From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH 2/5] tg3: Add rx BD workaround
Date: Thu, 29 Jun 2006 18:29:14 -0700 [thread overview]
Message-ID: <1151630955.21798.18.camel@rh4> (raw)
Add workaround to limit the burst size of rx BDs being DMA'ed to the
chip. This works around hardware errata on a number of 5750, 5752,
and 5755 chips.
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 2447fa3..c32655c 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3195,7 +3195,7 @@ static int tg3_vlan_rx(struct tg3 *tp, s
*/
static int tg3_rx(struct tg3 *tp, int budget)
{
- u32 work_mask;
+ u32 work_mask, rx_std_posted = 0;
u32 sw_idx = tp->rx_rcb_ptr;
u16 hw_idx;
int received;
@@ -3222,6 +3222,7 @@ static int tg3_rx(struct tg3 *tp, int bu
mapping);
skb = tp->rx_std_buffers[desc_idx].skb;
post_ptr = &tp->rx_std_ptr;
+ rx_std_posted++;
} else if (opaque_key == RXD_OPAQUE_RING_JUMBO) {
dma_addr = pci_unmap_addr(&tp->rx_jumbo_buffers[desc_idx],
mapping);
@@ -3309,6 +3310,15 @@ static int tg3_rx(struct tg3 *tp, int bu
next_pkt:
(*post_ptr)++;
+
+ if (unlikely(rx_std_posted >= tp->rx_std_max_post)) {
+ u32 idx = *post_ptr % TG3_RX_RING_SIZE;
+
+ tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX +
+ TG3_64BIT_REG_LOW, idx);
+ work_mask &= ~RXD_OPAQUE_RING_STD;
+ rx_std_posted = 0;
+ }
next_pkt_nopost:
sw_idx++;
sw_idx %= TG3_RX_RCB_RING_SIZE(tp);
@@ -5981,7 +5991,13 @@ static int tg3_reset_hw(struct tg3 *tp,
}
/* Setup replenish threshold. */
- tw32(RCVBDI_STD_THRESH, tp->rx_pending / 8);
+ val = tp->rx_pending / 8;
+ if (val == 0)
+ val = 1;
+ else if (val > tp->rx_std_max_post)
+ val = tp->rx_std_max_post;
+
+ tw32(RCVBDI_STD_THRESH, val);
/* Initialize TG3_BDINFO's at:
* RCVDBDI_STD_BD: standard eth size rx ring
@@ -10545,6 +10561,16 @@ static int __devinit tg3_get_invariants(
(tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0)
tp->rx_offset = 0;
+ tp->rx_std_max_post = TG3_RX_RING_SIZE;
+
+ /* Increment the rx prod index on the rx std ring by at most
+ * 8 for these chips to workaround hw errata.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
+ tp->rx_std_max_post = 8;
+
/* By default, disable wake-on-lan. User can change this
* using ETHTOOL_SWOL.
*/
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 8209da5..e9177f8 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2137,6 +2137,7 @@ struct tg3 {
struct tg3_rx_buffer_desc *rx_std;
struct ring_info *rx_std_buffers;
dma_addr_t rx_std_mapping;
+ u32 rx_std_max_post;
struct tg3_rx_buffer_desc *rx_jumbo;
struct ring_info *rx_jumbo_buffers;
next reply other threads:[~2006-06-30 1:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-30 1:29 Michael Chan [this message]
2006-06-30 3:14 ` [PATCH 2/5] tg3: Add rx BD workaround David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1151630955.21798.18.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.