From: Paul Fulghum <paulkf@microgate.com>
To: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Krzysztof Halasa <khc@pm.waw.pl>,
davej@redhat.com, akpm@osdl.org, linux-kernel@vger.kernel.org,
zippel@linux-m68k.org
Subject: Re: [PATCH] fix missing hdlc symbols for synclink drivers
Date: Tue, 06 Jun 2006 18:22:22 -0500 [thread overview]
Message-ID: <1149636142.2633.13.camel@localhost.localdomain> (raw)
In-Reply-To: <20060606160745.2f88ff9c.rdunlap@xenotime.net>
On Tue, 2006-06-06 at 16:07 -0700, Randy.Dunlap wrote:
> On Wed, 07 Jun 2006 00:44:09 +0200 Krzysztof Halasa wrote:
> > Are you sure it's not a corrupted build tree or something like that?
> > Can I have a look at the complete .config? Or some other bugzilla #?
>
> I did a make mrproper and got the same results.
> I'm on x86-64 if it matters.
> My .config is attached.
I just completed some builds including the setup you
indicated (though not your exact .config, which I will try next).
I'm also building x86-64.
Everything builds correctly using your patch, but
without the Makefile portion, so we can drop that.
It builds for
CONFIG_HDLC=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINK_HDLC=y
(all modules)
and
CONFIG_HDLC=m
CONFIG_SYNCLINK=y
CONFIG_SYNCLINK_HDLC=y
(all built-in, hdlc promoted to 'y')
--
Paul
next prev parent reply other threads:[~2006-06-06 23:22 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-04 6:20 2.6.17-rc5-mm3 Andrew Morton
2006-06-04 9:38 ` 2.6.17-rc5-mm3 Barry K. Nathan
2006-06-04 9:49 ` 2.6.17-rc5-mm3 Andrew Morton
2006-06-04 10:08 ` 2.6.17-rc5-mm3 Michal Piotrowski
2006-06-04 10:41 ` 2.6.17-rc5-mm3 Ingo Molnar
2006-06-04 20:38 ` 2.6.17-rc5-mm3 Valdis.Kletnieks
2006-06-04 21:49 ` [patch, -rc5-mm3] lock validator: early_init_irq_lock_type() build fix Ingo Molnar
[not found] ` <6bffcb0e0606040407u4f56f7fdyf5ec479314afc082@mail.gmail.com>
2006-06-04 21:38 ` 2.6.17-rc5-mm3 Ingo Molnar
2006-06-04 22:35 ` 2.6.17-rc5-mm3 Michal Piotrowski
2006-06-05 8:30 ` [patch, -rc5-mm3] fix IDE deadlock in error reporting code Ingo Molnar
2006-06-05 8:35 ` Ingo Molnar
2006-06-05 11:33 ` Michal Piotrowski
2006-06-05 12:24 ` Ingo Molnar
2006-06-05 12:35 ` Michal Piotrowski
2006-06-04 18:20 ` 2.6.17-rc5-mm3 Rafael J. Wysocki
2006-06-04 23:01 ` [trivial patch, rc5-mm3] fix typo in acpi pm info message Frederik Deweerdt
2006-06-04 23:15 ` 2.6.17-rc5-mm3 J.A. Magallón
2006-06-04 23:42 ` 2.6.17-rc5-mm3 Andrew Morton
2006-06-05 6:02 ` 2.6.17-rc5-mm3 Valdis.Kletnieks
2006-06-05 8:04 ` 2.6.17-rc5-mm3 Arjan van de Ven
2006-06-04 23:28 ` 2.6.17-rc5-mm3 J.A. Magallón
2006-06-05 0:06 ` 2.6.17-rc5-mm3 Barry K. Nathan
2006-06-05 0:25 ` 2.6.17-rc5-mm3 Grant Coady
2006-06-05 0:45 ` 2.6.17-rc5-mm3 Grant Coady
2006-06-05 9:12 ` 2.6.17-rc5-mm3 Ingo Molnar
2006-06-05 17:56 ` 2.6.17-rc5-mm3 Mel Gorman
2006-06-05 18:54 ` 2.6.17-rc5-mm3 Andrew Morton
2006-06-06 9:43 ` 2.6.17-rc5-mm3 Mel Gorman
2006-06-06 10:57 ` 2.6.17-rc5-mm3 Mel Gorman
2006-06-05 19:48 ` 2.6.17-rc5-mm3 Dave Jones
2006-06-05 20:06 ` 2.6.17-rc5-mm3 Andrew Morton
2006-06-05 20:09 ` 2.6.17-rc5-mm3 Dave Jones
2006-06-05 20:44 ` 2.6.17-rc5-mm3 Dave Jones
2006-06-05 20:53 ` 2.6.17-rc5-mm3 Andrew Morton
2006-06-05 21:02 ` 2.6.17-rc5-mm3 Dave Jones
2006-06-05 21:03 ` 2.6.17-rc5-mm3 Arjan van de Ven
2006-06-06 10:15 ` 2.6.17-rc5-mm3 Takashi Iwai
2006-06-05 23:02 ` 2.6.17-rc5-mm3 Dave Jones
2006-06-06 1:44 ` 2.6.17-rc5-mm3 Randy.Dunlap
2006-06-06 1:54 ` 2.6.17-rc5-mm3 Paul Fulghum
2006-06-06 2:03 ` 2.6.17-rc5-mm3 Randy.Dunlap
2006-06-06 2:19 ` 2.6.17-rc5-mm3 Randy.Dunlap
2006-06-06 2:35 ` 2.6.17-rc5-mm3 Paul Fulghum
2006-06-06 13:30 ` 2.6.17-rc5-mm3 Paul Fulghum
2006-06-06 19:40 ` [PATCH] fix missing hdlc symbols for synclink drivers Paul Fulghum
2006-06-06 20:27 ` Krzysztof Halasa
2006-06-06 20:35 ` Paul Fulghum
2006-06-06 21:09 ` Krzysztof Halasa
2006-06-06 21:20 ` Randy.Dunlap
2006-06-06 21:31 ` Krzysztof Halasa
2006-06-06 21:43 ` Paul Fulghum
2006-06-06 20:45 ` Randy.Dunlap
2006-06-06 20:48 ` Randy.Dunlap
2006-06-06 21:08 ` Randy.Dunlap
2006-06-06 22:44 ` Krzysztof Halasa
2006-06-06 22:52 ` Paul Fulghum
2006-06-06 23:07 ` Randy.Dunlap
2006-06-06 23:22 ` Paul Fulghum [this message]
2006-06-06 23:37 ` Krzysztof Halasa
2006-06-06 23:51 ` Randy.Dunlap
2006-06-06 23:56 ` Paul Fulghum
2006-06-07 0:12 ` Randy.Dunlap
2006-06-07 0:31 ` Paul Fulghum
2006-06-07 1:20 ` Remove patch from 2.6.17-rc5-mm3 Paul Fulghum
2006-06-07 0:42 ` [PATCH] fix missing hdlc symbols for synclink drivers Krzysztof Halasa
2006-06-07 1:09 ` Paul Fulghum
2006-06-06 23:11 ` Randy.Dunlap
2006-06-06 21:11 ` Krzysztof Halasa
2006-06-06 21:25 ` Randy.Dunlap
2006-06-06 8:03 ` 2.6.17-rc5-mm3 J.A. Magallón
2006-06-06 8:09 ` [patch, -rc5-mm3] lock validator: add local_irq_enable_in_hardirq() to ide-floppy.c Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1149636142.2633.13.camel@localhost.localdomain \
--to=paulkf@microgate.com \
--cc=akpm@osdl.org \
--cc=davej@redhat.com \
--cc=khc@pm.waw.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@xenotime.net \
--cc=zippel@linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.