From: Haavard Skinnemoen <hskinnemoen@atmel.com>
To: linux-arch@vger.kernel.org
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Subject: [PATCH 1/13] Generic ioremap_page_range: implementation
Date: Tue, 08 Aug 2006 14:23:03 +0200 [thread overview]
Message-ID: <11550397954098-git-send-email-hskinnemoen@atmel.com> (raw)
In-Reply-To: <11550397951750-git-send-email-hskinnemoen@atmel.com>
This patch adds a generic implementation of ioremap_page_range() in
lib/ioremap.c based on the i386 implementation. It differs from the
i386 version in the following ways:
* The PTE flags are passed as a pgprot_t argument and must be
determined up front by the arch-specific code. No additional
PTE flags are added.
* Uses set_pte_at() instead of set_pte()
* Doesn't call flush_cache_all() and flush_tlb_all(). Instead, it
calls flush_cache_vmap() after all PTEs have been set up.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
include/linux/io.h | 4 ++
lib/Makefile | 2 +
lib/ioremap.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 96 insertions(+), 1 deletions(-)
diff --git a/include/linux/io.h b/include/linux/io.h
index 420e2fd..aa3f5af 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -19,8 +19,12 @@ #ifndef _LINUX_IO_H
#define _LINUX_IO_H
#include <asm/io.h>
+#include <asm/page.h>
void __iowrite32_copy(void __iomem *to, const void *from, size_t count);
void __iowrite64_copy(void __iomem *to, const void *from, size_t count);
+int ioremap_page_range(unsigned long addr, unsigned long end,
+ unsigned long phys_addr, pgprot_t prot);
+
#endif /* _LINUX_IO_H */
diff --git a/lib/Makefile b/lib/Makefile
index be9719a..a4dcb07 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -5,7 +5,7 @@ #
lib-y := errno.o ctype.o string.o vsprintf.o cmdline.o \
bust_spinlocks.o rbtree.o radix-tree.o dump_stack.o \
idr.o div64.o int_sqrt.o bitmap.o extable.o prio_tree.o \
- sha1.o
+ sha1.o ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
diff --git a/lib/ioremap.c b/lib/ioremap.c
new file mode 100644
index 0000000..d2cb1eb
--- /dev/null
+++ b/lib/ioremap.c
@@ -0,0 +1,91 @@
+/*
+ * Re-map IO memory to kernel address space so that we can access it.
+ * This is needed for high PCI addresses that aren't mapped in the
+ * 640k-1MB IO memory area on PC's
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ */
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+
+static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
+ unsigned long end, unsigned long phys_addr, pgprot_t prot)
+{
+ pte_t *pte;
+ unsigned long pfn;
+
+ pfn = phys_addr >> PAGE_SHIFT;
+ pte = pte_alloc_kernel(pmd, addr);
+ if (!pte)
+ return -ENOMEM;
+ do {
+ BUG_ON(!pte_none(*pte));
+ set_pte_at(&init_mm, addr, pte, pfn_pte(pfn, prot));
+ pfn++;
+ } while (pte++, addr += PAGE_SIZE, addr != end);
+ return 0;
+}
+
+static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr,
+ unsigned long end, unsigned long phys_addr, pgprot_t prot)
+{
+ pmd_t *pmd;
+ unsigned long next;
+
+ phys_addr -= addr;
+ pmd = pmd_alloc(&init_mm, pud, addr);
+ if (!pmd)
+ return -ENOMEM;
+ do {
+ next = pmd_addr_end(addr, end);
+ if (ioremap_pte_range(pmd, addr, next, phys_addr + addr, prot))
+ return -ENOMEM;
+ } while (pmd++, addr = next, addr != end);
+ return 0;
+}
+
+static inline int ioremap_pud_range(pgd_t *pgd, unsigned long addr,
+ unsigned long end, unsigned long phys_addr, pgprot_t prot)
+{
+ pud_t *pud;
+ unsigned long next;
+
+ phys_addr -= addr;
+ pud = pud_alloc(&init_mm, pgd, addr);
+ if (!pud)
+ return -ENOMEM;
+ do {
+ next = pud_addr_end(addr, end);
+ if (ioremap_pmd_range(pud, addr, next, phys_addr + addr, prot))
+ return -ENOMEM;
+ } while (pud++, addr = next, addr != end);
+ return 0;
+}
+
+int ioremap_page_range(unsigned long addr,
+ unsigned long end, unsigned long phys_addr, pgprot_t prot)
+{
+ pgd_t *pgd;
+ unsigned long start;
+ unsigned long next;
+ int err;
+
+ BUG_ON(addr >= end);
+
+ start = addr;
+ phys_addr -= addr;
+ pgd = pgd_offset_k(addr);
+ do {
+ next = pgd_addr_end(addr, end);
+ err = ioremap_pud_range(pgd, addr, next, phys_addr+addr, prot);
+ if (err)
+ break;
+ } while (pgd++, addr = next, addr != end);
+
+ flush_cache_vmap(start, end);
+
+ return err;
+}
--
1.4.0
next prev parent reply other threads:[~2006-08-08 12:23 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-08 12:23 [PATCH 0/13] Generic ioremap_page_range: introduction Haavard Skinnemoen
2006-08-08 12:23 ` Haavard Skinnemoen [this message]
2006-08-08 12:23 ` [PATCH 2/13] Generic ioremap_page_range: alpha conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 3/13] Generic ioremap_page_range: arm conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 4/13] Generic ioremap_page_range: avr32 conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 5/13] Generic ioremap_page_range: cris conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 6/13] Generic ioremap_page_range: i386 conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 7/13] Generic ioremap_page_range: m32r conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 8/13] Generic ioremap_page_range: mips conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 9/13] Generic ioremap_page_range: parisc conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 10/13] Generic ioremap_page_range: s390 conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 11/13] Generic ioremap_page_range: sh conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 12/13] Generic ioremap_page_range: sh64 conversion Haavard Skinnemoen
2006-08-08 12:23 ` [PATCH 13/13] Generic ioremap_page_range: x86_64 conversion Haavard Skinnemoen
2006-08-08 12:28 ` Andi Kleen
2006-08-08 12:30 ` Jan-Benedict Glaw
2006-08-08 14:38 ` [PATCH 9/13] Generic ioremap_page_range: parisc conversion Kyle McMartin
2006-08-08 14:48 ` Kyle McMartin
2006-08-08 15:13 ` Haavard Skinnemoen
2006-08-08 15:37 ` James Bottomley
2006-08-08 22:26 ` [PATCH 0/13] Generic ioremap_page_range: introduction David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11550397954098-git-send-email-hskinnemoen@atmel.com \
--to=hskinnemoen@atmel.com \
--cc=linux-arch@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.