH_HARDRESET	= (1 << 2),
+
+	ATA_EH_RESET_MASK	= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
+
 	/* max repeat if error condition is still set after ->error_handler */
 	ATA_EH_MAX_REPEAT	= 5,
 
-- 
1.2.4



  parent reply	other threads:[~2006-05-11 13:21 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-11 13:21 [PATCHSET 03/11] new EH implementation, take 3 Tejun Heo
2006-05-11 13:21 ` [PATCH 04/11] libata-eh: implement ata_eh_info and ata_eh_context Tejun Heo
2006-05-11 13:21 ` [PATCH 02/11] libata-eh: implement ata_ering Tejun Heo
2006-05-13 22:16   ` Jeff Garzik
2006-05-13 23:36     ` Tejun Heo
2006-05-14  1:05       ` Jeff Garzik
2006-05-14  1:20         ` Tejun Heo
2006-05-14  1:32           ` Jeff Garzik
2006-05-14  1:38             ` Tejun Heo
2006-05-15 13:36             ` Alan Cox
2006-05-15 14:00               ` Tejun Heo
2006-05-15 14:25                 ` Tejun Heo
2006-05-15 14:50                   ` Alan Cox
2006-05-15 14:57                     ` Tejun Heo
2006-05-15 15:19                       ` Alan Cox
2006-05-15 15:19                         ` Tejun Heo
2006-05-15 18:22                           ` Jeff Garzik
2006-05-11 13:21 ` Tejun Heo [this message]
2006-05-13 22:15   ` [PATCH 01/11] libata-eh: add ATA and libata flags for new EH Jeff Garzik
2006-05-11 13:21 ` [PATCH 03/11] libata-eh: add per-dev ata_ering Tejun Heo
2006-05-11 13:21 ` [PATCH 06/11] libata-eh: implement BMDMA EH Tejun Heo
2006-05-13 22:21   ` Jeff Garzik
2006-05-13 23:41     ` Tejun Heo
2006-05-15 13:38       ` Alan Cox
2006-05-15 13:59         ` Tejun Heo
2006-05-15 14:43           ` Alan Cox
2006-05-11 13:21 ` [PATCH 05/11] libata-eh: implement new EH Tejun Heo
2006-05-13 22:19   ` Jeff Garzik
2006-05-11 13:21 ` [PATCH 08/11] sata_sil: convert to " Tejun Heo
2006-05-11 14:22   ` Alan Cox
2006-05-11 14:39     ` Tejun Heo
2006-05-11 15:46       ` Alan Cox
2006-05-11 15:45         ` Tejun Heo
2006-05-11 16:12           ` Alan Cox
2006-05-11 16:10             ` Tejun Heo
2006-05-11 17:16               ` Alan Cox
2006-05-13 22:26   ` Jeff Garzik
2006-05-13 23:43     ` Tejun Heo
2006-05-11 13:21 ` [PATCH 07/11] ata_piix: " Tejun Heo
2006-05-13 22:23   ` Jeff Garzik
2006-05-11 13:21 ` [PATCH 11/11] sata_sil24: " Tejun Heo
2006-05-11 13:21 ` [PATCH 09/11] ahci: " Tejun Heo
2006-05-13 10:53   ` Tejun Heo
2006-05-13 22:30   ` Jeff Garzik
2006-05-13 23:49     ` Tejun Heo
2006-05-11 13:21 ` [PATCH 10/11] ahci: add PIOS interim interrupt handling Tejun Heo
2006-05-13 22:34 ` [PATCHSET 03/11] new EH implementation, take 3 Jeff Garzik
2006-05-13 23:58   ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1147353687598-git-send-email-htejun@gmail.com \
    --to=htejun@gmail.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertcc@tw.ibm.com \
    --cc=axboe@suse.de \
    --cc=efalk@google.com \
    --cc=forrest.zhao@intel.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.