All of lore.kernel.org
 help / color / mirror / Atom feed
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Bonding + Shaping --> Is it Possible?
Date: Tue, 22 Aug 2006 07:55:02 +0000	[thread overview]
Message-ID: <1156233302.8448.2.camel@localhost.localdomain> (raw)
In-Reply-To: <20060817063125.22903.qmail@web8507.mail.in.yahoo.com>

So there is no difference between bonded interfaces. I mean that the
same traffic goes on both. This case you can make shaping on your bond0
interface. This will work.

Well, if the interface that looks to Clients is bond0, and interface
that looks to Internet if eth0, then you make shaping of incoming
traffic on bond0 and shaping of outgoing traffic on eth0.

В Пнд, 21/08/2006 в 17:30 +0100, KartheeK пишет:
> I have bonded two interfaces in mode 0 for load balancing and link
> sharing.
> My understanding is that "traffic control" happens, below bonding and
> hence this should be possible. I am currently short of lab equipments
> and am planning to try this some time this week end...
> I  am curious about similar implemantations and/or thoughts,,,,,,
> 
> ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË <casper@meteor.dp.ua> wrote:
>         I tryed to do some iptables rules on bonded interfaces and
>         that didn't
>         worked. I had to use "ebtables".
>         
>         BTW, what kind of bonding do you use?
>         
>         ÷ ðÎÄ, 21/08/2006 × 13:05 +0100, KartheeK ÐÉÛÅÔ:
>         > Hello All
>         > 
>         > Any Body, Any Thoughts?
>         > Any Kind of feedback or suggestion is a welcome...
>         > 
>         > KartheeK
>         > 
>         > KartheeK  wrote:
>         > Hello All,
>         > 
>         > Has Any body of you worked on such a set up?
>         > 
>         > KartheeK
>         > 
>         > KartheeK  wrote:
>         > Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST)
>         > From: KartheeK 
>         > To: lartc@mailman.ds9a.nl
>         > Subject: [LARTC] Bonding + Shaping --> Is it Possible?
>         > 
>         > Hello All,
>         > 
>         > I was curious to know if I can do traffic shaping on
>         > abonded Interface?
>         > Ex: I have to interfaces eth1 and eth2 which i have
>         > bonded together as bond0 , now the question is can I
>         > do shaping on eth1 and eth2 ??
>         > 
>         > Thanks
>         > KartheeK
>         > 
>         > 
>         > ______________________________________________________
>         > Here's a new way to find what you're looking for -
>         > Yahoo! Answers 
>         > Send FREE SMS to your friend's mobile from Yahoo!
>         > Messenger Version 8. Get it
>         > NOW_______________________________________________
>         > LARTC mailing list
>         > LARTC@mailman.ds9a.nl
>         > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>         > 
>         > 
>         > 
>         >
>         ______________________________________________________________
>         > Here's a new way to find what you're looking for - Yahoo!
>         > Answers 
>         > Send FREE SMS to your friend's mobile from Yahoo! Messenger
>         > Version 8. Get it
>         > NOW_______________________________________________
>         > LARTC mailing list
>         > LARTC@mailman.ds9a.nl
>         > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>         > _______________________________________________
>         > LARTC mailing list
>         > LARTC@mailman.ds9a.nl
>         > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>         > 
>         > 
>         > 
>         > 
>         >
>         ______________________________________________________________________
>         > Here's a new way to find what you're looking for - Yahoo!
>         Answers 
>         > Send FREE SMS to your friend's mobile from Yahoo! Messenger
>         Version 8.
>         > Get it NOW
>         > _______________________________________________
>         > LARTC mailing list
>         > LARTC@mailman.ds9a.nl
>         > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>         -- 
>         ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË 
>         
> 
> 
> 
> 
> ______________________________________________________________________
> Here's a new way to find what you're looking for - Yahoo! Answers 
> Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8.
> Get it NOW
-- 
Покотиленко Костик <casper@meteor.dp.ua>

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

      parent reply	other threads:[~2006-08-22  7:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-08-17  6:31 [LARTC] Bonding + Shaping --> Is it Possible? KartheeK
2006-08-18  3:56 ` KartheeK
2006-08-21 12:05 ` KartheeK
2006-08-21 13:23 ` 
2006-08-21 16:30 ` KartheeK
2006-08-22  7:55 `  [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1156233302.8448.2.camel@localhost.localdomain \
    --to=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.