From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, lkml@rtr.ca,
forrest.zhao@intel.com, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 16/17] libata-link: update hotplug to handle PMP links
Date: Sat, 8 Jul 2006 14:45:38 +0900 [thread overview]
Message-ID: <11523375383786-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11523375353473-git-send-email-htejun@gmail.com>
Update hotplug to handle PMP links. When PMP is attached, the PMP
number corresponds to I of SCSI C:H:I:L.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 7 ++-
drivers/scsi/libata-scsi.c | 109 +++++++++++++++++++++++++++++++-------------
2 files changed, 81 insertions(+), 35 deletions(-)
ca948d6e6db6fa8c27ea7f8bd72ff276b9a7f774
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 3604fce..4088498 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5694,6 +5694,7 @@ err_free_ret:
void ata_port_detach(struct ata_port *ap)
{
unsigned long flags;
+ struct ata_link *link;
struct ata_device *dev;
if (!ap->ops->error_handler)
@@ -5711,8 +5712,10 @@ void ata_port_detach(struct ata_port *ap
*/
spin_lock_irqsave(ap->lock, flags);
- ata_link_for_each_dev(dev, &ap->link)
- ata_dev_disable(dev);
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link)
+ ata_dev_disable(dev);
+ }
spin_unlock_irqrestore(ap->lock, flags);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 8c0229b..7e33506 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2466,8 +2466,14 @@ static unsigned int atapi_xlat(struct at
static struct ata_device * ata_find_dev(struct ata_port *ap, int id)
{
- if (likely(id < ata_link_max_devices(&ap->link)))
- return &ap->link.device[id];
+ if (ap->nr_pmp_links == 0) {
+ if (likely(id < ata_link_max_devices(&ap->link)))
+ return &ap->link.device[id];
+ } else {
+ if (likely(id < ap->nr_pmp_links))
+ return &ap->pmp_link[id].device[0];
+ }
+
return NULL;
}
@@ -2920,21 +2926,30 @@ void ata_scsi_simulate(struct ata_device
void ata_scsi_scan_host(struct ata_port *ap)
{
+ struct ata_link *link;
struct ata_device *dev;
if (ap->flags & ATA_FLAG_DISABLED)
return;
- ata_link_for_each_dev(dev, &ap->link) {
- struct scsi_device *sdev;
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link) {
+ struct scsi_device *sdev;
+ int devno;
- if (!ata_dev_enabled(dev) || dev->sdev)
- continue;
+ if (!ata_dev_enabled(dev) || dev->sdev)
+ continue;
+
+ if (ata_is_host_link(link))
+ devno = dev->devno;
+ else
+ devno = link->pmp;
- sdev = __scsi_add_device(ap->host, 0, dev->devno, 0, NULL);
- if (!IS_ERR(sdev)) {
- dev->sdev = sdev;
- scsi_device_put(sdev);
+ sdev = __scsi_add_device(ap->host, 0, devno, 0, NULL);
+ if (!IS_ERR(sdev)) {
+ dev->sdev = sdev;
+ scsi_device_put(sdev);
+ }
}
}
}
@@ -3022,6 +3037,25 @@ static void ata_scsi_remove_dev(struct a
}
}
+static void ata_scsi_handle_link_detach(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ata_device *dev;
+
+ ata_link_for_each_dev(dev, link) {
+ unsigned long flags;
+
+ if (!(dev->flags & ATA_DFLAG_DETACHED))
+ continue;
+
+ spin_lock_irqsave(ap->lock, flags);
+ dev->flags &= ~ATA_DFLAG_DETACHED;
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ ata_scsi_remove_dev(dev);
+ }
+}
+
/**
* ata_scsi_hotplug - SCSI part of hotplug
* @data: Pointer to ATA port to perform SCSI hotplug on
@@ -3037,7 +3071,9 @@ static void ata_scsi_remove_dev(struct a
void ata_scsi_hotplug(void *data)
{
struct ata_port *ap = data;
+ struct ata_link *link;
struct ata_device *dev;
+ int i;
if (ap->pflags & ATA_PFLAG_UNLOADING) {
DPRINTK("ENTER/EXIT - unloading\n");
@@ -3046,19 +3082,14 @@ void ata_scsi_hotplug(void *data)
DPRINTK("ENTER\n");
- /* unplug detached devices */
- ata_link_for_each_dev(dev, &ap->link) {
- unsigned long flags;
-
- if (!(dev->flags & ATA_DFLAG_DETACHED))
- continue;
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags &= ~ATA_DFLAG_DETACHED;
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_scsi_remove_dev(dev);
- }
+ /* Unplug detached devices. We cannot use link iterator here
+ * because PMP links have to be scanned even if PMP is
+ * currently not attached. Iterate manually.
+ */
+ ata_scsi_handle_link_detach(&ap->link);
+ if (ap->pmp_link)
+ for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
+ ata_scsi_handle_link_detach(&ap->pmp_link[i]);
/* scan for new ones */
ata_scsi_scan_host(ap);
@@ -3067,12 +3098,16 @@ void ata_scsi_hotplug(void *data)
* failed silently. Requeue if there are enabled but
* unattached devices.
*/
- ata_link_for_each_dev(dev, &ap->link) {
- if (ata_dev_enabled(dev) && !dev->sdev) {
- queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ);
- break;
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link) {
+ if (ata_dev_enabled(dev) && !dev->sdev) {
+ queue_delayed_work(ata_aux_wq,
+ &ap->hotplug_task, HZ);
+ goto exit_loop;
+ }
}
}
+ exit_loop:
DPRINTK("EXIT\n");
}
@@ -3097,7 +3132,6 @@ static int ata_scsi_user_scan(struct Scs
unsigned int id, unsigned int lun)
{
struct ata_port *ap = ata_shost_to_port(shost);
- struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags;
int rc = 0;
@@ -3111,12 +3145,18 @@ static int ata_scsi_user_scan(struct Scs
spin_lock_irqsave(ap->lock, flags);
if (id == SCAN_WILD_CARD) {
- ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
- ehi->action |= ATA_EH_SOFTRESET;
+ struct ata_link *link;
+
+ ata_port_for_each_link(link, ap) {
+ struct ata_eh_info *ehi = &link->eh_info;
+ ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
+ ehi->action |= ATA_EH_SOFTRESET;
+ }
} else {
struct ata_device *dev = ata_find_dev(ap, id);
if (dev) {
+ struct ata_eh_info *ehi = &dev->link->eh_info;
ehi->probe_mask |= 1 << dev->devno;
ehi->action |= ATA_EH_SOFTRESET;
ehi->flags |= ATA_EHI_RESUME_LINK;
@@ -3147,10 +3187,13 @@ static int ata_scsi_user_scan(struct Scs
void ata_scsi_dev_rescan(void *data)
{
struct ata_port *ap = data;
+ struct ata_link *link;
struct ata_device *dev;
- ata_link_for_each_dev(dev, &ap->link) {
- if (ata_dev_enabled(dev) && dev->sdev)
- scsi_rescan_device(&(dev->sdev->sdev_gendev));
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link) {
+ if (ata_dev_enabled(dev) && dev->sdev)
+ scsi_rescan_device(&(dev->sdev->sdev_gendev));
+ }
}
}
--
1.3.2
next prev parent reply other threads:[~2006-07-08 5:44 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-08 5:45 [PATCHSET 1/3] implement ata_link, take 2 Tejun Heo
2006-07-08 5:45 ` [PATCH 01/17] libata-link: separate out ata_eh_handle_dev_fail() Tejun Heo
2006-07-08 5:45 ` [PATCH 02/17] libata-link: add PMP related ATA constants Tejun Heo
2006-07-19 20:24 ` Jeff Garzik
2006-07-08 5:45 ` [PATCH 03/17] libata-link: introduce ata_link Tejun Heo
2006-07-19 20:26 ` Jeff Garzik
2006-07-24 6:19 ` Tejun Heo
2006-07-08 5:45 ` [PATCH 04/17] libata-link: implement and use link/device iterators Tejun Heo
2006-07-08 5:45 ` [PATCH 05/17] libata-link: linkify PHY-related functions Tejun Heo
2006-07-08 5:45 ` [PATCH 07/17] libata-link: linkify reset Tejun Heo
2006-07-08 5:45 ` [PATCH 06/17] libata-link: linkify EH action helpers Tejun Heo
2006-07-08 5:45 ` [PATCH 08/17] libata-link: linkify config/EH related functions Tejun Heo
2006-07-08 5:45 ` [PATCH 10/17] libata-link: implement link->reset_tries Tejun Heo
2006-07-08 5:45 ` [PATCH 13/17] libata-link: update ata_scsi_error() to handle PMP links Tejun Heo
2006-07-08 5:45 ` [PATCH 09/17] libata-link: separate out link initialization functions Tejun Heo
2006-07-08 5:45 ` [PATCH 11/17] libata-link: implement ata_link_abort() Tejun Heo
2006-07-08 5:45 ` [PATCH 12/17] libata-link: add PMP links Tejun Heo
2006-07-08 5:45 ` Tejun Heo [this message]
2006-07-08 5:45 ` [PATCH 15/17] libata-link: update EH to deal with " Tejun Heo
2006-07-08 5:45 ` [PATCH 17/17] libata-link: update Power Management to handle " Tejun Heo
2006-07-19 20:29 ` Jeff Garzik
2006-07-08 5:45 ` [PATCH 14/17] libata-link: update ata_dev_configure() to deal with " Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11523375383786-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=lkml@rtr.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.