From: Paul Fulghum <paulkf@microgate.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] synclink_gt add bisync and monosync modes
Date: Wed, 20 Sep 2006 14:33:37 -0500 [thread overview]
Message-ID: <1158780817.8905.2.camel@amdx2.microgate.com> (raw)
Add bisync and monosync serial protocol support
to the synclink_gt driver.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
--- linux-2.6.18/drivers/char/synclink_gt.c 2006-09-19 22:42:06.000000000 -0500
+++ b/drivers/char/synclink_gt.c 2006-09-20 11:57:00.000000000 -0500
@@ -461,7 +461,7 @@ static int adapter_test(struct slgt_inf
static void reset_adapter(struct slgt_info *info);
static void reset_port(struct slgt_info *info);
static void async_mode(struct slgt_info *info);
-static void hdlc_mode(struct slgt_info *info);
+static void sync_mode(struct slgt_info *info);
static void rx_stop(struct slgt_info *info);
static void rx_start(struct slgt_info *info);
@@ -881,7 +881,9 @@ static int write(struct tty_struct *tty,
if (!count)
goto cleanup;
- if (info->params.mode == MGSL_MODE_RAW) {
+ if (info->params.mode == MGSL_MODE_RAW ||
+ info->params.mode == MGSL_MODE_MONOSYNC ||
+ info->params.mode == MGSL_MODE_BISYNC) {
unsigned int bufs_needed = (count/DMABUFSIZE);
unsigned int bufs_free = free_tbuf_count(info);
if (count % DMABUFSIZE)
@@ -1897,6 +1899,8 @@ static void bh_handler(void* context)
while(rx_get_frame(info));
break;
case MGSL_MODE_RAW:
+ case MGSL_MODE_MONOSYNC:
+ case MGSL_MODE_BISYNC:
while(rx_get_buf(info));
break;
}
@@ -2362,10 +2366,9 @@ static void program_hw(struct slgt_info
rx_stop(info);
tx_stop(info);
- if (info->params.mode == MGSL_MODE_HDLC ||
- info->params.mode == MGSL_MODE_RAW ||
+ if (info->params.mode != MGSL_MODE_ASYNC ||
info->netcount)
- hdlc_mode(info);
+ sync_mode(info);
else
async_mode(info);
@@ -2564,6 +2567,10 @@ static int rx_enable(struct slgt_info *i
if (enable) {
if (!info->rx_enabled)
rx_start(info);
+ else if (enable == 2) {
+ /* force hunt mode (write 1 to RCR[3]) */
+ wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
+ }
} else {
if (info->rx_enabled)
rx_stop(info);
@@ -3748,7 +3755,7 @@ static void tx_start(struct slgt_info *i
{
if (!info->tx_enabled) {
wr_reg16(info, TCR,
- (unsigned short)(rd_reg16(info, TCR) | BIT1));
+ (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
info->tx_enabled = TRUE;
}
@@ -3775,13 +3782,18 @@ static void tx_start(struct slgt_info *i
tdma_reset(info);
/* set 1st descriptor address */
wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
- if (info->params.mode == MGSL_MODE_RAW)
+ switch(info->params.mode) {
+ case MGSL_MODE_RAW:
+ case MGSL_MODE_MONOSYNC:
+ case MGSL_MODE_BISYNC:
wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
- else
+ break;
+ default:
wr_reg32(info, TDCSR, BIT0); /* DMA enable */
+ }
}
- if (info->params.mode != MGSL_MODE_RAW) {
+ if (info->params.mode == MGSL_MODE_HDLC) {
info->tx_timer.expires = jiffies + msecs_to_jiffies(5000);
add_timer(&info->tx_timer);
}
@@ -3814,7 +3826,6 @@ static void tx_stop(struct slgt_info *in
/* reset and disable transmitter */
val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
- wr_reg16(info, TCR, val); /* clear reset */
slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
@@ -3982,7 +3993,7 @@ static void async_mode(struct slgt_info
enable_loopback(info);
}
-static void hdlc_mode(struct slgt_info *info)
+static void sync_mode(struct slgt_info *info)
{
unsigned short val;
@@ -3992,7 +4003,7 @@ static void hdlc_mode(struct slgt_info *
/* TCR (tx control)
*
- * 15..13 mode, 000=HDLC 001=raw sync
+ * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
* 12..10 encoding
* 09 CRC enable
* 08 CRC32
@@ -4006,8 +4017,11 @@ static void hdlc_mode(struct slgt_info *
*/
val = 0;
- if (info->params.mode == MGSL_MODE_RAW)
- val |= BIT13;
+ switch(info->params.mode) {
+ case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
+ case MGSL_MODE_BISYNC: val |= BIT15; break;
+ case MGSL_MODE_RAW: val |= BIT13; break;
+ }
if (info->if_mode & MGSL_INTERFACE_RTS_EN)
val |= BIT7;
@@ -4058,7 +4072,7 @@ static void hdlc_mode(struct slgt_info *
/* RCR (rx control)
*
- * 15..13 mode, 000=HDLC 001=raw sync
+ * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
* 12..10 encoding
* 09 CRC enable
* 08 CRC32
@@ -4069,8 +4083,11 @@ static void hdlc_mode(struct slgt_info *
*/
val = 0;
- if (info->params.mode == MGSL_MODE_RAW)
- val |= BIT13;
+ switch(info->params.mode) {
+ case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
+ case MGSL_MODE_BISYNC: val |= BIT15; break;
+ case MGSL_MODE_RAW: val |= BIT13; break;
+ }
switch(info->params.encoding)
{
@@ -4309,10 +4326,15 @@ static void free_rbufs(struct slgt_info
while(!done) {
/* reset current buffer for reuse */
info->rbufs[i].status = 0;
- if (info->params.mode == MGSL_MODE_RAW)
+ switch(info->params.mode) {
+ case MGSL_MODE_RAW:
+ case MGSL_MODE_MONOSYNC:
+ case MGSL_MODE_BISYNC:
set_desc_count(info->rbufs[i], info->raw_rx_size);
- else
+ break;
+ default:
set_desc_count(info->rbufs[i], DMABUFSIZE);
+ }
if (i == last)
done = 1;
@@ -4477,13 +4499,24 @@ cleanup:
static int rx_get_buf(struct slgt_info *info)
{
unsigned int i = info->rbuf_current;
+ unsigned int count;
if (!desc_complete(info->rbufs[i]))
return 0;
- DBGDATA(info, info->rbufs[i].buf, desc_count(info->rbufs[i]), "rx");
- DBGINFO(("rx_get_buf size=%d\n", desc_count(info->rbufs[i])));
- ldisc_receive_buf(info->tty, info->rbufs[i].buf,
- info->flag_buf, desc_count(info->rbufs[i]));
+ count = desc_count(info->rbufs[i]);
+ switch(info->params.mode) {
+ case MGSL_MODE_MONOSYNC:
+ case MGSL_MODE_BISYNC:
+ /* ignore residue in byte synchronous modes */
+ if (desc_residue(info->rbufs[i]))
+ count--;
+ break;
+ }
+ DBGDATA(info, info->rbufs[i].buf, count, "rx");
+ DBGINFO(("rx_get_buf size=%d\n", count));
+ if (count)
+ ldisc_receive_buf(info->tty, info->rbufs[i].buf,
+ info->flag_buf, count);
free_rbufs(info, i, i);
return 1;
}
@@ -4549,8 +4582,13 @@ static void tx_load(struct slgt_info *in
size -= count;
buf += count;
- if (!size && info->params.mode != MGSL_MODE_RAW)
- set_desc_eof(*d, 1); /* HDLC: set EOF of last desc */
+ /*
+ * set EOF bit for last buffer of HDLC frame or
+ * for every buffer in raw mode
+ */
+ if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
+ info->params.mode == MGSL_MODE_RAW)
+ set_desc_eof(*d, 1);
else
set_desc_eof(*d, 0);
--- linux-2.6.18/include/linux/synclink.h 2006-09-19 22:42:06.000000000 -0500
+++ b/include/linux/synclink.h 2006-09-20 12:05:07.000000000 -0500
@@ -1,7 +1,7 @@
/*
* SyncLink Multiprotocol Serial Adapter Driver
*
- * $Id: synclink.h,v 3.13 2006/05/23 18:25:06 paulkf Exp $
+ * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $
*
* Copyright (C) 1998-2000 by Microgate Corporation
*
@@ -124,6 +124,8 @@
#define MGSL_MODE_ASYNC 1
#define MGSL_MODE_HDLC 2
+#define MGSL_MODE_MONOSYNC 3
+#define MGSL_MODE_BISYNC 4
#define MGSL_MODE_RAW 6
#define MGSL_BUS_TYPE_ISA 1
reply other threads:[~2006-09-20 19:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1158780817.8905.2.camel@amdx2.microgate.com \
--to=paulkf@microgate.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.