All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeremy Kerr <jk@ozlabs.org>
To: linuxppc-dev@ozlabs.org
Cc: netdev@oss.sgi.com, cbe-oss-dev@ozlabs.org
Subject: [PATCH 15/20] [powerpc,netdevices] Constify & voidify get_property()
Date: Tue,  4 Jul 2006 16:47:17 +1000 (EST)	[thread overview]
Message-ID: <1151993427.2210.16@pokey> (raw)

Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

powerpc-specific network device driver changes.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---

 bmac.c       |   13 ++++++++-----
 mace.c       |    2 +-
 spider_net.c |   12 ++++++------
 sungem.c     |    2 +-
 4 files changed, 16 insertions(+), 13 deletions(-)

Index: linux-2.6/drivers/net/bmac.c
===================================================================
--- linux-2.6.orig/drivers/net/bmac.c
+++ linux-2.6/drivers/net/bmac.c
@@ -1264,7 +1264,8 @@ static int __devinit bmac_probe(struct m
 {
	int j, rev, ret;
	struct bmac_data *bp;
-	unsigned char *addr;
+	const unsigned char *prop_addr;
+	unsigned char addr[6];
	struct net_device *dev;
	int is_bmac_plus = ((int)match->data) != 0;
 
@@ -1272,14 +1273,16 @@ static int __devinit bmac_probe(struct m
		printk(KERN_ERR "BMAC: can't use, need 3 addrs and 3 intrs\n");
		return -ENODEV;
	}
-	addr = get_property(macio_get_of_node(mdev), "mac-address", NULL);
-	if (addr == NULL) {
-		addr = get_property(macio_get_of_node(mdev), "local-mac-address", NULL);
-		if (addr == NULL) {
+	prop_addr = get_property(macio_get_of_node(mdev), "mac-address", NULL);
+	if (prop_addr == NULL) {
+		prop_addr = get_property(macio_get_of_node(mdev),
+				"local-mac-address", NULL);
+		if (prop_addr == NULL) {
			printk(KERN_ERR "BMAC: Can't get mac-address\n");
			return -ENODEV;
		}
	}
+	memcpy(addr, prop_addr, sizeof(addr));
 
	dev = alloc_etherdev(PRIV_BYTES);
	if (!dev) {
Index: linux-2.6/drivers/net/mace.c
===================================================================
--- linux-2.6.orig/drivers/net/mace.c
+++ linux-2.6/drivers/net/mace.c
@@ -113,7 +113,7 @@ static int __devinit mace_probe(struct m
	struct device_node *mace = macio_get_of_node(mdev);
	struct net_device *dev;
	struct mace_data *mp;
-	unsigned char *addr;
+	const unsigned char *addr;
	int j, rev, rc = -EBUSY;
 
	if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) {
Index: linux-2.6/drivers/net/sungem.c
===================================================================
--- linux-2.6.orig/drivers/net/sungem.c
+++ linux-2.6/drivers/net/sungem.c
@@ -2896,7 +2896,7 @@ static int __devinit gem_get_device_addr
	if (use_idprom)
		memcpy(dev->dev_addr, idprom->id_ethaddr, 6);
 #elif defined(CONFIG_PPC_PMAC)
-	unsigned char *addr;
+	const unsigned char *addr;
 
	addr = get_property(gp->of_node, "local-mac-address", NULL);
	if (addr == NULL) {
Index: linux-2.6/drivers/net/spider_net.c
===================================================================
--- linux-2.6.orig/drivers/net/spider_net.c
+++ linux-2.6/drivers/net/spider_net.c
@@ -1812,10 +1812,10 @@ spider_net_setup_phy(struct spider_net_c
  */
 static int
 spider_net_download_firmware(struct spider_net_card *card,
-			     u8 *firmware_ptr)
+			     const void *firmware_ptr)
 {
 	int sequencer, i;
-	u32 *fw_ptr = (u32 *)firmware_ptr;
+	const u32 *fw_ptr = firmware_ptr;
 
 	/* stop sequencers */
 	spider_net_write_reg(card, SPIDER_NET_GSINIT,
@@ -1872,7 +1872,7 @@ spider_net_init_firmware(struct spider_n
 {
 	struct firmware *firmware = NULL;
 	struct device_node *dn;
-	u8 *fw_prop = NULL;
+	const u8 *fw_prop = NULL;
 	int err = -ENOENT;
 	int fw_size;
 
@@ -1898,7 +1898,7 @@ try_host_fw:
 	if (!dn)
 		goto out_err;
 
-	fw_prop = (u8 *)get_property(dn, "firmware", &fw_size);
+	fw_prop = get_property(dn, "firmware", &fw_size);
 	if (!fw_prop)
 		goto out_err;
 
@@ -2058,7 +2058,7 @@ spider_net_setup_netdev(struct spider_ne
 	struct net_device *netdev = card->netdev;
 	struct device_node *dn;
 	struct sockaddr addr;
-	u8 *mac;
+	const u8 *mac;
 
 	SET_MODULE_OWNER(netdev);
 	SET_NETDEV_DEV(netdev, &card->pdev->dev);
@@ -2089,7 +2089,7 @@ spider_net_setup_netdev(struct spider_ne
 	if (!dn)
 		return -EIO;
 
-	mac = (u8 *)get_property(dn, "local-mac-address", NULL);
+	mac = get_property(dn, "local-mac-address", NULL);
 	if (!mac)
 		return -EIO;
 	memcpy(addr.sa_data, mac, ETH_ALEN);

             reply	other threads:[~2006-07-04  6:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-07-04  6:47 Jeremy Kerr [this message]
     [not found] <98457831@toto.iv>
2006-07-07 10:35 ` [PATCH 15/20] [powerpc, netdevices] Constify & voidify get_property() Paul Mackerras
2006-07-10  3:40   ` Jeremy Kerr
2006-07-10 12:43     ` Paul Mackerras

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1151993427.2210.16@pokey \
    --to=jk@ozlabs.org \
    --cc=cbe-oss-dev@ozlabs.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=netdev@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.