From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: Re: [Xenomai-help] rt_intr_create returns ENOSYS ? From: Philippe Gerum In-Reply-To: <44C532B8.3070100@domain.hid> References: <44C532B8.3070100@domain.hid> Content-Type: text/plain Date: Wed, 26 Jul 2006 11:25:30 +0200 Message-Id: <1153905930.4946.63.camel@domain.hid> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Reply-To: rpm@xenomai.org List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Hannes Mayer Cc: xenomai@xenomai.org On Mon, 2006-07-24 at 22:51 +0200, Hannes Mayer wrote: > Ciao Philippe! > > Philippe Gerum wrote: > [...] > >>>> Any enlightenment very much appreciated! > >>> CONFIG_XENO_OPT_NATIVE_INTR? It's default off now. > >> Yeah, works. Thanks! :-) > >> > >> What's the reason for defaulting to off ? > >> Force users to write RTDM stuff ? > > > > This gives a strong hint about what would be a good design decision when > > crafting a device driver over Xenomai: i.e. use RTDM. > > Absolutely, but if one just wants to capture the parallel > port int, I think it's a little overkill to make a driver > for it. > > Anyway, is that documented somewhere, that > CONFIG_XENO_OPT_NATIVE_INTR is default off now and that > folks should preferably make RTDM drivers now ? > I'd suggest to add that somewhere... > It's already present in OPT_NATIVE_INTR's help section for 2.6, but this is missing for 2.4 (no Xenomai help strings available with 2.4 actually). > Tanti saluti, > Hannes. > > > _______________________________________________ > Xenomai-help mailing list > Xenomai-help@domain.hid > https://mail.gna.org/listinfo/xenomai-help -- Philippe.