All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>, Kay Sievers <kay.sievers@suse.de>
Subject: [PATCH 2/22] [PATCH] Add kernel<->userspace ABI stability documentation
Date: Wed, 21 Jun 2006 12:45:45 -0700	[thread overview]
Message-ID: <11509191682051-git-send-email-greg@kroah.com> (raw)
In-Reply-To: <11509191652021-git-send-email-greg@kroah.com>

From: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/ABI/README                |   77 +++++++++++++++++++++++++++++++
 Documentation/ABI/obsolete/devfs        |   13 +++++
 Documentation/ABI/stable/syscalls       |   10 ++++
 Documentation/ABI/stable/sysfs-module   |   30 ++++++++++++
 Documentation/ABI/testing/sysfs-class   |   16 ++++++
 Documentation/ABI/testing/sysfs-devices |   25 ++++++++++
 6 files changed, 171 insertions(+), 0 deletions(-)

diff --git a/Documentation/ABI/README b/Documentation/ABI/README
new file mode 100644
index 0000000..9feaf16
--- /dev/null
+++ b/Documentation/ABI/README
@@ -0,0 +1,77 @@
+This directory attempts to document the ABI between the Linux kernel and
+userspace, and the relative stability of these interfaces.  Due to the
+everchanging nature of Linux, and the differing maturity levels, these
+interfaces should be used by userspace programs in different ways.
+
+We have four different levels of ABI stability, as shown by the four
+different subdirectories in this location.  Interfaces may change levels
+of stability according to the rules described below.
+
+The different levels of stability are:
+
+  stable/
+	This directory documents the interfaces that the developer has
+	defined to be stable.  Userspace programs are free to use these
+	interfaces with no restrictions, and backward compatibility for
+	them will be guaranteed for at least 2 years.  Most interfaces
+	(like syscalls) are expected to never change and always be
+	available.
+
+  testing/
+	This directory documents interfaces that are felt to be stable,
+	as the main development of this interface has been completed.
+	The interface can be changed to add new features, but the
+	current interface will not break by doing this, unless grave
+	errors or security problems are found in them.  Userspace
+	programs can start to rely on these interfaces, but they must be
+	aware of changes that can occur before these interfaces move to
+	be marked stable.  Programs that use these interfaces are
+	strongly encouraged to add their name to the description of
+	these interfaces, so that the kernel developers can easily
+	notify them if any changes occur (see the description of the
+	layout of the files below for details on how to do this.)
+
+  obsolete/
+  	This directory documents interfaces that are still remaining in
+	the kernel, but are marked to be removed at some later point in
+	time.  The description of the interface will document the reason
+	why it is obsolete and when it can be expected to be removed.
+	The file Documentation/feature-removal-schedule.txt may describe
+	some of these interfaces, giving a schedule for when they will
+	be removed.
+
+  removed/
+	This directory contains a list of the old interfaces that have
+	been removed from the kernel.
+
+Every file in these directories will contain the following information:
+
+What:		Short description of the interface
+Date:		Date created
+KernelVersion:	Kernel version this feature first showed up in.
+Contact:	Primary contact for this interface (may be a mailing list)
+Description:	Long description of the interface and how to use it.
+Users:		All users of this interface who wish to be notified when
+		it changes.  This is very important for interfaces in
+		the "testing" stage, so that kernel developers can work
+		with userspace developers to ensure that things do not
+		break in ways that are unacceptable.  It is also
+		important to get feedback for these interfaces to make
+		sure they are working in a proper way and do not need to
+		be changed further.
+
+
+How things move between levels:
+
+Interfaces in stable may move to obsolete, as long as the proper
+notification is given.
+
+Interfaces may be removed from obsolete and the kernel as long as the
+documented amount of time has gone by.
+
+Interfaces in the testing state can move to the stable state when the
+developers feel they are finished.  They cannot be removed from the
+kernel tree without going through the obsolete state first.
+
+It's up to the developer to place their interfaces in the category they
+wish for it to start out in.
diff --git a/Documentation/ABI/obsolete/devfs b/Documentation/ABI/obsolete/devfs
new file mode 100644
index 0000000..b8b8739
--- /dev/null
+++ b/Documentation/ABI/obsolete/devfs
@@ -0,0 +1,13 @@
+What:		devfs
+Date:		July 2005
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+	devfs has been unmaintained for a number of years, has unfixable
+	races, contains a naming policy within the kernel that is
+	against the LSB, and can be replaced by using udev.
+	The files fs/devfs/*, include/linux/devfs_fs*.h will be removed,
+	along with the the assorted devfs function calls throughout the
+	kernel tree.
+
+Users:
+
diff --git a/Documentation/ABI/stable/syscalls b/Documentation/ABI/stable/syscalls
new file mode 100644
index 0000000..c3ae3e7
--- /dev/null
+++ b/Documentation/ABI/stable/syscalls
@@ -0,0 +1,10 @@
+What:		The kernel syscall interface
+Description:
+	This interface matches much of the POSIX interface and is based
+	on it and other Unix based interfaces.  It will only be added to
+	over time, and not have things removed from it.
+
+	Note that this interface is different for every architecture
+	that Linux supports.  Please see the architecture-specific
+	documentation for details on the syscall numbers that are to be
+	mapped to each syscall.
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
new file mode 100644
index 0000000..75be431
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-module
@@ -0,0 +1,30 @@
+What:		/sys/module
+Description:
+	The /sys/module tree consists of the following structure:
+
+	/sys/module/MODULENAME
+		The name of the module that is in the kernel.  This
+		module name will show up either if the module is built
+		directly into the kernel, or if it is loaded as a
+		dyanmic module.
+
+	/sys/module/MODULENAME/parameters
+		This directory contains individual files that are each
+		individual parameters of the module that are able to be
+		changed at runtime.  See the individual module
+		documentation as to the contents of these parameters and
+		what they accomplish.
+
+		Note: The individual parameter names and values are not
+		considered stable, only the fact that they will be
+		placed in this location within sysfs.  See the
+		individual driver documentation for details as to the
+		stability of the different parameters.
+
+	/sys/module/MODULENAME/refcnt
+		If the module is able to be unloaded from the kernel, this file
+		will contain the current reference count of the module.
+
+		Note: If the module is built into the kernel, or if the
+		CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+		this file will not be present.
diff --git a/Documentation/ABI/testing/sysfs-class b/Documentation/ABI/testing/sysfs-class
new file mode 100644
index 0000000..4b0cb89
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class
@@ -0,0 +1,16 @@
+What:		/sys/class/
+Date:		Febuary 2006
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		The /sys/class directory will consist of a group of
+		subdirectories describing individual classes of devices
+		in the kernel.  The individual directories will consist
+		of either subdirectories, or symlinks to other
+		directories.
+
+		All programs that use this directory tree must be able
+		to handle both subdirectories or symlinks in order to
+		work properly.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>
diff --git a/Documentation/ABI/testing/sysfs-devices b/Documentation/ABI/testing/sysfs-devices
new file mode 100644
index 0000000..6a25671
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices
@@ -0,0 +1,25 @@
+What:		/sys/devices
+Date:		February 2006
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		The /sys/devices tree contains a snapshot of the
+		internal state of the kernel device tree.  Devices will
+		be added and removed dynamically as the machine runs,
+		and between different kernel versions, the layout of the
+		devices within this tree will change.
+
+		Please do not rely on the format of this tree because of
+		this.  If a program wishes to find different things in
+		the tree, please use the /sys/class structure and rely
+		on the symlinks there to point to the proper location
+		within the /sys/devices tree of the individual devices.
+		Or rely on the uevent messages to notify programs of
+		devices being added and removed from this tree to find
+		the location of those devices.
+
+		Note that sometimes not all devices along the directory
+		chain will have emitted uevent messages, so userspace
+		programs must be able to handle such occurrences.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>
-- 
1.4.0


  reply	other threads:[~2006-06-21 19:49 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-21 19:45 [GIT PATCH] Driver Core patches for 2.6.17 Greg KH
2006-06-21 19:45 ` [PATCH 1/22] [PATCH] kobject: make people pay attention to kobject_add errors Greg KH
2006-06-21 19:45   ` Greg KH [this message]
2006-06-21 19:45     ` [PATCH 3/22] [PATCH] CCISS: add device symlink to the block cciss block devices in sysfs Greg KH
2006-06-21 19:45       ` [PATCH 4/22] [PATCH] Driver core: bus device event delay Greg KH
2006-06-21 19:45         ` [PATCH 5/22] [PATCH] TTY: return class device pointer from tty_register_device() Greg KH
2006-06-21 19:45           ` [PATCH 6/22] [PATCH] i4l gigaset: move sysfs entry to tty class device Greg KH
2006-06-21 19:45             ` [PATCH 7/22] [PATCH] Driver core: class_device_add needs error checks Greg KH
2006-06-21 19:45               ` [PATCH 8/22] [PATCH] Driver Core: CONFIG_DEBUG_PM covers drivers/base/power too Greg KH
2006-06-21 19:45                 ` [PATCH 9/22] [PATCH] platform_bus learns about modalias Greg KH
2006-06-21 19:45                   ` [PATCH 10/22] [PATCH] Driver Core: remove unused exports Greg KH
2006-06-21 19:45                     ` [PATCH 11/22] [PATCH] Driver Core: Allow sysdev_class have attributes Greg KH
2006-06-21 19:45                       ` [PATCH 12/22] [PATCH] Driver Core: Fix platform_device_add to use device_add Greg KH
2006-06-21 19:45                         ` [PATCH 13/22] [PATCH] Driver Core: Add /sys/hypervisor when needed Greg KH
2006-06-21 19:45                           ` [PATCH 14/22] [PATCH] remove duplication from Documentation/power/devices.txt Greg KH
2006-06-21 19:45                             ` [PATCH 15/22] [PATCH] Driver core: PM_DEBUG device suspend() messages become informative Greg KH
2006-06-21 19:45                               ` [PATCH 16/22] [PATCH] firmware_class: s/semaphores/mutexes Greg KH
2006-06-21 19:46                                 ` [PATCH 17/22] [PATCH] Driver core: change make_class_name() to take kobjects Greg KH
2006-06-21 19:46                                   ` [PATCH 18/22] [PATCH] Driver core: allow struct device to have a dev_t Greg KH
2006-06-21 19:46                                     ` [PATCH 19/22] [PATCH] Driver core: add generic "subsystem" link to all devices Greg KH
2006-06-21 19:46                                       ` [PATCH 20/22] [PATCH] Driver core: add proper symlinks for devices Greg KH
2006-06-21 19:46                                         ` [PATCH 21/22] [PATCH] Driver Core: Make dev_info and friends print the bus name if there is no driver Greg KH
2006-06-21 19:46                                           ` [PATCH 22/22] [PATCH] Driver model: add ISA bus Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11509191682051-git-send-email-greg@kroah.com \
    --to=greg@kroah.com \
    --cc=gregkh@suse.de \
    --cc=kay.sievers@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.