From mboxrd@z Thu Jan  1 00:00:00 1970
From: lists@localguru.de (Marcus Sobchak)
Date: Mon, 21 Aug 2006 18:13:47 +0000
Subject: [lm-sensors] Tyan S2720 Revsion 2.01 again
Message-Id: <1156184028.8384.22.camel@kramer>
List-Id: <lm-sensors.vger.kernel.org>
References: <1152171804.5078.26.camel@localhost.localdomain>
In-Reply-To: <1152171804.5078.26.camel@localhost.localdomain>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lm-sensors@vger.kernel.org

Hi,

Am Montag, den 21.08.2006, 10:24 -0700 schrieb Raphael Deng:
> Which CPU he use? FSB400 or FSB533? 

I use FSB400.

> If using FSB400, the CPU temp cannot be
> got from hardware monitor chip. You must use sensor in Intel Xeon CPU
> itself.

How do I do that?

Marcus


> -----????-----
> ???: Rudolf Marek [mailto:r.marek at sh.cvut.cz] 
> ????: 2006?8?19? 3:40
> ???: Marcus Sobchak
> ??: LM Sensors; Raphael Deng
> ??: Re: [lm-sensors] Tyan S2720 Revsion 2.01 again
> 
> Hello all,
> 
> Raphael have you please idea why he has still -1 temp? Tyan sensors.conf
> suggest
> to upgrade the bios, but it did not help in his case.
> 
> Please can you help?
> 
> Regards
> Rudolf
> 
> > adm1021-i2c-0-19
> > Adapter: SMBus I801 adapter at 0540
> > CPU 2 temp:
> >               -1?C  (low  =    -1?C, high =    -1?C)  ALARM (N/A,LOW)
> > 
> > adm1021-i2c-0-18
> > Adapter: SMBus I801 adapter at 0540
> > CPU 1 temp:
> >               -1?C  (low  =    -1?C, high =    -1?C)  ALARM (N/A,LOW)
> >