All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeremy Kerr <jk@ozlabs.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 10/20] [powerpc,chrp] Constify & voidify get_property()
Date: Tue,  4 Jul 2006 16:46:44 +1000 (EST)	[thread overview]
Message-ID: <1151993427.2210.11@pokey> (raw)

Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

chrp platform changes.

Built for chrp32_defconfig

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---

 nvram.c |    5 +++--
 pci.c   |   11 +++++------
 setup.c |   21 +++++++++------------
 3 files changed, 17 insertions(+), 20 deletions(-)

Index: linux-2.6/arch/powerpc/platforms/chrp/nvram.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/chrp/nvram.c
+++ linux-2.6/arch/powerpc/platforms/chrp/nvram.c
@@ -67,13 +67,14 @@ static void chrp_nvram_write(int addr, u
 void __init chrp_nvram_init(void)
 {
 	struct device_node *nvram;
-	unsigned int *nbytes_p, proplen;
+	const unsigned int *nbytes_p;
+	unsigned int proplen;
 
 	nvram = of_find_node_by_type(NULL, "nvram");
 	if (nvram == NULL)
 		return;
 
-	nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen);
+	nbytes_p = get_property(nvram, "#bytes", &proplen);
 	if (nbytes_p == NULL || proplen != sizeof(unsigned int))
 		return;
 
Index: linux-2.6/arch/powerpc/platforms/chrp/pci.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/chrp/pci.c
+++ linux-2.6/arch/powerpc/platforms/chrp/pci.c
@@ -214,11 +214,11 @@ void __init
 chrp_find_bridges(void)
 {
 	struct device_node *dev;
-	int *bus_range;
+	const int *bus_range;
 	int len, index = -1;
 	struct pci_controller *hose;
-	unsigned int *dma;
-	char *model, *machine;
+	const unsigned int *dma;
+	const char *model, *machine;
 	int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
 	struct device_node *root = find_path_device("/");
 	struct resource r;
@@ -246,7 +246,7 @@ chrp_find_bridges(void)
 			       dev->full_name);
 			continue;
 		}
-		bus_range = (int *) get_property(dev, "bus-range", &len);
+		bus_range = get_property(dev, "bus-range", &len);
 		if (bus_range == NULL || len < 2 * sizeof(int)) {
 			printk(KERN_WARNING "Can't get bus-range for %s\n",
 				dev->full_name);
@@ -299,8 +299,7 @@ chrp_find_bridges(void)
 
 		/* check the first bridge for a property that we can
 		   use to set pci_dram_offset */
-		dma = (unsigned int *)
-			get_property(dev, "ibm,dma-ranges", &len);
+		dma = get_property(dev, "ibm,dma-ranges", &len);
 		if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
 			pci_dram_offset = dma[2] - dma[3];
 			printk("pci_dram_offset = %lx\n", pci_dram_offset);
Index: linux-2.6/arch/powerpc/platforms/chrp/setup.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/chrp/setup.c
+++ linux-2.6/arch/powerpc/platforms/chrp/setup.c
@@ -214,8 +214,7 @@ static void __init pegasos_set_l2cr(void
 	/* Enable L2 cache if needed */
 	np = find_type_devices("cpu");
 	if (np != NULL) {
-		unsigned int *l2cr = (unsigned int *)
-			get_property (np, "l2cr", NULL);
+		const unsigned int *l2cr = get_property (np, "l2cr", NULL);
 		if (l2cr == NULL) {
 			printk ("Pegasos l2cr : no cpu l2cr property found\n");
 			return;
@@ -232,7 +231,7 @@ static void __init pegasos_set_l2cr(void
 void __init chrp_setup_arch(void)
 {
 	struct device_node *root = find_path_device ("/");
-	char *machine = NULL;
+	const char *machine = NULL;
 
 	/* init to some ~sane value until calibrate_delay() runs */
 	loops_per_jiffy = 50000000/HZ;
@@ -332,7 +331,7 @@ static void __init chrp_find_openpic(voi
 	struct device_node *np, *root;
 	int len, i, j;
 	int isu_size, idu_size;
-	unsigned int *iranges, *opprop = NULL;
+	const unsigned int *iranges, *opprop = NULL;
 	int oplen = 0;
 	unsigned long opaddr;
 	int na = 1;
@@ -342,8 +341,7 @@ static void __init chrp_find_openpic(voi
 		return;
 	root = of_find_node_by_path("/");
 	if (root) {
-		opprop = (unsigned int *) get_property
-			(root, "platform-open-pic", &oplen);
+		opprop = get_property (root, "platform-open-pic", &oplen);
 		na = prom_n_addr_cells(root);
 	}
 	if (opprop && oplen >= na * sizeof(unsigned int)) {
@@ -360,7 +358,7 @@ static void __init chrp_find_openpic(voi
 
 	printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
 
-	iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
+	iranges = get_property(np, "interrupt-ranges", &len);
 	if (iranges == NULL)
 		len = 0;	/* non-distributed mpic */
 	else
@@ -446,8 +444,8 @@ static void __init chrp_find_8259(void)
 	 * from anyway
 	 */
 	for (np = find_devices("pci"); np != NULL; np = np->next) {
-		unsigned int *addrp = (unsigned int *)
-			get_property(np, "8259-interrupt-acknowledge", NULL);
+		const unsigned int *addrp = get_property(np,
+				"8259-interrupt-acknowledge", NULL);
 
 		if (addrp == NULL)
 			continue;
@@ -498,7 +496,7 @@ void __init
 chrp_init2(void)
 {
 	struct device_node *device;
-	unsigned int *p = NULL;
+	const unsigned int *p = NULL;
 
 #ifdef CONFIG_NVRAM
 	chrp_nvram_init();
@@ -516,8 +514,7 @@ chrp_init2(void)
 	 */
 	device = find_devices("rtas");
 	if (device)
-		p = (unsigned int *) get_property
-			(device, "rtas-event-scan-rate", NULL);
+		p = get_property(device, "rtas-event-scan-rate", NULL);
 	if (p && *p) {
 		/*
 		 * Arrange to call chrp_event_scan at least *p times

                 reply	other threads:[~2006-07-04  6:46 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1151993427.2210.11@pokey \
    --to=jk@ozlabs.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.