From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH] tg3: Add ipv6 TSO feature
Date: Fri, 30 Jun 2006 16:35:12 -0700 [thread overview]
Message-ID: <1151710512.3645.5.camel@rh4> (raw)
Enable ipv6 TSO feature on chips that support it.
Update version to 3.61.
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 47c96fc..b992c0a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.61"
-#define DRV_MODULE_RELDATE "June 29, 2006"
+#define DRV_MODULE_VERSION "3.62"
+#define DRV_MODULE_RELDATE "June 30, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -3799,18 +3799,24 @@ static int tg3_start_xmit(struct sk_buff
goto out_unlock;
}
- tcp_opt_len = ((skb->h.th->doff - 5) * 4);
- ip_tcp_len = (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
+ mss |= (skb_headlen(skb) - ETH_HLEN) << 9;
+ else {
+ tcp_opt_len = ((skb->h.th->doff - 5) * 4);
+ ip_tcp_len = (skb->nh.iph->ihl * 4) +
+ sizeof(struct tcphdr);
+
+ skb->nh.iph->check = 0;
+ skb->nh.iph->tot_len = htons(mss + ip_tcp_len +
+ tcp_opt_len);
+ mss |= (ip_tcp_len + tcp_opt_len) << 9;
+ }
base_flags |= (TXD_FLAG_CPU_PRE_DMA |
TXD_FLAG_CPU_POST_DMA);
- skb->nh.iph->check = 0;
- skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
-
skb->h.th->check = 0;
- mss |= (ip_tcp_len + tcp_opt_len) << 9;
}
else if (skb->ip_summed == CHECKSUM_HW)
base_flags |= TXD_FLAG_TCPUDP_CSUM;
@@ -7888,6 +7894,12 @@ static int tg3_set_tso(struct net_device
return -EINVAL;
return 0;
}
+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) {
+ if (value)
+ dev->features |= NETIF_F_TSO6;
+ else
+ dev->features &= ~NETIF_F_TSO6;
+ }
return ethtool_op_set_tso(dev, value);
}
#endif
@@ -11508,8 +11520,11 @@ static int __devinit tg3_init_one(struct
* Firmware TSO on older chips gives lower performance, so it
* is off by default, but can be enabled using ethtool.
*/
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
dev->features |= NETIF_F_TSO;
+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)
+ dev->features |= NETIF_F_TSO6;
+ }
#endif
next reply other threads:[~2006-06-30 23:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-30 23:35 Michael Chan [this message]
2006-07-04 2:42 ` [PATCH] tg3: Add ipv6 TSO feature David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1151710512.3645.5.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.