[PATCH 1/2] OMAP: Add keypad driver #4

["Komal Shah" <komal_shah802003@yahoo.com>]

[-- Attachment #1: Type: text/plain, Size: 353 bytes --]

Andrew/Tony/Rusell/Dmitry,

This is a revised patch as per the review comments from the RMK
on thread:

http://lkml.org/lkml/2006/7/27/28

Please review it and give me the Ack if looks ok.

PS: omap24xx keypad code is still in omap-keypad.c.

---Komal Shah
http://komalshah.blogspot.com

-- 
http://www.fastmail.fm - The way an email service should be


[-- Attachment #2: 0001-OMAP-Add-keypad-driver.patch --]
[-- Type: application/octet-stream, Size: 15214 bytes --]

From nobody Mon Sep 17 00:00:00 2001
From: Komal Shah <komal_shah802003@yahoo.com>
Date: Fri, 28 Jul 2006 17:53:48 +0530
Subject: [PATCH 1/2] OMAP: Add keypad driver

This patch adds support for keypad driver running on different
TI OMAP(http://www.ti.com/omap) processor based boards like
OSK, H2, H3, H4, Persuas and Nokia 770.

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>

---

 drivers/input/keyboard/Kconfig       |    9 +
 drivers/input/keyboard/Makefile      |    1 
 drivers/input/keyboard/omap-keypad.c |  492 ++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-omap/keypad.h   |    3 
 4 files changed, 505 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/keyboard/omap-keypad.c

41ffc24006a15003d5c8d17c5cc890baae2da4a3
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a9dda56..83eac3a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -183,4 +183,13 @@ config KEYBOARD_HIL
 	  This driver implements support for HIL-keyboards attached
 	  to your machine, so normally you should say Y here.
 
+config KEYBOARD_OMAP
+	tristate "TI OMAP keypad support"
+	depends on (ARCH_OMAP1 || ARCH_OMAP2)
+	help
+	  Say Y here if you want to use the OMAP keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called omap-keypad.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 2708167..b265391 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -15,4 +15,5 @@ obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikb
 obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_OMAP)             += omap-keypad.o
 
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
new file mode 100644
index 0000000..99ffd6a
--- /dev/null
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -0,0 +1,492 @@
+/*
+ * linux/drivers/input/keyboard/omap-keypad.c
+ *
+ * OMAP Keypad Driver
+ *
+ * Copyright (C) 2003 Nokia Corporation
+ * Written by Timo Teräs <ext-timo.teras@nokia.com>
+ *
+ * Added support for H2 & H3 Keypad
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/menelaus.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/arch/mux.h>
+
+#undef NEW_BOARD_LEARNING_MODE
+
+static void omap_kp_tasklet(unsigned long);
+static void omap_kp_timer(unsigned long);
+
+static unsigned char keypad_state[8];
+static DEFINE_MUTEX(kp_enable_mutex);
+static int kp_enable = 1;
+static int kp_cur_group = -1;
+
+struct omap_kp {
+	struct input_dev *input;
+	struct timer_list timer;
+	int irq;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned long delay;
+	unsigned int debounce;
+};
+
+DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
+
+static int *keymap;
+static unsigned int *row_gpios;
+static unsigned int *col_gpios;
+
+#ifdef CONFIG_ARCH_OMAP2
+static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value)
+{
+	int col;
+	for (col = 0; col < omap_kp->cols; col++) {
+		if (value & (1 << col))
+			omap_set_gpio_dataout(col_gpios[col], 1);
+		else
+			omap_set_gpio_dataout(col_gpios[col], 0);
+	}
+}
+
+static u8 get_row_gpio_val(struct omap_kp *omap_kp)
+{
+	int row;
+	u8 value = 0;
+
+	for (row = 0; row < omap_kp->rows; row++) {
+		if (omap_get_gpio_datain(row_gpios[row]))
+			value |= (1 << row);
+	}
+	return value;
+}
+#else
+#define		set_col_gpio_val(x, y)	do {} while (0)
+#define		get_row_gpio_val(x)	0
+#endif
+
+static irqreturn_t omap_kp_interrupt(int irq, void *dev_id,
+				     struct pt_regs *regs)
+{
+	struct omap_kp *omap_kp = dev_id;
+
+	/* disable keyboard interrupt and schedule for handling */
+	if (cpu_is_omap24xx()) {
+		int i;
+		for (i = 0; i < omap_kp->rows; i++)
+			disable_irq(OMAP_GPIO_IRQ(row_gpios[i]));
+	} else
+		/* disable keyboard interrupt and schedule for handling */
+		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
+	tasklet_schedule(&kp_tasklet);
+
+	return IRQ_HANDLED;
+}
+
+static void omap_kp_timer(unsigned long data)
+{
+	tasklet_schedule(&kp_tasklet);
+}
+
+static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
+{
+	int col = 0;
+
+	/* read the keypad status */
+	if (cpu_is_omap24xx()) {
+		int i;
+		for (i = 0; i < omap_kp->rows; i++)
+			disable_irq(OMAP_GPIO_IRQ(row_gpios[i]));
+
+		/* read the keypad status */
+		for (col = 0; col < omap_kp->cols; col++) {
+			set_col_gpio_val(omap_kp, ~(1 << col));
+			state[col] = ~(get_row_gpio_val(omap_kp)) & 0x3f;
+		}
+		set_col_gpio_val(omap_kp, 0);
+
+	} else {
+		/* disable keyboard interrupt and schedule for handling */
+		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
+		/* read the keypad status */
+		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		for (col = 0; col < omap_kp->cols; col++) {
+			omap_writew(~(1 << col) & 0xff,
+				    OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+
+			udelay(omap_kp->delay);
+			
+			state[col] = ~omap_readw(OMAP_MPUIO_BASE +
+						 OMAP_MPUIO_KBR_LATCH) & 0xff;
+		}
+		omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		udelay(2);
+	}
+}
+
+static inline int omap_kp_find_key(int col, int row)
+{
+	int i, key;
+
+	key = KEY(col, row, 0);
+	for (i = 0; keymap[i] != 0; i++)
+		if ((keymap[i] & 0xff000000) == key)
+			return keymap[i] & 0x00ffffff;
+	return -1;
+}
+
+static void omap_kp_tasklet(unsigned long data)
+{
+	struct omap_kp *omap_kp_data = (struct omap_kp *) data;
+	unsigned char new_state[8], changed, key_down = 0;
+	int col, row;
+	int spurious = 0;
+
+	/* check for any changes */
+	omap_kp_scan_keypad(omap_kp_data, new_state);
+
+	/* check for changes and print those */
+	for (col = 0; col < omap_kp_data->cols; col++) {
+		changed = new_state[col] ^ keypad_state[col];
+		key_down |= new_state[col];
+		if (changed == 0)
+			continue;
+
+		for (row = 0; row < omap_kp_data->rows; row++) {
+			int key;
+			if (!(changed & (1 << row)))
+				continue;
+#ifdef NEW_BOARD_LEARNING_MODE
+			printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
+			       row, (new_state[col] & (1 << row)) ?
+			       "pressed" : "released");
+#else
+			key = omap_kp_find_key(col, row);
+			if (key < 0) {
+				printk(KERN_WARNING
+				      "omap-keypad: Spurious key event %d-%d\n",
+				       col, row);
+				/* We scan again after a couple of seconds */
+				spurious = 1;
+				continue;
+			}
+
+			if (!(kp_cur_group == (key & GROUP_MASK) ||
+			      kp_cur_group == -1))
+				continue;
+
+			kp_cur_group = key & GROUP_MASK;
+			input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
+					 new_state[col] & (1 << row));
+#endif
+		}
+	}
+	memcpy(keypad_state, new_state, sizeof(keypad_state));
+
+	if (key_down) {
+                int delay = HZ / 20;
+		/* some key is pressed - keep irq disabled and use timer
+		 * to poll the keypad */
+		if (spurious)
+			delay = 2 * HZ;
+		mod_timer(&omap_kp_data->timer, jiffies + delay);
+	} else {
+		/* enable interrupts */
+		if (cpu_is_omap24xx()) {
+			int i;
+			for (i = 0; i < omap_kp_data->rows; i++)
+				enable_irq(OMAP_GPIO_IRQ(row_gpios[i]));
+		} else {
+			omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+			kp_cur_group = -1;
+		}
+ 	}
+}
+
+static ssize_t omap_kp_enable_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", kp_enable);
+}
+
+static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	int state;
+
+	if (sscanf(buf, "%u", &state) != 1)
+		return -EINVAL;
+
+	if ((state != 1) && (state != 0))
+		return -EINVAL;
+
+	mutex_lock(&kp_enable_mutex);
+	if (state != kp_enable) {
+		if (state)
+			enable_irq(INT_KEYBOARD);
+		else
+			disable_irq(INT_KEYBOARD);
+		kp_enable = state;
+	}
+	mutex_unlock(&kp_enable_mutex);
+
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store);
+
+#ifdef CONFIG_PM
+static int omap_kp_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* Nothing yet */
+
+	return 0;
+}
+
+static int omap_kp_resume(struct platform_device *dev)
+{
+	/* Nothing yet */
+
+	return 0;
+}
+#else
+#define omap_kp_suspend	NULL
+#define omap_kp_resume	NULL
+#endif
+
+static int __init omap_kp_probe(struct platform_device *pdev)
+{
+	struct omap_kp *omap_kp;
+	struct input_dev *input_dev;
+	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data;
+	int i, col_idx, row_idx, irq_idx, ret;
+
+	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
+		printk(KERN_ERR "No rows, cols or keymap from pdata\n");
+		return -EINVAL;
+	}
+
+	omap_kp = kzalloc(sizeof(struct omap_kp), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!omap_kp || !input_dev) {
+		kfree(omap_kp);
+		input_free_device(input_dev);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, omap_kp);
+
+	omap_kp->input = input_dev;
+
+	/* Disable the interrupt for the MPUIO keyboard */
+	if (!cpu_is_omap24xx())
+		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
+	keymap = pdata->keymap;
+
+	if (pdata->rep)
+		set_bit(EV_REP, input_dev->evbit);
+
+	if (pdata->delay)
+		omap_kp->delay = pdata->delay;
+
+	if (pdata->row_gpios && pdata->col_gpios) {
+		row_gpios = pdata->row_gpios;
+		col_gpios = pdata->col_gpios;
+	}
+
+	omap_kp->rows = pdata->rows;
+	omap_kp->cols = pdata->cols;
+
+	if (cpu_is_omap24xx()) {
+		/* Cols: outputs */
+		for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
+			if (omap_request_gpio(col_gpios[col_idx]) < 0) {
+				printk(KERN_ERR "Failed to request"
+				       "GPIO%d for keypad\n",
+				       col_gpios[col_idx]);
+				goto err1;
+			}
+			omap_set_gpio_direction(col_gpios[col_idx], 0);
+		}
+		/* Rows: inputs */
+		for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
+			if (omap_request_gpio(row_gpios[row_idx]) < 0) {
+				printk(KERN_ERR "Failed to request"
+				       "GPIO%d for keypad\n",
+				       row_gpios[row_idx]);
+				goto err2;
+			}
+			omap_set_gpio_direction(row_gpios[row_idx], 1);
+		}
+	}
+
+	setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);
+
+	/* get the irq and init timer*/
+	tasklet_enable(&kp_tasklet);
+	kp_tasklet.data = (unsigned long) omap_kp;
+
+	ret = device_create_file(&pdev->dev, &dev_attr_enable);
+	if (ret < 0)
+		goto err2;
+
+	/* setup input device */
+	set_bit(EV_KEY, input_dev->evbit);
+	for (i = 0; keymap[i] != 0; i++)
+		set_bit(keymap[i] & KEY_MAX, input_dev->keybit);
+	input_dev->name = "omap-keypad";
+	input_dev->phys = "omap-keypad/input0";
+	input_dev->cdev.dev = &pdev->dev;
+	input_dev->private = omap_kp;
+	
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+
+	input_dev->keycode = keymap;
+	input_dev->keycodesize = sizeof(unsigned int);
+	input_dev->keycodemax = pdata->keymapsize;
+
+	ret = input_register_device(omap_kp->input);
+	if (ret < 0) {
+		printk(KERN_ERR "Unable to register omap-keypad input device\n");
+		goto err3;
+	}
+
+	if (pdata->dbounce)
+		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
+
+	/* scan current status and enable interrupt */
+	omap_kp_scan_keypad(omap_kp, keypad_state);
+	if (!cpu_is_omap24xx()) {
+		omap_kp->irq = platform_get_irq(pdev, 0);
+		if (omap_kp->irq >= 0) {
+			if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
+					"omap-keypad", omap_kp) < 0)
+				goto err4;
+		}
+		omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+	} else {
+		for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
+			if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]),
+				       	omap_kp_interrupt,
+					IRQF_TRIGGER_FALLING,
+				       	"omap-keypad", omap_kp) < 0)
+				goto err5;	
+		}
+	}
+	return 0;
+err5:
+	for (i = irq_idx-1; i >=0; i--) 
+		free_irq(row_gpios[i], 0);
+err4:
+	input_unregister_device(omap_kp->input);
+	input_dev = NULL;
+err3:
+	device_remove_file(&pdev->dev, &dev_attr_enable);
+err2:
+	for (i = row_idx-1; i >=0; i--)
+		omap_free_gpio(row_gpios[i]);
+err1:
+	for (i = col_idx-1; i >=0; i--)
+		omap_free_gpio(col_gpios[i]);
+
+	kfree(omap_kp);
+	input_free_device(input_dev);
+
+	return -EINVAL;
+}
+
+static int omap_kp_remove(struct platform_device *pdev)
+{
+	struct omap_kp *omap_kp = platform_get_drvdata(pdev);
+
+	/* disable keypad interrupt handling */
+	tasklet_disable(&kp_tasklet);
+	if (cpu_is_omap24xx()) {
+		int i;
+		for (i = 0; i < omap_kp->cols; i++)
+	    		omap_free_gpio(col_gpios[i]);
+		for (i = 0; i < omap_kp->rows; i++) {
+	    		omap_free_gpio(row_gpios[i]);
+			free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0);
+		}
+	} else {
+		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		free_irq(omap_kp->irq, 0);
+	}
+
+	del_timer_sync(&omap_kp->timer);
+	tasklet_kill(&kp_tasklet);
+
+	/* unregister everything */
+	input_unregister_device(omap_kp->input);
+
+	kfree(omap_kp);
+
+	return 0;
+}
+
+static struct platform_driver omap_kp_driver = {
+	.probe		= omap_kp_probe,
+	.remove		= omap_kp_remove,
+	.suspend	= omap_kp_suspend,
+	.resume		= omap_kp_resume,
+	.driver		= {
+		.name	= "omap-keypad",
+	},
+};
+
+static int __devinit omap_kp_init(void)
+{
+	printk(KERN_INFO "OMAP Keypad Driver\n");
+	return platform_driver_register(&omap_kp_driver);
+}
+
+static void __exit omap_kp_exit(void)
+{
+	platform_driver_unregister(&omap_kp_driver);
+}
+
+module_init(omap_kp_init);
+module_exit(omap_kp_exit);
+
+MODULE_AUTHOR("Timo Teräs");
+MODULE_DESCRIPTION("OMAP Keypad Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-omap/keypad.h b/include/asm-arm/arch-omap/keypad.h
index 8a023a9..b7f8307 100644
--- a/include/asm-arm/arch-omap/keypad.h
+++ b/include/asm-arm/arch-omap/keypad.h
@@ -14,7 +14,10 @@ struct omap_kp_platform_data {
 	int rows;
 	int cols;
 	int *keymap;
+	unsigned int keymapsize;
 	unsigned int rep:1;
+	unsigned long delay;
+	unsigned int dbounce:1;
 	/* specific to OMAP242x*/
 	unsigned int *row_gpios;
 	unsigned int *col_gpios;
-- 
1.3.3