From: Jeremy Kerr <jk@ozlabs.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 12/20] [powerpc,powermac] Constify & voidify get_property()
Date: Tue, 4 Jul 2006 16:47:19 +1000 (EST) [thread overview]
Message-ID: <1151993427.2210.13@pokey> (raw)
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.
powermac platform & macintosh driver changes.
Built for pmac32_defconfig, g5_defconfig
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
arch/powerpc/platforms/powermac/backlight.c | 3 +-
arch/powerpc/platforms/powermac/cpufreq_32.c | 23 ++++++++--------
arch/powerpc/platforms/powermac/cpufreq_64.c | 27 ++++++++++---------
arch/powerpc/platforms/powermac/feature.c | 30 ++++++++++-----------
arch/powerpc/platforms/powermac/low_i2c.c | 24 ++++++++---------
arch/powerpc/platforms/powermac/pci.c | 37 ++++++++++++++-------------
arch/powerpc/platforms/powermac/pfunc_base.c | 2 -
arch/powerpc/platforms/powermac/pfunc_core.c | 5 ++-
arch/powerpc/platforms/powermac/setup.c | 18 +++++--------
arch/powerpc/platforms/powermac/smp.c | 7 ++---
arch/powerpc/platforms/powermac/udbg_scc.c | 10 +++----
drivers/i2c/busses/i2c-powermac.c | 3 +-
drivers/ide/ppc/pmac.c | 6 ++--
drivers/macintosh/macio_asic.c | 10 ++++---
drivers/macintosh/macio_sysfs.c | 8 ++---
drivers/macintosh/smu.c | 19 ++++++-------
drivers/macintosh/therm_adt746x.c | 8 ++---
drivers/macintosh/therm_pm72.c | 14 +++++-----
drivers/macintosh/therm_windtunnel.c | 4 +-
drivers/macintosh/via-cuda.c | 4 +-
drivers/macintosh/via-pmu-led.c | 2 -
drivers/macintosh/via-pmu.c | 10 +++----
drivers/macintosh/windfarm_pm81.c | 4 +-
drivers/macintosh/windfarm_pm91.c | 2 -
drivers/macintosh/windfarm_smu_controls.c | 13 +++++----
drivers/macintosh/windfarm_smu_sat.c | 8 ++---
drivers/macintosh/windfarm_smu_sensors.c | 12 ++++----
drivers/serial/pmac_zilog.c | 9 +++---
include/asm-powerpc/smu.h | 2 -
29 files changed, 166 insertions(+), 158 deletions(-)
Index: linux-2.6/arch/powerpc/platforms/powermac/cpufreq_32.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ linux-2.6/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -421,7 +421,7 @@ static int pmac_cpufreq_cpu_init(struct
static u32 read_gpio(struct device_node *np)
{
- u32 *reg = (u32 *)get_property(np, "reg", NULL);
+ const u32 *reg = get_property(np, "reg", NULL);
u32 offset;
if (reg == NULL)
@@ -497,7 +497,7 @@ static int pmac_cpufreq_init_MacRISC3(st
"frequency-gpio");
struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
"slewing-done");
- u32 *value;
+ const u32 *value;
/*
* Check to see if it's GPIO driven or PMU only
@@ -519,15 +519,15 @@ static int pmac_cpufreq_init_MacRISC3(st
*/
if (frequency_gpio && slew_done_gpio) {
int lenp, rc;
- u32 *freqs, *ratio;
+ const u32 *freqs, *ratio;
- freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp);
+ freqs = get_property(cpunode, "bus-frequencies", &lenp);
lenp /= sizeof(u32);
if (freqs == NULL || lenp != 2) {
printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
return 1;
}
- ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL);
+ ratio = get_property(cpunode, "processor-to-bus-ratio*2", NULL);
if (ratio == NULL) {
printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
return 1;
@@ -562,7 +562,7 @@ static int pmac_cpufreq_init_MacRISC3(st
/* If we use the PMU, look for the min & max frequencies in the
* device-tree
*/
- value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL);
+ value = get_property(cpunode, "min-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
@@ -571,7 +571,7 @@ static int pmac_cpufreq_init_MacRISC3(st
if (low_freq < 100000)
low_freq *= 10;
- value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL);
+ value = get_property(cpunode, "max-clock-frequency", NULL);
if (!value)
return 1;
hi_freq = (*value) / 1000;
@@ -611,13 +611,14 @@ static int pmac_cpufreq_init_7447A(struc
static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
{
struct device_node *volt_gpio_np;
- u32 pvr, *value;
+ u32 pvr;
+ const u32 *value;
if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
return 1;
hi_freq = cur_freq;
- value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL);
+ value = get_property(cpunode, "reduced-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
@@ -650,7 +651,7 @@ static int pmac_cpufreq_init_750FX(struc
static int __init pmac_cpufreq_setup(void)
{
struct device_node *cpunode;
- u32 *value;
+ const u32 *value;
if (strstr(cmd_line, "nocpufreq"))
return 0;
@@ -661,7 +662,7 @@ static int __init pmac_cpufreq_setup(voi
goto out;
/* Get current cpu clock freq */
- value = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ value = get_property(cpunode, "clock-frequency", NULL);
if (!value)
goto out;
cur_freq = (*value) / 1000;
Index: linux-2.6/arch/powerpc/platforms/powermac/cpufreq_64.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ linux-2.6/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -82,7 +82,7 @@ static struct freq_attr* g5_cpu_freqs_at
/* Power mode data is an array of the 32 bits PCR values to use for
* the various frequencies, retrieved from the device-tree
*/
-static u32 *g5_pmode_data;
+static const u32 *g5_pmode_data;
static int g5_pmode_max;
static int g5_pmode_cur;
@@ -381,7 +381,8 @@ static int __init g5_neo2_cpufreq_init(s
unsigned int psize, ssize;
unsigned long max_freq;
char *freq_method, *volt_method;
- u32 *valp, pvr_hi;
+ const u32 *valp;
+ u32 pvr_hi;
int use_volts_vdnap = 0;
int use_volts_smu = 0;
int rc = -ENODEV;
@@ -399,8 +400,7 @@ static int __init g5_neo2_cpufreq_init(s
/* Get first CPU node */
for (cpunode = NULL;
(cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
- u32 *reg =
- (u32 *)get_property(cpunode, "reg", NULL);
+ const u32 *reg = get_property(cpunode, "reg", NULL);
if (reg == NULL || (*reg) != 0)
continue;
if (!strcmp(cpunode->type, "cpu"))
@@ -412,7 +412,7 @@ static int __init g5_neo2_cpufreq_init(s
}
/* Check 970FX for now */
- valp = (u32 *)get_property(cpunode, "cpu-version", NULL);
+ valp = get_property(cpunode, "cpu-version", NULL);
if (!valp) {
DBG("No cpu-version property !\n");
goto bail_noprops;
@@ -424,7 +424,7 @@ static int __init g5_neo2_cpufreq_init(s
}
/* Look for the powertune data in the device-tree */
- g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize);
+ g5_pmode_data = get_property(cpunode, "power-mode-data",&psize);
if (!g5_pmode_data) {
DBG("No power-mode-data !\n");
goto bail_noprops;
@@ -432,7 +432,7 @@ static int __init g5_neo2_cpufreq_init(s
g5_pmode_max = psize / sizeof(u32) - 1;
if (use_volts_smu) {
- struct smu_sdbp_header *shdr;
+ const struct smu_sdbp_header *shdr;
/* Look for the FVT table */
shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
@@ -483,7 +483,7 @@ static int __init g5_neo2_cpufreq_init(s
* half freq in this version. So far, I haven't yet seen a machine
* supporting anything else.
*/
- valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ valp = get_property(cpunode, "clock-frequency", NULL);
if (!valp)
return -ENODEV;
max_freq = (*valp)/1000;
@@ -528,8 +528,8 @@ static int __init g5_neo2_cpufreq_init(s
static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
{
struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
- u8 *eeprom = NULL;
- u32 *valp;
+ const u8 *eeprom = NULL;
+ const u32 *valp;
u64 max_freq, min_freq, ih, il;
int has_volt = 1, rc = 0;
@@ -547,7 +547,7 @@ static int __init g5_pm72_cpufreq_init(s
/* Lookup the cpuid eeprom node */
cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
if (cpuid != NULL)
- eeprom = (u8 *)get_property(cpuid, "cpuid", NULL);
+ eeprom = get_property(cpuid, "cpuid", NULL);
if (eeprom == NULL) {
printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
rc = -ENODEV;
@@ -557,7 +557,8 @@ static int __init g5_pm72_cpufreq_init(s
/* Lookup the i2c hwclock */
for (hwclock = NULL;
(hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
- char *loc = get_property(hwclock, "hwctrl-location", NULL);
+ const char *loc = get_property(hwclock,
+ "hwctrl-location", NULL);
if (loc == NULL)
continue;
if (strcmp(loc, "CPU CLOCK"))
@@ -621,7 +622,7 @@ static int __init g5_pm72_cpufreq_init(s
*/
/* Get max frequency from device-tree */
- valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ valp = get_property(cpunode, "clock-frequency", NULL);
if (!valp) {
printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
rc = -ENODEV;
Index: linux-2.6/arch/powerpc/platforms/powermac/feature.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/feature.c
+++ linux-2.6/arch/powerpc/platforms/powermac/feature.c
@@ -1058,8 +1058,8 @@ core99_reset_cpu(struct device_node *nod
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
- u32 *num = (u32 *)get_property(np, "reg", NULL);
- u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+ u32 *num = get_property(np, "reg", NULL);
+ u32 *rst = get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
@@ -1087,7 +1087,7 @@ core99_usb_enable(struct device_node *no
{
struct macio_chip *macio;
unsigned long flags;
- char *prop;
+ const char *prop;
int number;
u32 reg;
@@ -1096,7 +1096,7 @@ core99_usb_enable(struct device_node *no
macio->type != macio_intrepid)
return -ENODEV;
- prop = (char *)get_property(node, "AAPL,clock-id", NULL);
+ prop = get_property(node, "AAPL,clock-id", NULL);
if (!prop)
return -ENODEV;
if (strncmp(prop, "usb0u048", 8) == 0)
@@ -1507,8 +1507,8 @@ static long g5_reset_cpu(struct device_n
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
- u32 *num = (u32 *)get_property(np, "reg", NULL);
- u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+ const u32 *num = get_property(np, "reg", NULL);
+ const u32 *rst = get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
@@ -2408,7 +2408,7 @@ static int __init probe_motherboard(void
*/
dt = find_devices("device-tree");
if (dt != NULL)
- model = (const char *) get_property(dt, "model", NULL);
+ model = get_property(dt, "model", NULL);
for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
pmac_mb = pmac_mb_defs[i];
@@ -2536,7 +2536,7 @@ found:
*/
static void __init probe_uninorth(void)
{
- u32 *addrp;
+ const u32 *addrp;
phys_addr_t address;
unsigned long actrl;
@@ -2555,7 +2555,7 @@ static void __init probe_uninorth(void)
if (uninorth_node == NULL)
return;
- addrp = (u32 *)get_property(uninorth_node, "reg", NULL);
+ addrp = get_property(uninorth_node, "reg", NULL);
if (addrp == NULL)
return;
address = of_translate_address(uninorth_node, addrp);
@@ -2596,7 +2596,7 @@ static void __init probe_one_macio(const
struct device_node* node;
int i;
volatile u32 __iomem *base;
- u32 *addrp, *revp;
+ const u32 *addrp, *revp;
phys_addr_t addr;
u64 size;
@@ -2639,7 +2639,7 @@ static void __init probe_one_macio(const
return;
}
if (type == macio_keylargo || type == macio_keylargo2) {
- u32 *did = (u32 *)get_property(node, "device-id", NULL);
+ const u32 *did = get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
@@ -2652,7 +2652,7 @@ static void __init probe_one_macio(const
macio_chips[i].base = base;
macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
macio_chips[i].name = macio_names[type];
- revp = (u32 *)get_property(node, "revision-id", NULL);
+ revp = get_property(node, "revision-id", NULL);
if (revp)
macio_chips[i].rev = *revp;
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
@@ -2695,15 +2695,15 @@ static void __init
initial_serial_shutdown(struct device_node *np)
{
int len;
- struct slot_names_prop {
+ const struct slot_names_prop {
int count;
char name[1];
} *slots;
- char *conn;
+ const char *conn;
int port_type = PMAC_SCC_ASYNC;
int modem = 0;
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ slots = get_property(np, "slot-names", &len);
conn = get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
Index: linux-2.6/arch/powerpc/platforms/powermac/low_i2c.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/low_i2c.c
+++ linux-2.6/arch/powerpc/platforms/powermac/low_i2c.c
@@ -477,7 +477,8 @@ static int kw_i2c_xfer(struct pmac_i2c_b
static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
{
struct pmac_i2c_host_kw *host;
- u32 *psteps, *prate, *addrp, steps;
+ const u32 *psteps, *prate, *addrp;
+ u32 steps;
host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL);
if (host == NULL) {
@@ -490,7 +491,7 @@ static struct pmac_i2c_host_kw *__init k
* on all i2c keywest nodes so far ... we would have to fallback
* to macio parsing if that wasn't the case
*/
- addrp = (u32 *)get_property(np, "AAPL,address", NULL);
+ addrp = get_property(np, "AAPL,address", NULL);
if (addrp == NULL) {
printk(KERN_ERR "low_i2c: Can't find address for %s\n",
np->full_name);
@@ -504,13 +505,13 @@ static struct pmac_i2c_host_kw *__init k
host->timeout_timer.function = kw_i2c_timeout;
host->timeout_timer.data = (unsigned long)host;
- psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
+ psteps = get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
steps >>= 1;
/* Select interface rate */
host->speed = KW_I2C_MODE_25KHZ;
- prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
+ prate = get_property(np, "AAPL,i2c-rate", NULL);
if (prate) switch(*prate) {
case 100:
host->speed = KW_I2C_MODE_100KHZ;
@@ -618,8 +619,8 @@ static void __init kw_i2c_probe(void)
} else {
for (child = NULL;
(child = of_get_next_child(np, child)) != NULL;) {
- u32 *reg =
- (u32 *)get_property(child, "reg", NULL);
+ const u32 *reg = get_property(child,
+ "reg", NULL);
if (reg == NULL)
continue;
kw_i2c_add(host, np, child, *reg);
@@ -881,7 +882,7 @@ static void __init smu_i2c_probe(void)
{
struct device_node *controller, *busnode;
struct pmac_i2c_bus *bus;
- u32 *reg;
+ const u32 *reg;
int sz;
if (!smu_present())
@@ -904,7 +905,7 @@ static void __init smu_i2c_probe(void)
if (strcmp(busnode->type, "i2c") &&
strcmp(busnode->type, "i2c-bus"))
continue;
- reg = (u32 *)get_property(busnode, "reg", NULL);
+ reg = get_property(busnode, "reg", NULL);
if (reg == NULL)
continue;
@@ -948,9 +949,8 @@ struct pmac_i2c_bus *pmac_i2c_find_bus(s
list_for_each_entry(bus, &pmac_i2c_busses, link) {
if (p == bus->busnode) {
if (prev && bus->flags & pmac_i2c_multibus) {
- u32 *reg;
- reg = (u32 *)get_property(prev, "reg",
- NULL);
+ const u32 *reg;
+ reg = get_property(prev, "reg", NULL);
if (!reg)
continue;
if (((*reg) >> 8) != bus->channel)
@@ -971,7 +971,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
u8 pmac_i2c_get_dev_addr(struct device_node *device)
{
- u32 *reg = (u32 *)get_property(device, "reg", NULL);
+ const u32 *reg = get_property(device, "reg", NULL);
if (reg == NULL)
return 0;
Index: linux-2.6/arch/powerpc/platforms/powermac/pci.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/pci.c
+++ linux-2.6/arch/powerpc/platforms/powermac/pci.c
@@ -69,16 +69,16 @@ struct device_node *k2_skiplist[2];
static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
{
for (; node != 0;node = node->sibling) {
- int * bus_range;
- unsigned int *class_code;
+ const int * bus_range;
+ const unsigned int *class_code;
int len;
/* For PCI<->PCI bridges or CardBus bridges, we go down */
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ class_code = get_property(node, "class-code", NULL);
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
continue;
- bus_range = (int *) get_property(node, "bus-range", &len);
+ bus_range = get_property(node, "bus-range", &len);
if (bus_range != NULL && len > 2 * sizeof(int)) {
if (bus_range[1] > higher)
higher = bus_range[1];
@@ -96,13 +96,15 @@ static int __init fixup_one_level_bus_ra
*/
static void __init fixup_bus_range(struct device_node *bridge)
{
- int * bus_range;
- int len;
+ int *bus_range, len;
+ struct property *prop;
/* Lookup the "bus-range" property for the hose */
- bus_range = (int *) get_property(bridge, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int))
+ prop = of_find_property(bridge, "bus-range", &len);
+ if (prop == NULL || prop->length < 2 * sizeof(int))
return;
+
+ bus_range = (int *)prop->value;
bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
}
@@ -240,7 +242,7 @@ static struct pci_ops macrisc_pci_ops =
static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
{
struct device_node *np;
- u32 *vendor, *device;
+ const u32 *vendor, *device;
if (offset >= 0x100)
return PCIBIOS_BAD_REGISTER_NUMBER;
@@ -248,8 +250,8 @@ static int chaos_validate_dev(struct pci
if (np == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
- vendor = (u32 *)get_property(np, "vendor-id", NULL);
- device = (u32 *)get_property(np, "device-id", NULL);
+ vendor = get_property(np, "vendor-id", NULL);
+ device = get_property(np, "device-id", NULL);
if (vendor == NULL || device == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -689,20 +691,21 @@ static void __init fixup_nec_usb2(void)
for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) {
struct pci_controller *hose;
- u32 data, *prop;
+ u32 data;
+ const u32 *prop;
u8 bus, devfn;
- prop = (u32 *)get_property(nec, "vendor-id", NULL);
+ prop = get_property(nec, "vendor-id", NULL);
if (prop == NULL)
continue;
if (0x1033 != *prop)
continue;
- prop = (u32 *)get_property(nec, "device-id", NULL);
+ prop = get_property(nec, "device-id", NULL);
if (prop == NULL)
continue;
if (0x0035 != *prop)
continue;
- prop = (u32 *)get_property(nec, "reg", NULL);
+ prop = get_property(nec, "reg", NULL);
if (prop == NULL)
continue;
devfn = (prop[0] >> 8) & 0xff;
@@ -901,7 +904,7 @@ static int __init add_bridge(struct devi
struct pci_controller *hose;
struct resource rsrc;
char *disp_name;
- int *bus_range;
+ const int *bus_range;
int primary = 1, has_address = 0;
DBG("Adding PCI host bridge %s\n", dev->full_name);
@@ -910,7 +913,7 @@ static int __init add_bridge(struct devi
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
/* Get bus range if any */
- bus_range = (int *) get_property(dev, "bus-range", &len);
+ bus_range = get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
Index: linux-2.6/arch/powerpc/platforms/powermac/pfunc_base.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/pfunc_base.c
+++ linux-2.6/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -114,7 +114,7 @@ static void macio_gpio_init_one(struct m
* we just create them all
*/
for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) {
- u32 *reg = (u32 *)get_property(gp, "reg", NULL);
+ const u32 *reg = get_property(gp, "reg", NULL);
unsigned long offset;
if (reg == NULL)
continue;
Index: linux-2.6/arch/powerpc/platforms/powermac/pfunc_core.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/pfunc_core.c
+++ linux-2.6/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -813,14 +813,15 @@ struct pmf_function *__pmf_find_function
struct pmf_device *dev;
struct pmf_function *func, *result = NULL;
char fname[64];
- u32 *prop, ph;
+ const u32 *prop;
+ u32 ph;
/*
* Look for a "platform-*" function reference. If we can't find
* one, then we fallback to a direct call attempt
*/
snprintf(fname, 63, "platform-%s", name);
- prop = (u32 *)get_property(target, fname, NULL);
+ prop = get_property(target, fname, NULL);
if (prop == NULL)
goto find_it;
ph = *prop;
Index: linux-2.6/arch/powerpc/platforms/powermac/smp.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/smp.c
+++ linux-2.6/arch/powerpc/platforms/powermac/smp.c
@@ -548,7 +548,7 @@ static void __init smp_core99_setup_i2c_
struct device_node *cc = NULL;
struct device_node *p;
const char *name = NULL;
- u32 *reg;
+ const u32 *reg;
int ok;
/* Look for the clock chip */
@@ -562,7 +562,7 @@ static void __init smp_core99_setup_i2c_
pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
if (pmac_tb_clock_chip_host == NULL)
continue;
- reg = (u32 *)get_property(cc, "reg", NULL);
+ reg = get_property(cc, "reg", NULL);
if (reg == NULL)
continue;
switch (*reg) {
@@ -707,8 +707,7 @@ static void __init smp_core99_setup(int
core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != NULL) {
- tbprop = (u32 *)get_property(cpu, "timebase-enable",
- NULL);
+ tbprop = get_property(cpu, "timebase-enable", NULL);
if (tbprop)
core99_tb_gpio = *tbprop;
of_node_put(cpu);
Index: linux-2.6/arch/powerpc/platforms/powermac/udbg_scc.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/udbg_scc.c
+++ linux-2.6/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -68,11 +68,11 @@ static unsigned char scc_inittab[] = {
void udbg_scc_init(int force_scc)
{
- u32 *reg;
+ const u32 *reg;
unsigned long addr;
struct device_node *stdout = NULL, *escc = NULL, *macio = NULL;
struct device_node *ch, *ch_def = NULL, *ch_a = NULL;
- char *path;
+ const char *path;
int i, x;
escc = of_find_node_by_name(NULL, "escc");
@@ -81,7 +81,7 @@ void udbg_scc_init(int force_scc)
macio = of_get_parent(escc);
if (macio == NULL)
goto bail;
- path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ path = get_property(of_chosen, "linux,stdout-path", NULL);
if (path != NULL)
stdout = of_find_node_by_path(path);
for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) {
@@ -96,13 +96,13 @@ void udbg_scc_init(int force_scc)
ch = ch_def ? ch_def : ch_a;
/* Get address within mac-io ASIC */
- reg = (u32 *)get_property(escc, "reg", NULL);
+ reg = get_property(escc, "reg", NULL);
if (reg == NULL)
goto bail;
addr = reg[0];
/* Get address of mac-io PCI itself */
- reg = (u32 *)get_property(macio, "assigned-addresses", NULL);
+ reg = get_property(macio, "assigned-addresses", NULL);
if (reg == NULL)
goto bail;
addr += reg[2];
Index: linux-2.6/arch/powerpc/platforms/powermac/backlight.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/backlight.c
+++ linux-2.6/arch/powerpc/platforms/powermac/backlight.c
@@ -38,7 +38,8 @@ int pmac_has_backlight_type(const char *
struct device_node* bk_node = find_devices("backlight");
if (bk_node) {
- char *prop = get_property(bk_node, "backlight-control", NULL);
+ const char *prop = get_property(bk_node,
+ "backlight-control", NULL);
if (prop && strncmp(prop, type, strlen(type)) == 0)
return 1;
}
Index: linux-2.6/arch/powerpc/platforms/powermac/setup.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/setup.c
+++ linux-2.6/arch/powerpc/platforms/powermac/setup.c
@@ -116,7 +116,7 @@ extern struct smp_ops_t core99_smp_ops;
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
- char *pp;
+ const char *pp;
int plen;
int mbmodel;
unsigned int mbflags;
@@ -134,12 +134,12 @@ static void pmac_show_cpuinfo(struct seq
seq_printf(m, "machine\t\t: ");
np = of_find_node_by_path("/");
if (np != NULL) {
- pp = (char *) get_property(np, "model", NULL);
+ pp = get_property(np, "model", NULL);
if (pp != NULL)
seq_printf(m, "%s\n", pp);
else
seq_printf(m, "PowerMac\n");
- pp = (char *) get_property(np, "compatible", &plen);
+ pp = get_property(np, "compatible", &plen);
if (pp != NULL) {
seq_printf(m, "motherboard\t:");
while (plen > 0) {
@@ -163,10 +163,8 @@ static void pmac_show_cpuinfo(struct seq
if (np == NULL)
np = of_find_node_by_type(NULL, "cache");
if (np != NULL) {
- unsigned int *ic = (unsigned int *)
- get_property(np, "i-cache-size", NULL);
- unsigned int *dc = (unsigned int *)
- get_property(np, "d-cache-size", NULL);
+ const unsigned int *ic = get_property(np, "i-cache-size", NULL);
+ const unsigned int *dc = get_property(np, "d-cache-size", NULL);
seq_printf(m, "L2 cache\t:");
has_l2cache = 1;
if (get_property(np, "cache-unified", NULL) != 0 && dc) {
@@ -254,7 +252,7 @@ static void __init l2cr_init(void)
if (np == 0)
np = find_type_devices("cpu");
if (np != 0) {
- unsigned int *l2cr = (unsigned int *)
+ const unsigned int *l2cr =
get_property(np, "l2cr-value", NULL);
if (l2cr != 0) {
ppc_override_l2cr = 1;
@@ -277,7 +275,7 @@ static void __init l2cr_init(void)
static void __init pmac_setup_arch(void)
{
struct device_node *cpu, *ic;
- int *fp;
+ const int *fp;
unsigned long pvr;
pvr = PVR_VER(mfspr(SPRN_PVR));
@@ -287,7 +285,7 @@ static void __init pmac_setup_arch(void)
loops_per_jiffy = 50000000 / HZ;
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != NULL) {
- fp = (int *) get_property(cpu, "clock-frequency", NULL);
+ fp = get_property(cpu, "clock-frequency", NULL);
if (fp != NULL) {
if (pvr >= 0x30 && pvr < 0x80)
/* PPC970 etc. */
Index: linux-2.6/drivers/macintosh/therm_adt746x.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/therm_adt746x.c
+++ linux-2.6/drivers/macintosh/therm_adt746x.c
@@ -47,7 +47,7 @@ static u8 FAN_SPD_SET[2] = {0x30, 0x31};
static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
-static char *sensor_location[3] = {NULL, NULL, NULL};
+static const char *sensor_location[3] = {NULL, NULL, NULL};
static int limit_adjust = 0;
static int fan_speed = -1;
@@ -553,7 +553,7 @@ static int __init
thermostat_init(void)
{
struct device_node* np;
- u32 *prop;
+ const u32 *prop;
int i = 0, offset = 0;
np = of_find_node_by_name(NULL, "fan");
@@ -566,13 +566,13 @@ thermostat_init(void)
else
return -ENODEV;
- prop = (u32 *)get_property(np, "hwsensor-params-version", NULL);
+ prop = get_property(np, "hwsensor-params-version", NULL);
printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
(*prop == 1)?"":"un");
if (*prop != 1)
return -ENODEV;
- prop = (u32 *)get_property(np, "reg", NULL);
+ prop = get_property(np, "reg", NULL);
if (!prop)
return -ENODEV;
Index: linux-2.6/drivers/macintosh/macio_asic.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/macio_asic.c
+++ linux-2.6/drivers/macintosh/macio_asic.c
@@ -139,7 +139,9 @@ static int macio_uevent(struct device *d
{
struct macio_dev * macio_dev;
struct of_device * of;
- char *scratch, *compat, *compat2;
+ char *scratch;
+ const char *compat, *compat2;
+
int i = 0;
int length, cplen, cplen2, seen = 0;
@@ -173,7 +175,7 @@ static int macio_uevent(struct device *d
* it's not really legal to split it out with commas. We split it
* up using a number of environment variables instead. */
- compat = (char *) get_property(of->node, "compatible", &cplen);
+ compat = get_property(of->node, "compatible", &cplen);
compat2 = compat;
cplen2= cplen;
while (compat && cplen > 0) {
@@ -454,7 +456,7 @@ static struct macio_dev * macio_add_one_
struct resource *parent_res)
{
struct macio_dev *dev;
- u32 *reg;
+ const u32 *reg;
if (np == NULL)
return NULL;
@@ -489,7 +491,7 @@ static struct macio_dev * macio_add_one_
#endif
MAX_NODE_NAME_SIZE, np->name);
} else {
- reg = (u32 *)get_property(np, "reg", NULL);
+ reg = get_property(np, "reg", NULL);
sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
Index: linux-2.6/drivers/macintosh/smu.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/smu.c
+++ linux-2.6/drivers/macintosh/smu.c
@@ -447,7 +447,7 @@ EXPORT_SYMBOL(smu_present);
int __init smu_init (void)
{
struct device_node *np;
- u32 *data;
+ const u32 *data;
np = of_find_node_by_type(NULL, "smu");
if (np == NULL)
@@ -483,7 +483,7 @@ int __init smu_init (void)
printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n");
goto fail;
}
- data = (u32 *)get_property(np, "reg", NULL);
+ data = get_property(np, "reg", NULL);
if (data == NULL) {
of_node_put(np);
printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
@@ -506,7 +506,7 @@ int __init smu_init (void)
np = of_find_node_by_name(NULL, "smu-interrupt");
if (np == NULL)
break;
- data = (u32 *)get_property(np, "reg", NULL);
+ data = get_property(np, "reg", NULL);
if (data == NULL) {
of_node_put(np);
break;
@@ -959,11 +959,11 @@ static struct smu_sdbp_header *smu_creat
/* Note: Only allowed to return error code in pointers (using ERR_PTR)
* when interruptible is 1
*/
-struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
- int interruptible)
+const struct smu_sdbp_header *__smu_get_sdb_partition(int id,
+ unsigned int *size, int interruptible)
{
char pname[32];
- struct smu_sdbp_header *part;
+ const struct smu_sdbp_header *part;
if (!smu)
return NULL;
@@ -980,8 +980,7 @@ struct smu_sdbp_header *__smu_get_sdb_pa
} else
mutex_lock(&smu_part_access);
- part = (struct smu_sdbp_header *)get_property(smu->of_node,
- pname, size);
+ part = get_property(smu->of_node, pname, size);
if (part == NULL) {
DPRINTK("trying to extract from SMU ...\n");
part = smu_create_sdb_partition(id);
@@ -992,7 +991,7 @@ struct smu_sdbp_header *__smu_get_sdb_pa
return part;
}
-struct smu_sdbp_header *smu_get_sdb_partition(int id, unsigned int *size)
+const struct smu_sdbp_header *smu_get_sdb_partition(int id, unsigned int *size)
{
return __smu_get_sdb_partition(id, size, 0);
}
@@ -1071,7 +1070,7 @@ static ssize_t smu_write(struct file *fi
pp->mode = smu_file_events;
return 0;
} else if (hdr.cmdtype == SMU_CMDTYPE_GET_PARTITION) {
- struct smu_sdbp_header *part;
+ const struct smu_sdbp_header *part;
part = __smu_get_sdb_partition(hdr.cmd, NULL, 1);
if (part == NULL)
return -EINVAL;
Index: linux-2.6/drivers/macintosh/therm_pm72.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/therm_pm72.c
+++ linux-2.6/drivers/macintosh/therm_pm72.c
@@ -617,7 +617,7 @@ static int read_eeprom(int cpu, struct m
{
struct device_node *np;
char nodename[64];
- u8 *data;
+ const u8 *data;
int len;
/* prom.c routine for finding a node by path is a bit brain dead
@@ -630,7 +630,7 @@ static int read_eeprom(int cpu, struct m
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid node from device-tree\n");
return -ENODEV;
}
- data = (u8 *)get_property(np, "cpuid", &len);
+ data = get_property(np, "cpuid", &len);
if (data == NULL) {
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid property from device-tree\n");
of_node_put(np);
@@ -1284,7 +1284,7 @@ static int init_backside_state(struct ba
*/
u3 = of_find_node_by_path("/u3@0,f8000000");
if (u3 != NULL) {
- u32 *vers = (u32 *)get_property(u3, "device-rev", NULL);
+ const u32 *vers = get_property(u3, "device-rev", NULL);
if (vers)
if (((*vers) & 0x3f) < 0x34)
u3h = 0;
@@ -1923,8 +1923,8 @@ static void fcu_lookup_fans(struct devic
while ((np = of_get_next_child(fcu_node, np)) != NULL) {
int type = -1;
- char *loc;
- u32 *reg;
+ const char *loc;
+ const u32 *reg;
DBG(" control: %s, type: %s\n", np->name, np->type);
@@ -1940,8 +1940,8 @@ static void fcu_lookup_fans(struct devic
continue;
/* Lookup for a matching location */
- loc = (char *)get_property(np, "location", NULL);
- reg = (u32 *)get_property(np, "reg", NULL);
+ loc = get_property(np, "location", NULL);
+ reg = get_property(np, "reg", NULL);
if (loc == NULL || reg == NULL)
continue;
DBG(" matching location: %s, reg: 0x%08x\n", loc, *reg);
Index: linux-2.6/drivers/macintosh/via-cuda.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/via-cuda.c
+++ linux-2.6/drivers/macintosh/via-cuda.c
@@ -123,7 +123,7 @@ int __init find_via_cuda(void)
{
struct adb_request req;
phys_addr_t taddr;
- u32 *reg;
+ const u32 *reg;
int err;
if (vias != 0)
@@ -132,7 +132,7 @@ int __init find_via_cuda(void)
if (vias == 0)
return 0;
- reg = (u32 *)get_property(vias, "reg", NULL);
+ reg = get_property(vias, "reg", NULL);
if (reg == NULL) {
printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
goto fail;
Index: linux-2.6/drivers/macintosh/via-pmu-led.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/via-pmu-led.c
+++ linux-2.6/drivers/macintosh/via-pmu-led.c
@@ -120,7 +120,7 @@ static int __init via_pmu_led_init(void)
dt = of_find_node_by_path("/");
if (dt == NULL)
return -ENODEV;
- model = (const char *)get_property(dt, "model", NULL);
+ model = get_property(dt, "model", NULL);
if (model == NULL)
return -ENODEV;
if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
Index: linux-2.6/drivers/macintosh/via-pmu.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/via-pmu.c
+++ linux-2.6/drivers/macintosh/via-pmu.c
@@ -287,7 +287,7 @@ static char *pbook_type[] = {
int __init find_via_pmu(void)
{
u64 taddr;
- u32 *reg;
+ const u32 *reg;
if (via != 0)
return 1;
@@ -295,7 +295,7 @@ int __init find_via_pmu(void)
if (vias == NULL)
return 0;
- reg = (u32 *)get_property(vias, "reg", NULL);
+ reg = get_property(vias, "reg", NULL);
if (reg == NULL) {
printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
goto fail;
@@ -337,7 +337,7 @@ int __init find_via_pmu(void)
gpiop = of_find_node_by_name(NULL, "gpio");
if (gpiop) {
- reg = (u32 *)get_property(gpiop, "reg", NULL);
+ reg = get_property(gpiop, "reg", NULL);
if (reg)
gaddr = of_translate_address(gpiop, reg);
if (gaddr != OF_BAD_ADDR)
@@ -486,9 +486,9 @@ static int __init via_pmu_dev_init(void)
pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
} else {
struct device_node* prim = find_devices("power-mgt");
- u32 *prim_info = NULL;
+ const u32 *prim_info = NULL;
if (prim)
- prim_info = (u32 *)get_property(prim, "prim-info", NULL);
+ prim_info = get_property(prim, "prim-info", NULL);
if (prim_info) {
/* Other stuffs here yet unknown */
pmu_battery_count = (prim_info[6] >> 16) & 0xff;
Index: linux-2.6/drivers/macintosh/windfarm_smu_controls.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_smu_controls.c
+++ linux-2.6/drivers/macintosh/windfarm_smu_controls.c
@@ -159,14 +159,15 @@ static struct smu_fan_control *smu_fan_c
int pwm_fan)
{
struct smu_fan_control *fct;
- s32 *v; u32 *reg;
- char *l;
+ const s32 *v;
+ const u32 *reg;
+ const char *l;
fct = kmalloc(sizeof(struct smu_fan_control), GFP_KERNEL);
if (fct == NULL)
return NULL;
fct->ctrl.ops = &smu_fan_ops;
- l = (char *)get_property(node, "location", NULL);
+ l = get_property(node, "location", NULL);
if (l == NULL)
goto fail;
@@ -223,17 +224,17 @@ static struct smu_fan_control *smu_fan_c
goto fail;
/* Get min & max values*/
- v = (s32 *)get_property(node, "min-value", NULL);
+ v = get_property(node, "min-value", NULL);
if (v == NULL)
goto fail;
fct->min = *v;
- v = (s32 *)get_property(node, "max-value", NULL);
+ v = get_property(node, "max-value", NULL);
if (v == NULL)
goto fail;
fct->max = *v;
/* Get "reg" value */
- reg = (u32 *)get_property(node, "reg", NULL);
+ reg = get_property(node, "reg", NULL);
if (reg == NULL)
goto fail;
fct->reg = *reg;
Index: linux-2.6/drivers/macintosh/windfarm_smu_sat.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_smu_sat.c
+++ linux-2.6/drivers/macintosh/windfarm_smu_sat.c
@@ -233,15 +233,15 @@ static void wf_sat_create(struct i2c_ada
{
struct wf_sat *sat;
struct wf_sat_sensor *sens;
- u32 *reg;
- char *loc, *type;
+ const u32 *reg;
+ const char *loc, *type;
u8 addr, chip, core;
struct device_node *child;
int shift, cpu, index;
char *name;
int vsens[2], isens[2];
- reg = (u32 *) get_property(dev, "reg", NULL);
+ reg = get_property(dev, "reg", NULL);
if (reg == NULL)
return;
addr = *reg;
@@ -268,7 +268,7 @@ static void wf_sat_create(struct i2c_ada
isens[0] = isens[1] = -1;
child = NULL;
while ((child = of_get_next_child(dev, child)) != NULL) {
- reg = (u32 *) get_property(child, "reg", NULL);
+ reg = get_property(child, "reg", NULL);
type = get_property(child, "device_type", NULL);
loc = get_property(child, "location", NULL);
if (reg == NULL || loc == NULL)
Index: linux-2.6/drivers/macintosh/windfarm_smu_sensors.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_smu_sensors.c
+++ linux-2.6/drivers/macintosh/windfarm_smu_sensors.c
@@ -198,14 +198,14 @@ static struct wf_sensor_ops smu_slotspow
static struct smu_ad_sensor *smu_ads_create(struct device_node *node)
{
struct smu_ad_sensor *ads;
- char *c, *l;
- u32 *v;
+ const char *c, *l;
+ const u32 *v;
ads = kmalloc(sizeof(struct smu_ad_sensor), GFP_KERNEL);
if (ads == NULL)
return NULL;
- c = (char *)get_property(node, "device_type", NULL);
- l = (char *)get_property(node, "location", NULL);
+ c = get_property(node, "device_type", NULL);
+ l = get_property(node, "location", NULL);
if (c == NULL || l == NULL)
goto fail;
@@ -255,7 +255,7 @@ static struct smu_ad_sensor *smu_ads_cre
} else
goto fail;
- v = (u32 *)get_property(node, "reg", NULL);
+ v = get_property(node, "reg", NULL);
if (v == NULL)
goto fail;
ads->reg = *v;
@@ -382,7 +382,7 @@ smu_cpu_power_create(struct wf_sensor *v
static void smu_fetch_param_partitions(void)
{
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
/* Get CPU voltage/current/power calibration data */
hdr = smu_get_sdb_partition(SMU_SDB_CPUVCP_ID, NULL);
Index: linux-2.6/drivers/macintosh/windfarm_pm81.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_pm81.c
+++ linux-2.6/drivers/macintosh/windfarm_pm81.c
@@ -396,7 +396,7 @@ static void wf_smu_sys_fans_tick(struct
static void wf_smu_create_cpu_fans(void)
{
struct wf_cpu_pid_param pid_param;
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
struct smu_sdbp_cpupiddata *piddata;
struct smu_sdbp_fvt *fvt;
s32 tmax, tdelta, maxpow, powadj;
@@ -702,7 +702,7 @@ static struct notifier_block wf_smu_even
static int wf_init_pm(void)
{
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
if (hdr != 0) {
Index: linux-2.6/drivers/macintosh/windfarm_pm91.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_pm91.c
+++ linux-2.6/drivers/macintosh/windfarm_pm91.c
@@ -144,7 +144,7 @@ static struct wf_smu_slots_fans_state *w
static void wf_smu_create_cpu_fans(void)
{
struct wf_cpu_pid_param pid_param;
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
struct smu_sdbp_cpupiddata *piddata;
struct smu_sdbp_fvt *fvt;
s32 tmax, tdelta, maxpow, powadj;
Index: linux-2.6/include/asm-powerpc/smu.h
===================================================================
--- linux-2.6.orig/include/asm-powerpc/smu.h
+++ linux-2.6/include/asm-powerpc/smu.h
@@ -517,7 +517,7 @@ struct smu_sdbp_cpupiddata {
* This returns the pointer to an SMU "sdb" partition data or NULL
* if not found. The data format is described below
*/
-extern struct smu_sdbp_header *smu_get_sdb_partition(int id,
+extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
unsigned int *size);
/* Get "sdb" partition data from an SMU satellite */
Index: linux-2.6/drivers/macintosh/macio_sysfs.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/macio_sysfs.c
+++ linux-2.6/drivers/macintosh/macio_sysfs.c
@@ -16,12 +16,12 @@ static ssize_t
compatible_show (struct device *dev, struct device_attribute *attr, char *buf)
{
struct of_device *of;
- char *compat;
+ const char *compat;
int cplen;
int length = 0;
of = &to_macio_device (dev)->ofdev;
- compat = (char *) get_property(of->node, "compatible", &cplen);
+ compat = get_property(of->node, "compatible", &cplen);
if (!compat) {
*buf = '\0';
return 0;
@@ -42,12 +42,12 @@ static ssize_t modalias_show (struct dev
char *buf)
{
struct of_device *of;
- char *compat;
+ const char *compat;
int cplen;
int length;
of = &to_macio_device (dev)->ofdev;
- compat = (char *) get_property (of->node, "compatible", &cplen);
+ compat = get_property(of->node, "compatible", &cplen);
if (!compat) compat = "", cplen = 1;
length = sprintf (buf, "of:N%sT%s", of->node->name, of->node->type);
buf += length;
Index: linux-2.6/drivers/macintosh/therm_windtunnel.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/therm_windtunnel.c
+++ linux-2.6/drivers/macintosh/therm_windtunnel.c
@@ -484,14 +484,14 @@ struct apple_thermal_info {
static int __init
g4fan_init( void )
{
- struct apple_thermal_info *info;
+ const struct apple_thermal_info *info;
struct device_node *np;
init_MUTEX( &x.lock );
if( !(np=of_find_node_by_name(NULL, "power-mgt")) )
return -ENODEV;
- info = (struct apple_thermal_info*)get_property(np, "thermal-info", NULL);
+ info = get_property(np, "thermal-info", NULL);
of_node_put(np);
if( !info || !machine_is_compatible("PowerMac3,6") )
Index: linux-2.6/drivers/i2c/busses/i2c-powermac.c
===================================================================
--- linux-2.6.orig/drivers/i2c/busses/i2c-powermac.c
+++ linux-2.6/drivers/i2c/busses/i2c-powermac.c
@@ -209,7 +209,8 @@ static int i2c_powermac_probe(struct dev
struct pmac_i2c_bus *bus = dev->platform_data;
struct device_node *parent = NULL;
struct i2c_adapter *adapter;
- char name[32], *basename;
+ char name[32];
+ const char *basename;
int rc;
if (bus == NULL)
Index: linux-2.6/drivers/ide/ppc/pmac.c
===================================================================
--- linux-2.6.orig/drivers/ide/ppc/pmac.c
+++ linux-2.6/drivers/ide/ppc/pmac.c
@@ -1154,7 +1154,7 @@ static int
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
struct device_node *np = pmif->node;
- int *bidp;
+ const int *bidp;
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
@@ -1176,14 +1176,14 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
pmif->broken_dma = 1;
}
- bidp = (int *)get_property(np, "AAPL,bus-id", NULL);
+ bidp = get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
/* Get cable type from device-tree */
if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6) {
- char* cable = get_property(np, "cable-type", NULL);
+ const char* cable = get_property(np, "cable-type", NULL);
if (cable && !strncmp(cable, "80-", 3))
pmif->cable_80 = 1;
}
Index: linux-2.6/drivers/serial/pmac_zilog.c
===================================================================
--- linux-2.6.orig/drivers/serial/pmac_zilog.c
+++ linux-2.6/drivers/serial/pmac_zilog.c
@@ -1400,8 +1400,8 @@ static struct uart_ops pmz_pops = {
static int __init pmz_init_port(struct uart_pmac_port *uap)
{
struct device_node *np = uap->node;
- char *conn;
- struct slot_names_prop {
+ const char *conn;
+ const struct slot_names_prop {
int count;
char name[1];
} *slots;
@@ -1458,7 +1458,7 @@ no_dma:
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
uap->port_type = PMAC_SCC_ASYNC;
/* 1999 Powerbook G3 has slot-names property instead */
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ slots = get_property(np, "slot-names", &len);
if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
@@ -1470,7 +1470,8 @@ no_dma:
if (ZS_IS_INTMODEM(uap)) {
struct device_node* i2c_modem = find_devices("i2c-modem");
if (i2c_modem) {
- char* mid = get_property(i2c_modem, "modem-id", NULL);
+ const char* mid =
+ get_property(i2c_modem, "modem-id", NULL);
if (mid) switch(*mid) {
case 0x04 :
case 0x05 :
reply other threads:[~2006-07-04 6:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1151993427.2210.13@pokey \
--to=jk@ozlabs.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.