All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, lkml@rtr.ca, axboe@suse.de,
	forrest.zhao@intel.com, alan@lxorguk.ukuu.org.uk,
	linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 11/11] sata_sil24: add suspend/sleep support
Date: Mon, 3 Jul 2006 16:07:27 +0900	[thread overview]
Message-ID: <11519104471143-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11519104451998-git-send-email-htejun@gmail.com>

Add suspend/sleep support.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/sata_sil24.c |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

44ecebd2a8841e439bea118f9014f509ce05b553
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 16565e2..b8e590d 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -92,6 +92,7 @@ enum {
 	HOST_CTRL_STOP		= (1 << 18), /* latched PCI STOP */
 	HOST_CTRL_DEVSEL	= (1 << 19), /* latched PCI DEVSEL */
 	HOST_CTRL_REQ64		= (1 << 20), /* latched PCI REQ64 */
+	HOST_CTRL_GLOBAL_RST	= (1 << 31), /* global reset */
 
 	/*
 	 * Port registers
@@ -338,6 +339,7 @@ static int sil24_port_start(struct ata_p
 static void sil24_port_stop(struct ata_port *ap);
 static void sil24_host_stop(struct ata_host_set *host_set);
 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil24_pci_device_resume(struct pci_dev *pdev);
 
 static const struct pci_device_id sil24_pci_tbl[] = {
 	{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
@@ -353,6 +355,8 @@ static struct pci_driver sil24_pci_drive
 	.id_table		= sil24_pci_tbl,
 	.probe			= sil24_init_one,
 	.remove			= ata_pci_remove_one, /* safe? */
+	.suspend		= ata_pci_device_suspend,
+	.resume			= sil24_pci_device_resume,
 };
 
 static struct scsi_host_template sil24_sht = {
@@ -372,6 +376,8 @@ static struct scsi_host_template sil24_s
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.suspend		= ata_scsi_device_suspend,
+	.resume			= ata_scsi_device_resume,
 };
 
 static const struct ata_port_operations sil24_ops = {
@@ -1179,6 +1185,25 @@ static int sil24_init_one(struct pci_dev
 	return rc;
 }
 
+static int sil24_pci_device_resume(struct pci_dev *pdev)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+	struct sil24_host_priv *hpriv = host_set->private_data;
+
+	ata_pci_device_do_resume(pdev);
+
+	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
+		writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL);
+
+	sil24_init_controller(pdev, host_set->n_ports,
+			      host_set->ports[0]->flags,
+			      hpriv->host_base, hpriv->port_base);
+
+	ata_host_set_resume(host_set);
+
+	return 0;
+}
+
 static int __init sil24_init(void)
 {
 	return pci_module_init(&sil24_pci_driver);
-- 
1.3.2



  parent reply	other threads:[~2006-07-03  7:06 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-07-03  7:07 [PATCHSET] new Power Management for libata, take 4 Tejun Heo
2006-07-03  7:07 ` [PATCH 02/11] libata: clean up debounce parameters and improve parameter selection Tejun Heo
2006-07-03  7:07 ` [PATCH 04/11] libata: separate out __ata_ehi_hotplugged() Tejun Heo
2006-07-03  7:07 ` [PATCH 06/11] libata: reimplement per-dev PM Tejun Heo
2006-07-03  7:07 ` [PATCH 05/11] libata: implement PM EH actions Tejun Heo
2006-07-03  7:07 ` [PATCH 03/11] libata: implement ATA_EHI_NO_AUTOPSY and QUIET Tejun Heo
2006-07-03  7:07 ` [PATCH 01/11] libata: implement ATA_EHI_RESUME_LINK Tejun Heo
2006-07-06  2:16   ` Jeff Garzik
2006-07-03  7:07 ` [PATCH 08/11] sata_sil: separate out sil_init_controller() Tejun Heo
2006-07-03  7:07 ` [PATCH 07/11] libata: reimplement controller-wide PM Tejun Heo
2006-07-03  7:07 ` Tejun Heo [this message]
2006-07-03  7:07 ` [PATCH 10/11] sata_sil24: separate out sil24_init_controller() Tejun Heo
2006-07-03  7:07 ` [PATCH 09/11] sata_sil: add suspend/sleep support Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11519104471143-git-send-email-htejun@gmail.com \
    --to=htejun@gmail.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=axboe@suse.de \
    --cc=forrest.zhao@intel.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=lkml@rtr.ca \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.