All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, mlord@pobox.com, albertcc@tw.ibm.com,
	alan@lxorguk.ukuu.org.uk, axboe@suse.de, forrest.zhao@intel.com,
	linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 03/12] libata-hp-prep: make some ata_device fields persistent
Date: Wed, 31 May 2006 20:05:41 +0900	[thread overview]
Message-ID: <11490735411294-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1149073540186-git-send-email-htejun@gmail.com>

Lifetimes of some fields span over device plugging/unplugging.  This
patch moves such persistent fields to the top of ata_device and
separate them with ATA_DEVICE_CLEAR_OFFSET.  Fields above the offset
are initialized once during host initializatino while all other fields
are cleared before hotplugging.  Currently ->ap, devno and part of
flags are persistent.

Note that flags is partially cleared while holding host_set lock.
This is to synchronize with later warm plug implementation which will
record hotplug request in dev->flags.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/libata-core.c |   14 ++++++++++++--
 include/linux/libata.h     |   11 +++++++++--
 2 files changed, 21 insertions(+), 4 deletions(-)

72fa4b742b327bd1b07985d79a61c61dbd9fd4e6
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 8fda822..a07ab77 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5153,9 +5153,18 @@ static void ata_host_remove(struct ata_p
 void ata_dev_init(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->ap;
+	unsigned long flags;
+
+	/* High bits of dev->flags are used to record warm plug
+	 * requests which occur asynchronously.  Synchronize using
+	 * host_set lock.
+	 */
+	spin_lock_irqsave(&ap->host_set->lock, flags);
+	dev->flags &= ~ATA_DFLAG_INIT_MASK;
+	spin_unlock_irqrestore(&ap->host_set->lock, flags);
 
-	memset((void *)dev, 0, sizeof(*dev));
-	dev->devno = dev - ap->device;
+	memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
+	       sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
 	dev->pio_mask = UINT_MAX;
 	dev->mwdma_mask = UINT_MAX;
 	dev->udma_mask = UINT_MAX;
@@ -5218,6 +5227,7 @@ static void ata_host_init(struct ata_por
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
 		dev->ap = ap;
+		dev->devno = i;
 		ata_dev_init(dev);
 	}
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index d4a668c..aa14eda 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -130,6 +130,7 @@ enum {
 	ATA_DFLAG_CFG_MASK	= (1 << 8) - 1,
 
 	ATA_DFLAG_PIO		= (1 << 8), /* device currently in PIO mode */
+	ATA_DFLAG_INIT_MASK	= (1 << 16) - 1,
 
 	ATA_DFLAG_DETACH	= (1 << 16),
 	ATA_DFLAG_DETACHED	= (1 << 17),
@@ -410,10 +411,11 @@ struct ata_ering {
 
 struct ata_device {
 	struct ata_port		*ap;
-	u64			n_sectors;	/* size of device, if ATA */
+	unsigned int		devno;		/* 0 or 1 */
 	unsigned long		flags;		/* ATA_DFLAG_xxx */
+	/* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
+	u64			n_sectors;	/* size of device, if ATA */
 	unsigned int		class;		/* ATA_DEV_xxx */
-	unsigned int		devno;		/* 0 or 1 */
 	u16			id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
 	u8			pio_mode;
 	u8			dma_mode;
@@ -439,6 +441,11 @@ struct ata_device {
 	struct ata_ering	ering;
 };
 
+/* Offset into struct ata_device.  Fields above it are maintained
+ * acress device init.  Fields below are zeroed.
+ */
+#define ATA_DEVICE_CLEAR_OFFSET		offsetof(struct ata_device, n_sectors)
+
 struct ata_eh_info {
 	struct ata_device	*dev;		/* offending device */
 	u32			serror;		/* SError from LLDD */
-- 
1.3.2



  parent reply	other threads:[~2006-05-31 11:05 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-31 11:05 [PATCHSET 01/03] prep for hotplug support, take 5 Tejun Heo
2006-05-31 11:05 ` [PATCH 06/12] libata-hp-prep: implement ap->hw_sata_spd_limit Tejun Heo
2006-05-31 11:05 ` Tejun Heo [this message]
2006-05-31 11:05 ` [PATCH 01/12] libata-hp-prep: add flags and eh_info/context fields for hotplug Tejun Heo
2006-05-31 11:05 ` [PATCH 02/12] libata-hp-prep: implement ata_dev_init() Tejun Heo
2006-05-31 11:05 ` [PATCH 04/12] libata-hp-prep: update ata_scsi_find_dev() and friends Tejun Heo
2006-05-31 11:05 ` [PATCH 05/12] libata-hp-prep: use __ata_scsi_find_dev() Tejun Heo
2006-05-31 11:05 ` [PATCH 11/12] libata-hp-prep: add prereset() method and implement ata_std_prereset() Tejun Heo
2006-05-31 11:05 ` [PATCH 07/12] libata-hp-prep: store attached SCSI device Tejun Heo
2006-05-31 11:05 ` [PATCH 08/12] libata-hp-prep: add ata_aux_wq Tejun Heo
2006-05-31 11:05 ` [PATCH 10/12] libata-hp-prep: implement sata_phy_debounce() Tejun Heo
2006-05-31 11:05 ` [PATCH 09/12] libata-hp-prep: make probing related functions global Tejun Heo
2006-05-31 11:05 ` [PATCH 12/12] libata-hp-prep: implement followup softreset handling Tejun Heo
2006-05-31 11:08 ` [PATCHSET 01/03] prep for hotplug support, take 5 Tejun Heo
2006-06-08 20:52 ` Jeff Garzik
  -- strict thread matches above, loose matches on Subject: below --
2006-05-29  6:25 [PATCHSET 01/03] prep for hotplug support, take 4 Tejun Heo
2006-05-29  6:25 ` [PATCH 03/12] libata-hp-prep: make some ata_device fields persistent Tejun Heo
2006-05-30  4:00   ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11490735411294-git-send-email-htejun@gmail.com \
    --to=htejun@gmail.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertcc@tw.ibm.com \
    --cc=axboe@suse.de \
    --cc=forrest.zhao@intel.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=mlord@pobox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.