From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH 2.6.18 4/6] bnx2: Add firmware decompression
Date: Mon, 12 Jun 2006 17:17:18 -0700 [thread overview]
Message-ID: <1150157838.26173.9.camel@rh4> (raw)
Add functions to decompress firmware before loading to the internal
CPUs. Compressing the firmware reduces the driver size significantly.
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bdaaad8..1fb0a19 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2163,6 +2163,8 @@ config TIGON3
config BNX2
tristate "Broadcom NetXtremeII support"
depends on PCI
+ select CRC32
+ select ZLIB_INFLATE
help
This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 7a3d888..3b1fe1e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -50,6 +50,7 @@
#include <linux/crc32.h>
#include <linux/prefetch.h>
#include <linux/cache.h>
+#include <linux/zlib.h>
#include "bnx2.h"
#include "bnx2_fw.h"
@@ -2084,6 +2085,92 @@ bnx2_set_rx_mode(struct net_device *dev)
spin_unlock_bh(&bp->phy_lock);
}
+#define FW_BUF_SIZE 0x8000
+
+static int
+bnx2_gunzip_init(struct bnx2 *bp)
+{
+ if ((bp->gunzip_buf = vmalloc(FW_BUF_SIZE)) == NULL)
+ goto gunzip_nomem1;
+
+ if ((bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL)) == NULL)
+ goto gunzip_nomem2;
+
+ bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
+ if (bp->strm->workspace == NULL)
+ goto gunzip_nomem3;
+
+ return 0;
+
+gunzip_nomem3:
+ kfree(bp->strm);
+ bp->strm = NULL;
+
+gunzip_nomem2:
+ vfree(bp->gunzip_buf);
+ bp->gunzip_buf = NULL;
+
+gunzip_nomem1:
+ printk(KERN_ERR PFX "%s: Cannot allocate firmware buffer for "
+ "uncompression.\n", bp->dev->name);
+ return -ENOMEM;
+}
+
+static void
+bnx2_gunzip_end(struct bnx2 *bp)
+{
+ kfree(bp->strm->workspace);
+
+ kfree(bp->strm);
+ bp->strm = NULL;
+
+ if (bp->gunzip_buf) {
+ vfree(bp->gunzip_buf);
+ bp->gunzip_buf = NULL;
+ }
+}
+
+static int
+bnx2_gunzip(struct bnx2 *bp, u8 *zbuf, int len, void **outbuf, int *outlen)
+{
+ int n, rc;
+
+ /* check gzip header */
+ if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED))
+ return -EINVAL;
+
+ n = 10;
+
+#define FNAME 0x8
+ if (zbuf[3] & FNAME)
+ while (zbuf[n++] != 0);
+
+ bp->strm->next_in = zbuf + n;
+ bp->strm->avail_in = len - n;
+ bp->strm->next_out = bp->gunzip_buf;
+ bp->strm->avail_out = FW_BUF_SIZE;
+
+ rc = zlib_inflateInit2(bp->strm, -MAX_WBITS);
+ if (rc != Z_OK)
+ return rc;
+
+ rc = zlib_inflate(bp->strm, Z_FINISH);
+
+ *outlen = FW_BUF_SIZE - bp->strm->avail_out;
+ *outbuf = bp->gunzip_buf;
+
+ if ((rc != Z_OK) && (rc != Z_STREAM_END))
+ printk(KERN_ERR PFX "%s: Firmware decompression error: %s\n",
+ bp->dev->name, bp->strm->msg);
+
+ zlib_inflateEnd(bp->strm);
+
+ if (rc == Z_STREAM_END)
+ return 0;
+
+ return rc;
+}
+
static void
load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_code, u32 rv2p_code_len,
u32 rv2p_proc)
@@ -2093,9 +2180,9 @@ load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_
for (i = 0; i < rv2p_code_len; i += 8) {
- REG_WR(bp, BNX2_RV2P_INSTR_HIGH, *rv2p_code);
+ REG_WR(bp, BNX2_RV2P_INSTR_HIGH, cpu_to_le32(*rv2p_code));
rv2p_code++;
- REG_WR(bp, BNX2_RV2P_INSTR_LOW, *rv2p_code);
+ REG_WR(bp, BNX2_RV2P_INSTR_LOW, cpu_to_le32(*rv2p_code));
rv2p_code++;
if (rv2p_proc == RV2P_PROC1) {
@@ -2135,7 +2222,7 @@ load_cpu_fw(struct bnx2 *bp, struct cpu_
int j;
for (j = 0; j < (fw->text_len / 4); j++, offset += 4) {
- REG_WR_IND(bp, offset, fw->text[j]);
+ REG_WR_IND(bp, offset, cpu_to_le32(fw->text[j]));
}
}
@@ -2191,15 +2278,32 @@ load_cpu_fw(struct bnx2 *bp, struct cpu_
REG_WR_IND(bp, cpu_reg->mode, val);
}
-static void
+static int
bnx2_init_cpus(struct bnx2 *bp)
{
struct cpu_reg cpu_reg;
struct fw_info fw;
+ int rc = 0;
+ void *text;
+ u32 text_len;
+
+ if ((rc = bnx2_gunzip_init(bp)) != 0)
+ return rc;
/* Initialize the RV2P processor. */
- load_rv2p_fw(bp, bnx2_rv2p_proc1, sizeof(bnx2_rv2p_proc1), RV2P_PROC1);
- load_rv2p_fw(bp, bnx2_rv2p_proc2, sizeof(bnx2_rv2p_proc2), RV2P_PROC2);
+ rc = bnx2_gunzip(bp, bnx2_rv2p_proc1, sizeof(bnx2_rv2p_proc1), &text,
+ &text_len);
+ if (rc)
+ goto init_cpu_err;
+
+ load_rv2p_fw(bp, text, text_len, RV2P_PROC1);
+
+ rc = bnx2_gunzip(bp, bnx2_rv2p_proc2, sizeof(bnx2_rv2p_proc2), &text,
+ &text_len);
+ if (rc)
+ goto init_cpu_err;
+
+ load_rv2p_fw(bp, text, text_len, RV2P_PROC2);
/* Initialize the RX Processor. */
cpu_reg.mode = BNX2_RXP_CPU_MODE;
@@ -2223,7 +2327,13 @@ bnx2_init_cpus(struct bnx2 *bp)
fw.text_addr = bnx2_RXP_b06FwTextAddr;
fw.text_len = bnx2_RXP_b06FwTextLen;
fw.text_index = 0;
- fw.text = bnx2_RXP_b06FwText;
+
+ rc = bnx2_gunzip(bp, bnx2_RXP_b06FwText, sizeof(bnx2_RXP_b06FwText),
+ &text, &text_len);
+ if (rc)
+ goto init_cpu_err;
+
+ fw.text = text;
fw.data_addr = bnx2_RXP_b06FwDataAddr;
fw.data_len = bnx2_RXP_b06FwDataLen;
@@ -2269,7 +2379,13 @@ bnx2_init_cpus(struct bnx2 *bp)
fw.text_addr = bnx2_TXP_b06FwTextAddr;
fw.text_len = bnx2_TXP_b06FwTextLen;
fw.text_index = 0;
- fw.text = bnx2_TXP_b06FwText;
+
+ rc = bnx2_gunzip(bp, bnx2_TXP_b06FwText, sizeof(bnx2_TXP_b06FwText),
+ &text, &text_len);
+ if (rc)
+ goto init_cpu_err;
+
+ fw.text = text;
fw.data_addr = bnx2_TXP_b06FwDataAddr;
fw.data_len = bnx2_TXP_b06FwDataLen;
@@ -2315,7 +2431,13 @@ bnx2_init_cpus(struct bnx2 *bp)
fw.text_addr = bnx2_TPAT_b06FwTextAddr;
fw.text_len = bnx2_TPAT_b06FwTextLen;
fw.text_index = 0;
- fw.text = bnx2_TPAT_b06FwText;
+
+ rc = bnx2_gunzip(bp, bnx2_TPAT_b06FwText, sizeof(bnx2_TPAT_b06FwText),
+ &text, &text_len);
+ if (rc)
+ goto init_cpu_err;
+
+ fw.text = text;
fw.data_addr = bnx2_TPAT_b06FwDataAddr;
fw.data_len = bnx2_TPAT_b06FwDataLen;
@@ -2361,7 +2483,13 @@ bnx2_init_cpus(struct bnx2 *bp)
fw.text_addr = bnx2_COM_b06FwTextAddr;
fw.text_len = bnx2_COM_b06FwTextLen;
fw.text_index = 0;
- fw.text = bnx2_COM_b06FwText;
+
+ rc = bnx2_gunzip(bp, bnx2_COM_b06FwText, sizeof(bnx2_COM_b06FwText),
+ &text, &text_len);
+ if (rc)
+ goto init_cpu_err;
+
+ fw.text = text;
fw.data_addr = bnx2_COM_b06FwDataAddr;
fw.data_len = bnx2_COM_b06FwDataLen;
@@ -2385,6 +2513,9 @@ bnx2_init_cpus(struct bnx2 *bp)
load_cpu_fw(bp, &cpu_reg, &fw);
+init_cpu_err:
+ bnx2_gunzip_end(bp);
+ return rc;
}
static int
@@ -3257,7 +3388,9 @@ bnx2_init_chip(struct bnx2 *bp)
* context block must have already been enabled. */
bnx2_init_context(bp);
- bnx2_init_cpus(bp);
+ if ((rc = bnx2_init_cpus(bp)) != 0)
+ return rc;
+
bnx2_init_nvram(bp);
bnx2_set_mac_addr(bp);
@@ -3557,7 +3690,9 @@ bnx2_reset_nic(struct bnx2 *bp, u32 rese
if (rc)
return rc;
- bnx2_init_chip(bp);
+ if ((rc = bnx2_init_chip(bp)) != 0)
+ return rc;
+
bnx2_init_tx_ring(bp);
bnx2_init_rx_ring(bp);
return 0;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index de2b58c..768abca 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -4048,6 +4048,9 @@ struct bnx2 {
u32 flash_size;
int status_stats_size;
+
+ struct z_stream_s *strm;
+ void *gunzip_buf;
};
static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset);
next reply other threads:[~2006-06-13 0:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-13 0:17 Michael Chan [this message]
2006-06-13 0:38 ` [PATCH 2.6.18 4/6] bnx2: Add firmware decompression David Miller
2006-06-13 1:42 ` [PATCH 2.6.18 4/6 revised] " Michael Chan
2006-06-13 5:21 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1150157838.26173.9.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.