From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.uk, lkml@rtr.ca,
forrest.zhao@intel.com, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 6/6] libata-pmp-prep: implement qc_defer helpers
Date: Sat, 8 Jul 2006 14:51:18 +0900 [thread overview]
Message-ID: <1152337878547-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11523378773934-git-send-email-htejun@gmail.com>
Implement ap->nr_active_links (the number of links with active qcs),
ap->excl_link (pointer to link which can be used by ->qc_defer and is
cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and
ata_link_active().
These can be used by ->qc_defer() to implement proper command
exclusion. This set of helpers seem enough for both sil24 (ATAPI
exclusion needed) and cmd-switching PMP.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 21 +++++++++++++++++++--
drivers/scsi/libata-eh.c | 5 +++++
include/linux/libata.h | 8 ++++++++
3 files changed, 32 insertions(+), 2 deletions(-)
e8c076ff470980da565d0c41bd95c9a1538ab561
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index f9644db..346130c 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1004,6 +1004,7 @@ unsigned ata_exec_internal(struct ata_de
struct ata_queued_cmd *qc;
unsigned int tag, preempted_tag;
u32 preempted_sactive, preempted_qc_active;
+ int preempted_nr_active_links;
DECLARE_COMPLETION_ONSTACK(wait);
unsigned long flags;
unsigned int err_mask;
@@ -1042,9 +1043,11 @@ unsigned ata_exec_internal(struct ata_de
preempted_tag = link->active_tag;
preempted_sactive = link->sactive;
preempted_qc_active = ap->qc_active;
+ preempted_nr_active_links = ap->nr_active_links;
link->active_tag = ATA_TAG_POISON;
link->sactive = 0;
ap->qc_active = 0;
+ ap->nr_active_links = 0;
/* prepare & issue qc */
qc->tf = *tf;
@@ -1114,6 +1117,7 @@ unsigned ata_exec_internal(struct ata_de
link->active_tag = preempted_tag;
link->sactive = preempted_sactive;
ap->qc_active = preempted_qc_active;
+ ap->nr_active_links = preempted_nr_active_links;
/* XXX - Some LLDDs (sata_mv) disable port on command failure.
* Until those drivers are fixed, we detect the condition
@@ -4520,10 +4524,18 @@ void __ata_qc_complete(struct ata_queued
ata_sg_clean(qc);
/* command should be marked inactive atomically with qc completion */
- if (qc->tf.protocol == ATA_PROT_NCQ)
+ if (qc->tf.protocol == ATA_PROT_NCQ) {
link->sactive &= ~(1 << qc->tag);
- else
+ if (!link->sactive)
+ ap->nr_active_links--;
+ } else {
link->active_tag = ATA_TAG_POISON;
+ ap->nr_active_links--;
+ }
+
+ /* clear exclusive status */
+ if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL))
+ ap->excl_link = NULL;
/* atapi: mark qc as inactive to prevent the interrupt handler
* from completing the command twice later, before the error handler
@@ -4694,9 +4706,14 @@ void ata_qc_issue(struct ata_queued_cmd
if (qc->tf.protocol == ATA_PROT_NCQ) {
WARN_ON(link->sactive & (1 << qc->tag));
+
+ if (!link->sactive)
+ ap->nr_active_links++;
link->sactive |= 1 << qc->tag;
} else {
WARN_ON(link->sactive);
+
+ ap->nr_active_links++;
link->active_tag = qc->tag;
}
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index e6fd54a..122226b 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -293,6 +293,7 @@ void ata_scsi_error(struct Scsi_Host *ho
ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
ap->pflags &= ~ATA_PFLAG_EH_PENDING;
+ ap->excl_link = NULL; /* don't maintain exclusion over EH */
spin_unlock_irqrestore(ap->lock, flags);
@@ -2225,6 +2226,10 @@ void ata_eh_finish(struct ata_port *ap)
}
}
}
+
+ /* make sure nr_active_links is zero after EH */
+ WARN_ON(ap->nr_active_links);
+ ap->nr_active_links = 0;
}
/**
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 8a4adce..dea1e5f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -192,6 +192,7 @@ enum {
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
ATA_QCFLAG_IO = (1 << 3), /* standard IO command */
ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
+ ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */
ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */
ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */
@@ -549,12 +550,14 @@ struct ata_port {
struct ata_queued_cmd qcmd[ATA_MAX_QUEUE];
unsigned long qc_allocated;
unsigned int qc_active;
+ int nr_active_links; /* #links with active qcs */
struct ata_link link; /* host default link */
struct ata_device __dev1; /* storage for link.device[1] */
int nr_pmp_links; /* nr of available PMP links */
struct ata_link *pmp_link; /* array of PMP links */
+ struct ata_link *excl_link; /* for PMP qc exclusion */
struct ata_host_stats stats;
struct ata_host_set *host_set;
@@ -1022,6 +1025,11 @@ static inline int ata_link_max_devices(c
return 1;
}
+static inline int ata_link_active(struct ata_link *link)
+{
+ return ata_tag_valid(link->active_tag) || link->sactive;
+}
+
static inline struct ata_link *ata_port_first_link(struct ata_port *ap)
{
if (ap->nr_pmp_links)
--
1.3.2
next prev parent reply other threads:[~2006-07-08 5:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-08 5:51 [PATCHSET 2/3] prep for PMP support, take 2 Tejun Heo
2006-07-08 5:51 ` [PATCH 1/6] libata-pmp-prep: add @new_class to ata_dev_revalidate() Tejun Heo
2006-07-08 5:51 ` [PATCH 2/6] libata-pmp-prep: make a number of functions global to libata Tejun Heo
2006-07-08 5:51 ` Tejun Heo [this message]
2006-07-08 5:51 ` [PATCH 3/6] libata-pmp-prep: separate out sata_link_hardreset() Tejun Heo
2006-07-08 5:51 ` [PATCH 4/6] libata-pmp-prep: add @is_cmd to ata_tf_to_fis() Tejun Heo
2006-07-08 5:51 ` [PATCH 5/6] libata-pmp-prep: implement ops->qc_defer() Tejun Heo
2006-07-19 20:32 ` Jeff Garzik
2006-07-24 6:21 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1152337878547-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=lkml@rtr.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.